bttv, black | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Hi, after bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR* bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR* in dmesg I get only black frames. hardware IVC-200 kernel 2.6.5-7.108 bttv 0.9.15 Any ideas? Complete dmesg attached. Regards hw -- Dr. Klaus H. Wolf bluehands GmbH & Co.mmunication KG http://www.bluehands.de/people/hw +49 (0721) 16108 75 -- Jabber enabled Virtual Presence on the Web: http://www.lluna.de/ Open Source Future History: http://www.galactic-developments.com/
PCI: device 0000:03:07.4 has unknown header type 7f, ignoring.
PCI: device 0000:03:07.5 has unknown header type 7f, ignoring.
PCI: device 0000:03:07.6 has unknown header type 7f, ignoring.
PCI: device 0000:03:07.7 has unknown header type 7f, ignoring.
PCI: device 0000:03:08.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:09.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:0a.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:0b.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:0c.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:0d.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:0e.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:0f.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:10.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:11.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:12.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:13.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:14.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:15.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:16.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:17.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:18.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:19.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:1a.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:1b.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:1c.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:1d.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:1e.0 has unknown header type 7f, ignoring.
PCI: device 0000:03:1f.0 has unknown header type 7f, ignoring.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
PCI: Cannot allocate resource region 0 of device 0000:03:04.0
PCI: Cannot allocate resource region 0 of device 0000:03:04.1
PCI: Cannot allocate resource region 0 of device 0000:03:05.0
PCI: Cannot allocate resource region 0 of device 0000:03:05.1
PCI: Cannot allocate resource region 0 of device 0000:03:06.0
PCI: Cannot allocate resource region 0 of device 0000:03:06.1
PCI: Cannot allocate resource region 0 of device 0000:03:07.0
PCI: Cannot allocate resource region 0 of device 0000:03:07.1
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:04.0
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:04.1
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:05.0
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:05.1
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:06.0
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:06.1
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:07.0
PCI: Failed to allocate mem resource #0:1000@0 for 0000:03:07.1
vesafb: framebuffer at 0xe8000000, mapped to 0xe0809000, size 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=11
vesafb: protected mode interface info at c000:5256
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Initial HugeTLB pages allocated: 0
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
silentjpeg size 52139 bytes,<6>...found (1280x1024, 24562 bytes, v3).
Console: switching to colour frame buffer device 147x55
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
hda: Maxtor 6Y160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: GCR-8523B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hda1
Resuming from device hda1
Resume Machine: This is normal swap space
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 216k freed
reiserfs: enabling write barrier flush mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
subfs 0.9
blk: queue dfd70a00, I/O limit 4095Mb (mask 0xffffffff)
hdd: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Adding 1052216k swap on /dev/hda1. Priority:42 extents:1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 10, io base 0000eec0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.5-7.108-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0000ef00
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.5-7.108-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
Linux agpgart interface v0.100 (c) Dave Jones
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 5, io base 0000ef20
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.5-7.108-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 10, io base 0000ef40
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.5-7.108-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf8000000
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem e2bd4800
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.5-7.108-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
hw_random hardware driver 1.0.0 loaded
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
sk98lin: Network Device Driver v6.23
(C)Copyright 1999-2004 Marvell(R).
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 5
Linux video capture interface: v1.00
btcx_risc: unsupported module, tainting kernel.
v4l2_common: unsupported module, tainting kernel.
video_buf: unsupported module, tainting kernel.
bttv: unsupported module, tainting kernel.
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:04:04.0, irq: 10, latency: 64, mmio: 0xf7efe000
bttv0: detected: IVC-200 [card=102], PCI subsystem ID is 0000:a155
bttv0: using: IVC-200 [card=102,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffff0f [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 0000:04:05.0, irq: 5, latency: 64, mmio: 0xf7efc000
bttv1: detected: IVC-200 [card=102], PCI subsystem ID is 0001:a155
bttv1: using: IVC-200 [card=102,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #1 [sw] passed test.
bttv1: using tuner=-1
bttv1: i2c: checking for MSP34xx @ 0x80... not found
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (2).
bttv2: Bt878 (rev 17) at 0000:04:06.0, irq: 5, latency: 64, mmio: 0xf7efa000
bttv2: detected: IVC-200 [card=102], PCI subsystem ID is 0002:a155
bttv2: using: IVC-200 [card=102,autodetected]
bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #2 [sw] passed test.
bttv2: using tuner=-1
bttv2: i2c: checking for MSP34xx @ 0x80... not found
bttv2: i2c: checking for TDA9875 @ 0xb0... not found
bttv2: i2c: checking for TDA7432 @ 0x8a... not found
bttv2: registered device video2
bttv2: registered device vbi2
bttv2: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (3).
bttv3: Bt878 (rev 17) at 0000:04:07.0, irq: 11, latency: 64, mmio: 0xf7ef8000
bttv3: detected: IVC-200 [card=102], PCI subsystem ID is 0003:a155
bttv3: using: IVC-200 [card=102,autodetected]
bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #3 [sw] passed test.
bttv3: using tuner=-1
bttv3: i2c: checking for MSP34xx @ 0x80... not found
bttv3: i2c: checking for TDA9875 @ 0xb0... not found
bttv3: i2c: checking for TDA7432 @ 0x8a... not found
bttv3: registered device video3
bttv3: registered device vbi3
bttv3: PLL: 28636363 => 35468950 .. ok
eth0: no IPv6 routers present
bttv2: timeout: drop=0 irq=28855290/159317329, risc=1d5b601c, bits: HSYNC
bttv2: reset, reinitialize
bttv2: PLL: 28636363 => 35468950 . ok
bttv2: timeout: drop=0 irq=28855667/159318386, risc=1d5b601c, bits: VSYNC HSYNC
bttv2: reset, reinitialize
bttv2: PLL: 28636363 => 35468950 . ok
bttv2: timeout: drop=0 irq=28855852/159319032, risc=1d5b601c, bits: HSYNC
bttv2: reset, reinitialize
bttv2: PLL: 28636363 => 35468950 . ok
bttv2: timeout: drop=0 irq=28855863/159319125, risc=1d5b601c, bits: VSYNC HSYNC
bttv2: reset, reinitialize
bttv2: PLL: 28636363 => 35468950 . ok
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
bttv2: SCERR @ 1d5b6000,bits: VSYNC HSYNC FBUS PABORT SCERR*
bttv2: SCERR @ 1d5b6000,bits: FBUS SCERR*
-- Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
|
