Re: cx88_blackbird Unknown Symbol

[seanecovel@xxxxxxxxxxx]

Jelle,

I changed mine to Y,Y and its working now.  Looks like you've made progress since my last attempt.

My card is still not recognized.  I have a Conexant chipset and the it won't auto-recognize the card setting.  What info do you need to get my card recognized by the driver?  The closest match so far was card=5.  I think I've tried up to 13 so far.  A couple settings caused seqfaults than I had to reboot.

Thanks for your hard work!

Sean


> On Mon, 06 Dec 2004 16:45:41 -0500, Sean Covel wrote:
> 
> > 
> > 
> > Jelle wrote:
> >> On Mon, 06 Dec 2004 13:00:00 -0500, Sean Covel wrote:
> >> 
> >> 
> >>>I downloaded a snapshot and built it.
> >>>
> >>>      video4linux-20041202-142354.tar.gz
> >>>
> >>>My kernel is 2.6.9-r9.  Here's the output from uname:
> >>>
> >>>      Linux gentoo 2.6.9-gentoo-r9 #3 SMP Mon Dec 6 11:55:41 EST 2004
> >>>      i686 Intel(R) Pentium(R) III CPU - S 1266MHz GenuineIntel
> >>>      GNU/Linux
> >>>
> >>>I'm trying to load the modules and get the following:
> >>>
> >>>cx88_blackbird: Unknown symbol release_firmware
> >>>
> >>>Can't seem to find anything relevant on Google.  What'd I miss?
> >> 
> >> 
> >> My guess is that your kernel does not have CONFIG_HOTPLUG and
> >> CONFIG_FW_LOADER.
> >> 
> >> 
> > I have CONFIG_HOTPLUG=y and CONFIG_FW_LOADER=m
> > 
> > Do I need to change that to y not m?
> 
> I have both with 'y', but I think it should be fine the way you have it
> too. If I read the sources/makefiles correctly, all you need to do to get
> the missing symbol is a 'modprobe firmware_class' (I guess if that works,
> I should add a request_module() or something in there to make it load
> that automatically).
> 
> Note that the blackbird part of the driver still is not 100% ready (you 
> now still need to scale& unmute the audio correctly manually for the mpeg
> stream to contain usable audio&video). It's on my todo list, when I get
> some time (sorry 'bout the slowness).
> 
> Jelle.
> 
> > 
> >> I guess we should check if enabling blackbird in the Kconfig also
> >> enables those two (for the in-kernel one).
> >> 
> >> For the snapshots, maybe it helps to add a #warning or #error to the
> >> cx88-blackbird.c
> >> 
> >> 
> > That would be good.  Save you some Emails ;-)
> > 
> > Sean
> > 
> >> Jelle.
> >> 
> >> 
> >>>Thanks,
> >>>
> >>>Sean
> 
> --
> 
> Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list

--

Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list