* hermann pitton <hermann.pitton@xxxxxxxxxxxxx> [050202 19:45]: > There seems to be something messed up with the eeprom detection. > First unload all related modules and make sure only the ones from the snapshot > are present at all. Then "depmod -a" and "modprobe -v" to see you load only from > /lib/modules/uname -r/v4l2. Loading correct modules but not detecting the right eeprom. > Do you have a radio connector or not? The TCLs with radio can have Philips API. No radio connector. > Assuming the TCL 2002MI 3, eeprom #84 works as tuner=37, what seems probable, but you > can't find a way to circumvent the auto misdetection, several trails should be viable > for testing, but as the eeprom stuff doesn't look very promising maybe simplest is to > create a new card entry first for tuner testing and fix that later. Your patch does the trick: once compiled, I did: # modprobe -v cx88xx card=24 # modprobe -v cx8800 # dmesg -c cx2388x v4l2 driver version 0.0.4 loaded ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 16 (level, low) -> IRQ 16 cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx Escape [card=24,insmod option] cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 16, latency: 32, mmio: 0xeb000000 tuner: chip found at addr 0xc2 i2c-bus cx88[0] tuner: type set to 37 (LG PAL (newer TAPC series)) by cx88[0] cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88[0]/0: set_audio_standard_BTSC (status: known-good) cx88[0]/0: cx88: tvaudio thread started cx88[0]/0: AUD_STATUS: 0xfb72 [mono/no pilot] ctl=BTSC_AUTO_STEREO and now xawtv works, more or less. Colour is ok if hue is turned all the way down, and audio works ok too. I sometimes have to remove and reload the modules. Haven't yet got tvtime working. cheers, jack
Attachment:
pgp8HiLNJa7E3.pgp
Description: PGP signature
-- Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list