Re: [ANNOUNCE] VDR developer version 1.7.23

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday. 
DVB-S channels work fine. However, any attempt to select a DVB-T channel results in "channel not available".
The Syslog trace during VDR initialisation follows:

Jan 17 18:44:05 Nutrigrain vdr: [2587] video directory scanner thread started (pid=2586, tid=2587)
Jan 17 18:44:05 Nutrigrain vdr: [2588] video directory scanner thread started (pid=2586, tid=2588)
Jan 17 18:44:05 Nutrigrain vdr: [2586] reading EPG data from /home/digitalTV/video/epg.data
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'A - ATSC'
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'C - DVB-C'
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'S - DVB-S'
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'T - DVB-T'
Jan 17 18:44:05 Nutrigrain vdr: [2586] probing /dev/dvb/adapter0/frontend0
Jan 17 18:44:05 Nutrigrain vdr: [2586] new device number 1
Jan 17 18:44:05 Nutrigrain kernel: [  150.671847] dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0
Jan 17 18:44:05 Nutrigrain vdr: [2586] frontend 0/0 provides DVB-S with QPSK ("ST STV0299 DVB-S")
Jan 17 18:44:05 Nutrigrain vdr: [2591] section handler thread started (pid=2586, tid=2591)
Jan 17 18:44:05 Nutrigrain vdr: [2590] tuner on frontend 0/0 thread started (pid=2586, tid=2590)
Jan 17 18:44:05 Nutrigrain vdr: [2586] probing /dev/dvb/adapter1/frontend0
Jan 17 18:44:05 Nutrigrain vdr: [2586] new device number 2
Jan 17 18:44:06 Nutrigrain vdr: [2588] video directory scanner thread ended (pid=2586, tid=2588)
Jan 17 18:44:06 Nutrigrain vdr: [2587] video directory scanner thread ended (pid=2586, tid=2587)
Jan 17 18:44:10 Nutrigrain kernel: [  155.838763] dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0
Jan 17 18:44:10 Nutrigrain vdr: [2586] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118")
Jan 17 18:44:10 Nutrigrain vdr: [2594] tuner on frontend 1/0 thread started (pid=2586, tid=2594)
Jan 17 18:44:10 Nutrigrain vdr: [2595] section handler thread started (pid=2586, tid=2595)
Jan 17 18:44:15 Nutrigrain vdr: [2586] ERROR (dvbdevice.c,1051): /dev/dvb/adapter1/frontend1: Device or resource busy
Jan 17 18:44:15 Nutrigrain vdr: [2586] found 2 DVB devices

Note that there is also a DVB-S premium card in the mix which works OK.

It looks like VDR is not picking up the second frontend on the hybrid card as a result of the 'Device or resource busy' result which is due to frontend 0 being open on it.

Any suggestions:

Regards,  

-----Original Message-----
From: vdr-bounces@xxxxxxxxxxx [mailto:vdr-bounces@xxxxxxxxxxx] On Behalf Of Klaus Schmidinger
Sent: Monday, 16 January 2012 2:11 AM
To: vdr@xxxxxxxxxxx
Subject:  [ANNOUNCE] VDR developer version 1.7.23

VDR developer version 1.7.23 is now available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2

A 'diff' against the previous version is available at

       ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff

MD5 checksums:

de136f7be28c4b6f1fa0e2218b4acc11  vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a  vdr-1.7.22-1.7.23.diff

WARNING:
========

This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.


The changes since version 1.7.22:

- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by
   Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many
   link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers (triggered by
   Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality()
   (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per frontend.
   This requires a DVB driver with version 5.5 or higher that can handle the
   DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery
   system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands
   at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream component
   descriptions with blanks (thanks to Torsten Lang for reporting a problem with
   EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj
   Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders.  This requires a DVB driver
   with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks
   to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken
   TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are events
   that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with UTF-8 (suggested
   by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice (suggested by
   Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery systems (DVB-S2
   and DVB-T2) are no longer written into channels.conf for "first generation"
   delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy translation
   mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to switch between
   showing the total length or the remaining time of the recording that is currently
   replayed.
- Fixed wrongfully displaying the length of a recording in the title of the replay
   progress display.
- Fixed frozen live view with device bonding in case the bonded master is used for
   live viewing (reported by Uwe Scheffler).

Have fun!

Klaus

_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr



_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr



[Index of Archives]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Big List of Linux Books]     [Fedora Users]     [Fedora Women]     [ALSA Devel]     [Linux USB]

  Powered by Linux