Re: Leadtek PVR2000 no sound | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Am So, den 20.02.2005 schrieb wduinker@xxxxxxxxx um 13:24:
> I have a Leadtek PVR2000 OEM. Getting to understand how it should work
> over the last week, i got video and mpeg streaming working, but no sound.
>
> I have used the HAUPPAGE firmware as descibed on
>
> http://ivtv.writeme.ch/tiki-index.php?page=ExtractingTheFirmware.
>
> Mplayer gives: MPEG: No audio stream found -> no sound.
>
> Does it have to do with the gpio values, as has been mentioned for other
> cards in various posts. Can I just recover them on a windows machine. I
> only have the driver from http://www.leadtek.com/. It might be also that
> getting their firmware out of the driver solves the issue. Since it is an
> OEM card I do not have any other windows (Winfast) software.
>
> I use Linux Video 2.6.11-rc4-kraxel2, which has the patch from
>
> http://dl.bytesex.org/patches/
>
> If somebody could explain to me how I know that the right card is
> detected, I would appreciate.
>
> lspci -v says
>
> 00:0a.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
> Subsystem: LeadTek Research Inc.: Unknown device 663c
^^^^^^^^^^^
Hi,
the right card is detected.
},{
.subvendor = 0x107d,
.subdevice = 0x663b,
.card = CX88_BOARD_LEADTEK_PVR2000,
},{
.subvendor = 0x107d,
.subdevice = 0x663C,
.card = CX88_BOARD_LEADTEK_PVR2000,
The cards seem not to have an analog audio out connector, opposed to
what is claimed on Leadtek's website. So you depend on getting the audio
through the mpeg encoder, based on the code Jelle Foks initially
contributed.
A latest patch seems to be here from Catalin Climov.
http://www.spinics.net/lists/vfl/msg14666.html
That one is not yet in the snapshots.
Greetings,
Hermann
--
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
|
