Re: SAA7134 remote control | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
> was worknig on this late last night and here are my settings that are
> optinal for the card as even the radio shows up although I dont know
> how to get it working, and now none of the buttons work on the remote
>
> dmesg output
>
> saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
> saa7134[0]: board init: gpio is 80407c
> tuner 0-0060: chip found @ 0xc0 (saa7134[0])
> tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
> saa7134[0]: Huh, no eeprom present (err=-5)?
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> saa7134[0]: registered device dsp1
> saa7134[0]: registered device mixer1
> saa7130/34: v4l2 driver version 0.2.12 loaded
> saa7130/34: snapshot date 2005-03-10
> ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 7 (level, low) -> IRQ 7
> saa7134[0]: found at 0000:00:0b.0, rev: 1, irq: 7, latency: 32, mmio: 0xef005000
> saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO2000
> [card=3,insmod option]
> saa7134[0]: board init: gpio is 80407c
> saa7134[0]: there are different flyvideo cards with different tuners
> saa7134[0]: out there, you might have to use the tuner=<nr> insmod
> saa7134[0]: option to override the default value.
> saa7134[0]: registered input device for IR
> tuner 0-0060: chip found @ 0xc0 (saa7134[0])
> tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
> saa7134[0]: Huh, no eeprom present (err=-5)?
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> saa7134[0]: registered device radio0
> saa7134[0]: registered device dsp1
> saa7134[0]: registered device mixer1
>
> lspci -vvvvvvvvvvv
> 00:0b.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
> Subsystem: Philips Semiconductors: Unknown device 0000
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (3750ns min, 9500ns max)
> Interrupt: pin A routed to IRQ 7
> Region 0: Memory at ef005000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [40] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> modprobe.conf
>
> alias char-major-81 saa7134
> options saa7134 card=3 tuner=1 oss=1 ir_debug=1
>
> hope this helps
>
> Robb
>
I take the last statment back,
there was only noise on the audio with the above settings so here are
my current settings
lspci -vvvvvvvvvvvvvvvv
00:0b.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
Subsystem: Philips Semiconductors: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at ef005000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
dmesg
saa7130/34: v4l2 driver version 0.2.12 loaded
saa7130/34: snapshot date 2005-03-10
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 7 (level, low) -> IRQ 7
saa7134[0]: found at 0000:00:0b.0, rev: 1, irq: 7, latency: 32, mmio: 0xef005000
saa7134[0]: subsystem: 1131:0000, board: Avermedia AVerTV Studio 307
[card=45,insmod option]
saa7134[0]: board init: gpio is 80407f
saa7134[0]: registered input device for IR
tuner 0-0060: chip found @ 0xc0 (saa7134[0])
tuner 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles))
saa7134[0]: Huh, no eeprom present (err=-5)?
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134[0]: registered device dsp1
saa7134[0]: registered device mixer1
saa7134[0]/ir: build_key gpio=0x80407c mask=0x7c8 data=3
saa7134 IR (Avermedia AVerTV St: unknown key: key=0x03 raw=0x03 down=1
modprobe.conf
alias char-major-81 saa7134
options saa7134 card=45 tuner=1 oss=1
regards
Robb
--
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
|
