Re: Captions/BTTV (Bug maybe?) | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Cyrus Adkisson wrote:
Things seem fine with an Aopen nforce2 board I'm currently testing. I think that narrows the problem down to recent MSI nforce2 boards and kernels around 2.6.9 and greater. If anyone else out there has a video capture card and an MSI board, please reply to this thread with your experience getting captions with ntsc-cc.Cyrus Adkisson wrote:
It's not the motherboard. I just put a new one in... same symptoms. The new one was another MSI nforce2 board. I definitely think this could be a bug. My kernel version is 2.6.11-1.14_FC3.David Liontooth wrote:
ntsc-cc has a -d option for doing, for instance "ntsc-cc -cp -d /dev/vbi0"Cyrus Adkisson wrote:
So, I think this closed captioning thing is different from case to case. Right now I'm having a situation where I get the garbled output (see below), but ONLY when using video capture cards at the same time. When they operate independently, they seem fine. Right now it's happening with two K-World BT878RF cards, but was also happening with two Winfast 2000 Deluxe cards. What in the heck does this? The picture and reception are fine. I don't get it.
Interesting -- how do you tell ntsc-cc which card to capture from?
Continuing with this thread, I still haven't fully solved the caption garbling issue. It's really frustrating. Right now I have a computer (AMD 2500, MSI K7N2 -- have tried several MSI boards in this nforce2 family --, kingston hyper X ram 512GB, maxtor 250GB hd, FC3 2.6.11 kernel) with 4 Kworld video cards inside. I was able to configure them all correctly and record 4 shows simultaneously with them. The reception and picture looked fine on all 4 recordings. I also captured the closed captioning during each recording and the info pulled from /dev/vbi1, vbi2 and vbi3 were all fine.
As for vbi0, the captions were fine for a few minutes... then suddenly became garbled.
TESTS AND RESULTS: (setX = vbiX, videoX, and audioX)
Test 1: (already noted) Tried capturing video and captions on all sets at the same time. RESULT: Captions on set0 (video0, audio0, and vbi0) become garbled after a few minutes.
Test 2: Tried capturing video and captions on set0 ONLY. RESULT: Captions become garbled after a few minutes.
Test 3: Tried capturing video and captions on set0 while also recording (*but not using ntsc-cc*) on sets1-3. RESULT: The captions from set0 go bad after a few minutes. The problem seems independent of whether or not ntsc-cc is running on the other devices and also independent of whether or not the other devices are in use.
Test 4: Observed captions from sets1-3 while recording video and captions on all 4 sets at once. RESULT: The captions on sets1-3 are always fine, no matter what else is going on. Only set0 has problems.
Test 5: Tried other video card brands and models. RESULT: Same results as they pertain to captions. Picture and sound vary, obviously.
Test 6: After captions go bad on set0, I thought I'd try to kill the ntsc-cc process and restart it to see if the problem cleared up. RESULT: It doesn't.
Test 7: After captions go bad on set0, I tried killing the ffmpeg process and restarting it to see if the problem cleared up. RESULT: It does, temporarily.
Test 8: Tried removing the video0 card so that video1 then becomes video0 (in the second slot, not the first). Three sets total. RESULT: The *new* video0, which was previously video1 and working fine, gives garbled captions after a few minutes. I. E. It doesn't seem to matter which slot or which card is being used... only that it is designated as set0.
Test9: Tried removing all but one video card. RESULT: More garbled captions on the only remaining set, set0.
Test 10: Tried removing both USB audio devices, the PCI audio card, and replacing the Kingston HyperX ram with a Kingston valueram (latency of 2.5 instead of 2.0). (Only one video card installed.) RESULT: More garble.
To be continued, I guess... either my motherboard is bad or something is wrong with video4linux. It can't possibly be the devices themselves.
Cyrus
Cyrus
Dave
I think I figured it out (again). Whatever program you're running while trying to capture closed captions has to be set to the correct frame rate for your capture device. I was using ffmpeg, which sets it automatically to 25 fps. All I had to do was put "-r ntsc" or "-r 29.97" in the command and it started causing ntsc-cc to behave correctly.
--
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
--
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
--
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
-- Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
|
