[Prev Page][Next Page]
- Console over usb serial gadget
- From: "pradeep.sawlani" <pradeep.sawlani@xxxxxxxxx>
- Lot of uhci_irq interrupts?
- From: "Rami Nieminen" <rami_nieminen@xxxxxxxxxxx>
- Device not detected
- From: Claudio Girlanda <cgirlanda@xxxxxxxxxxx>
- Re: Usb audio going silent after a while
- From: Benjamin Cama <benoar@xxxxxxx>
- Re: device descriptor read/64, error -62 with CONFIG_HZ=1000
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Re: External USB Storage TEAC HD-35PUK-B
- From: Axel <ap_01@xxxxxx>
- Re: device descriptor read/64, error -62 with CONFIG_HZ=1000
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- device descriptor read/64, error -62 with CONFIG_HZ=1000
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Re: Usb Mouse stops working when dragging.
- From: Dag Hovland <dag.hovland@xxxxxxxxxxxxxx>
- Re: initrd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- initrd
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- USB Webcam works on mobo USB, doesn't on USB Hub
- From: Michael Bueker <m.bueker@xxxxxxxxx>
- Usb Mouse stops working when dragging.
- From: Dag Hovland <dag.hovland@xxxxxxxxxxxxxx>
- Re: Switching from 2.6.19 to 2.6.21-rc5: removable drive became disk partition
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Re: Switching from 2.6.19 to 2.6.21-rc5: removable drive became disk partition
- From: John Haxby <jch@xxxxxxxxxx>
- Re: Switching from 2.6.19 to 2.6.21-rc5: removable drive became disk partition
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Re: Switching from 2.6.19 to 2.6.21-rc5: removable drive became disk partition
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Re: Switching from 2.6.19 to 2.6.21-rc5: removable drive became disk partition
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Switching from 2.6.19 to 2.6.21-rc5: removable drive became disk partition
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- usb pcmcia card toooooo slow
- From: Alexander von Zastrow <alex.zastrow@xxxxxx>
- Re: g_serial and windows vista
- From: Andre Haupt <haupt.andre@xxxxxx>
- Re: g_serial and windows vista
- From: Andre Haupt <haupt.andre@xxxxxx>
- Earthmate USB GPS Users (LT-20 or the earlier variant)
- From: Marr <marr99@xxxxxxxxxxxxxx>
- Re: Atmel AT43USB326-based device: too many ports
- From: "Casey Ballentine" <casey.ballentine@xxxxxxxxx>
- Re: Atmel AT43USB326-based device: too many ports
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: g_serial and windows vista
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problems with usb mouses
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- g_serial and windows vista
- From: Andre Haupt <haupt.andre@xxxxxx>
- Problems with usb mouses
- From: Fernando Marcelo Morgenstern <fernando@xxxxxxxxxxxxxxxxxx>
- Re: Atmel AT43USB326-based device: too many ports
- From: "Casey Ballentine" <casey.ballentine@xxxxxxxxx>
- Re: Atmel AT43USB326-based device: too many ports
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Atmel AT43USB326-based device: too many ports
- From: "Casey Ballentine" <casey.ballentine@xxxxxxxxx>
- ov511.c: Can't determine sensor slave IDs
- From: Olaf Petzold <olaf-petzold@xxxxxx>
- Re: usb/wlan
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- usb/wlan
- From: Oliver Block <lists@xxxxxxxxxxxxxxx>
- OvCamDriver OV511 with kernel > 2.6.16 not compiling
- From: Stefan Agethen <stagethen@xxxxxxxxxxxxxxxxxxx>
- Twiddler2 on PS3?
- From: John Connett <jrc@xxxxxxxxxxxxxxxxxx>
- Re: Boot from USB hard drive problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Boot from USB hard drive problem
- From: "Serguei I. Ivantsov" <manowar@xxxxxxxxxxxxxxxx>
- Re: USB remote control
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- cdc-acm driver for HSF USB V.92 Data/Fax Modem
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- looking for testers for whiteheat driver
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- USB remote control
- From: Roger Dahl <rogerdahl@xxxxxxxxxxx>
- Re: maximum number of usb drives
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: removable USB hard drive not detected by KDE-3.5.6
- From: James Lockie <bjlockie@xxxxxxxxx>
- Re: Further to: Acer Aspire 9300
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: removable USB hard drive not detected by KDE-3.5.6
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Further to: Acer Aspire 9300
- From: Isaacs <redpine@xxxxxxxxxxxx>
- Re: removable USB hard drive not detected by KDE-3.5.6
- From: Claas Langbehn <claas@xxxxxxxxxx>
- removable USB hard drive not detected by KDE-3.5.6
- From: James Lockie <bjlockie@xxxxxxxxx>
- OvCamDriver OV511 with kernel > 2.6.16 not compiling
- From: Stefan Agethen <stagethen@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Bill Davidsen <davidsen@xxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: External USB Storage TEAC HD-35PUK-B
- From: Axel <ap_01@xxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Neil Brown <neilb@xxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array; still no joy in Mudville.
- From: Bill Davidsen <davidsen@xxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array; still no joy in Mudville.
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array; still no joy in Mudville.
- From: Bill Davidsen <davidsen@xxxxxxx>
- Re: Acer Aspire 9300 notebook
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: External USB Storage TEAC HD-35PUK-B
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Acer Aspire 9300 notebook
- From: Isaacs <redpine@xxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: External USB Storage TEAC HD-35PUK-B
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: External USB Storage TEAC HD-35PUK-B
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- External USB Storage TEAC HD-35PUK-B
- From: Axel Pöschmann <ap_01@xxxxxx>
- Re: Failed reads from RAID-0 array; still no joy in Mudville.
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array; still no joy in Mudville.
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: "Michael Schwarz" <mschwarz@xxxxxxxxxxxxx>
- Re: Failed reads from RAID-0 array (from newbie who has read the FAQ)
- From: Neil Brown <neilb@xxxxxxx>
- Re: g_file_storage gadget not working with Vista
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Claas Langbehn <claas@xxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Claas Langbehn <claas@xxxxxxxxxx>
- Re: g_file_storage gadget not working with Vista
- From: rockwell618@xxxxxxxxx
- Re: g_file_storage gadget not working with Vista
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- g_file_storage gadget not working with Vista
- From: rockwell618@xxxxxxxxx
- Re: problem with EHCI controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with EHCI controller
- From: "Lei Sun" <lei_sun@xxxxxxxxxxx>
- Re: problem with EHCI controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with EHCI controller
- From: "Lei Sun" <lei_sun@xxxxxxxxxxx>
- Re: problem with EHCI controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with EHCI controller
- From: "Lei Sun" <lei_sun@xxxxxxxxxxx>
- Re: problem with EHCI controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with EHCI controller
- From: "Lei Sun" <lei_sun@xxxxxxxxxxx>
- Re: problem with EHCI controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with EHCI controller
- From: "Lei Sun" <lei_sun@xxxxxxxxxxx>
- Re: Atmel AT43USB326-based device: too many ports
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Atmel AT43USB326-based device: too many ports
- From: "Casey Ballentine" <casey.ballentine@xxxxxxxxx>
- Re: problem with EHCI controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- problem with EHCI controller
- From: "Lei Sun" <lei_sun@xxxxxxxxxxx>
- looking for testers of mos7840 driver
- From: Oliver Neukum <oneukum@xxxxxxx>
- Q: UBOX from Lantronix
- From: Uwe Klein <uwe-klein@xxxxxxxx>
- Freescale MPC8343 EHCI USB over-current behaviour
- From: "Engelmayer Christian" <Christian.Engelmayer@xxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: Mounting acomdata's 350GB usb drive
- From: Darin McBride <dmcbride@xxxxxxxxxxxx>
- Mounting acomdata's 350GB usb drive
- From: Darin McBride <dmcbride@xxxxxxxxxxxx>
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: "Gordon McLellan" <gordonthree@xxxxxxxxx>
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: Ingo Rohloff <lundril@xxxxxx>
- users of mos7720 driver
- From: Oliver Neukum <oneukum@xxxxxxx>
- USB2.0 specifications time constrain inquiry
- From: "rania_ah" <rania_ah@xxxxxxxxxxxxxxxxxxxxx>
- HIDDEV
- From: "Ribamar Santarosa de Sousa" <ribamar.santarosa@xxxxxxxxx>
- Re: g_file_storage speed issue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: g_file_storage speed issue
- Re: g_file_storage speed issue
- Re: g_file_storage speed issue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- weird card reader
- From: James Lockie <bjlockie@xxxxxxxxx>
- Re: g_file_storage speed issue
- Re: g_file_storage speed issue
- Re: g_file_storage speed issue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- g_file_storage speed issue
- HIDDEV
- From: "Ribamar Santarosa de Sousa" <ribamar.santarosa@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- EHCI reports message "lost IAA"
- From: Peer Griebel <peer.griebel@xxxxxx>
- Re: can not modprobe g_serial
- From: Andre Haupt <haupt.andre@xxxxxx>
- can not modprobe g_serial
- From: Andre Haupt <haupt.andre@xxxxxx>
- Re: Turn Off USB Power
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Multimedia keys don't work on keyb. plugged with PS/2-USB adapter
- From: Vojtěch Horký <vojta.horky@xxxxxxxxx>
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- ibmcam under 2.6.20.1
- From: "Gordon McLellan" <gordonthree@xxxxxxxxx>
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: michael.mauch@xxxxxx (Michael Mauch)
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Increasing Hub Power to charge a mobile phone battery ?
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Increasing Hub Power to charge a mobile phone battery ?
- From: Ingo Rohloff <lundril@xxxxxx>
- 2.6.20: middle mouse button disappeared
- From: Bernd Schubert <bernd-schubert@xxxxxx>
- DViCO FusionHDTV DVB-T Dual Usb quirk
- From: Chris <nospam@xxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- status of OV518 drivers
- From: markus reichelt <ml@xxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- kernel floods console with "connect-debounce failed"
- From: Cristian Mammoli <sengo@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Gordon Messmer <yinyang@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: CD/DVD ROM eject issue
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: CD/DVD ROM eject issue
- From: William Moon <moon@xxxxxxx>
- reset low speed USB device using uhci_hcd
- From: Gordon Messmer <gmessmer@xxxxxxxxxxxxxxxx>
- Re: CD/DVD ROM eject issue
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: CD/DVD ROM eject issue
- From: William Moon <moon@xxxxxxx>
- Turn Off USB Power
- From: "Andy Meany" <andymeany@xxxxxxxxxxx>
- Re: CD/DVD ROM eject issue
- From: "Theodoros V. Kalamatianos" <nyb@xxxxxxxxxxxxxxxxxxxxx>
- CD/DVD ROM eject issue
- From: William Moon <moon@xxxxxxx>
- Re: Hotplug of mutiple similar devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Hotplug of mutiple similar devices
- From: Diego Zuccato <diego@xxxxxxxxxxxxxxxxxxxx>
- Re: Strange USB problems.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Oopss, Question about return value of usb_start_wait_urb to usb_internal_control_msg
- From: Frederic Rodrigo <f.rodrigo@xxxxxxx>
- usb networking ipaq <-> 6.8.18.-3 doesn't connect
- From: eva sjuve <eva@xxxxxxxxxx>
- Question about return value of usb_start_wait_urb to usb_internal_control_msg
- From: Frederic Rodrigo <f.rodrigo@xxxxxxx>
- Re: Hotplug of mutiple similar devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Hotplug of mutiple similar devices
- From: Diego Zuccato <diego@xxxxxxxxxxxxxxxxxxxx>
- Re: can't get USB-serial console to work properly (or is it normal)?
- From: Greg KH <greg@xxxxxxxxx>
- Re: usb reset
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb reset
- From: sigint <lnx_usb@xxxxxxxxx>
- Re: Hotplug of mutiple similar devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb reset
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Hotplug of mutiple similar devices
- From: Diego Zuccato <diego@xxxxxxxxxxxxxxxxxxxx>
- Re: usb reset
- From: sigint <lnx_usb@xxxxxxxxx>
- Re: External IDE-USB enclosure with PL-3507 (Profilic) has problem with CD/DVD copy using Benq DW 1650
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: External IDE-USB enclosure with PL-3507 (Profilic) has problem with CD/DVD copy using Benq DW 1650
- From: Artur <wroblew@xxxxxxxxx>
- Re: Linux is unable to communicating with some Cypress Adapters
- From: "Robert Wlaschin" <robertw@xxxxxxxxxxxxxx>
- External IDE-USB enclosure with PL-3507 (Profilic) has problem with CD/DVD copy using Benq DW 1650 - continued
- From: Artur <wroblew@xxxxxxxxx>
- Re: External IDE-USB enclosure with PL-3507 (Profilic) has problem with CD/DVD copy using Benq DW 1650
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- External IDE-USB enclosure with PL-3507 (Profilic) has problem with CD/DVD copy using Benq DW 1650
- From: Artur <wroblew@xxxxxxxxx>
- can't get USB-serial console to work properly (or is it normal)?
- From: Tomasz Chmielewski <mangoo@xxxxxxxx>
- Re: PDA is not recognized by USB system, but others are
- From: Steffen Kaiser <skusb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- tcgetattr: Inappropriate ioctl for device (line 917)
- From: Ken <ken@xxxxxxxxx>
- Re: usb on initrd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb on initrd
- From: "Robert Wlaschin" <robertw@xxxxxxxxxxxxxx>
- Re: PDA is not recognized by USB system, but others are
- From: Patrick J Kobly <patrick@xxxxxxxxx>
- Re: PDA is not recognized by USB system, but others are
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb on initrd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- PDA is not recognized by USB system, but others are
- From: Steffen Kaiser <skusb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: usb on initrd
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: usb on initrd
- From: lupe@xxxxxxxxxxxxxxxxx (Lupe Christoph)
- usb on initrd
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: 2.6.20 kernel hang with USB drive and vfat doing ftruncate
- From: Robert Hancock <hancockr@xxxxxxx>
- Re: 2.6.20 USB issue(?) [disabled by hub(EMI?)]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: H4 Zoom audio recorder USB2.0 problem "sd_mod: can't be loaded"
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 2.6.20 USB issue(?) [disabled by hub(EMI?)]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
- H4 Zoom audio recorder USB2.0 problem "sd_mod: can't be loaded"
- From: Kristofer Bergstrom <kris@xxxxxxxxxxxxxx>
- Re: ISP1761 & Linux 2.6.14 - can't find /proc/scsi/usb-storage/
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ISP1761 & Linux 2.6.14 - can't find /proc/scsi/usb-storage/
- From: Michael Cook <michaelcook_mjc@xxxxxxxxx>
- Re: Gadget - File storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Gadget - File storage
- From: "Parirajan M" <parirajan.m@xxxxxxxxx>
- Re: usb reset
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Microcom ISDN USB Travel/C
- From: "Charl van Niekerk" <charlvn@xxxxxxxxxxxx>
- Linux is unable to communicating with some Cypress Adapters
- From: "Robert Wlaschin" <robertw@xxxxxxxxxxxxxx>
- Linux is unable to communicating with some Cypress Adapters
- From: "Robert Wlaschin" <robertw@xxxxxxxxxxxxxx>
- Linux 2.4.18 USB OHCI driver, SCSI, and USB memory stick device timeout
- From: "DL HU" <dlhusb@xxxxxxxxxxx>
- Problem with USB HID keyboard
- From: Marco Sinhoreli <marco@xxxxxxxxxxxxxx>
- usb reset
- From: Shane Henthorne <henthors@xxxxxxxxxxxx>
- Re: Reverse Engineering USB Protocol
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [linux-usb-devel] USB host controller testing in linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: Reverse Engineering USB Protocol
- Reverse Engineering USB Protocol
- From: "Radomir Zugic" <radomirz@xxxxxxxxx>
- Re: Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: Raphael Charwot <raphael.charwot@xxxxxxx>
- Re: Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: Raphael Charwot <raphael.charwot@xxxxxxx>
- Re: flash drive
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: [linux-usb-devel] USB host controller testing in linux
- From: "Deepak Katagade" <deepak.ckm@xxxxxxxxx>
- Re: USB mouse not working
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mouse not working
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [linux-usb-devel] USB host controller testing in linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Logitech wireless keyboard repeating keystrokes and mouse randomly disapearing
- From: Conny Holtegaard <conholster@xxxxxxxxx>
- Re: Logitech wireless keyboard repeating keystrokes and mouse randomly disapearing
- From: Robert Marquardt <marquardt@xxxxxxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Logitech wireless keyboard repeating keystrokes and mouse randomly disapearing
- From: "con hol" <conholster@xxxxxxxxx>
- Re: USB host controller testing in linux
- From: "Deepak Katagade" <deepak.ckm@xxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB mouse not working
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: USB host controller testing in linux
- From: Greg KH <greg@xxxxxxxxx>
- Re: flash drive
- From: Z F <mail4me9999@xxxxxxxxx>
- USB host controller testing in linux
- From: "Deepak Katagade" <deepak.ckm@xxxxxxxxx>
- Re: USB mouse not working
- From: Michael Cook <michaelcook_mjc@xxxxxxxxx>
- USB mouse not working
- From: "Thomas Folz-Donahue" <eigenlambda@xxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Bluetooth dongle from "Logitech diNovo Laser" desktop only runs as USB-Hub
- From: Raphael Charwot <raphael.charwot@xxxxxxx>
- ISP1761 & Linux 2.6.14 - internal hub halts on first QTD of first URB.
- From: Michael Cook <michaelcook_mjc@xxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: ehci_hcd with slower FSB than normal
- From: joscej@xxxxxxxxxxxx
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ehci_hcd with slower FSB than normal
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ehci_hcd with slower FSB than normal
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: ehci_hcd with slower FSB than normal
- From: joscej@xxxxxxxxxxxx
- Re: ehci_hcd with slower FSB than normal
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: ehci_hcd with slower FSB than normal
- From: Robert Marquardt <marquardt@xxxxxxxxxxxxx>
- Re: ehci_hcd with slower FSB than normal
- From: joscej@xxxxxxxxxxxx
- Re: ehci_hcd with slower FSB than normal
- From: Robert Marquardt <marquardt@xxxxxxxxxxxxx>
- Re: Matching usb port with device file
- From: Oleg Verych <olecom@xxxxxxxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Matching usb port with device file
- From: Greg KH <greg@xxxxxxxxx>
- Re: Matching usb port with device file
- From: <edw_wq@xxxxxxxxxxx>
- Re: Matching usb port with device file
- From: Greg KH <greg@xxxxxxxxx>
- Re: flash drive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Matching usb port with device file
- From: <edw_wq@xxxxxxxxxxx>
- ehci_hcd with slower FSB than normal
- From: joscej@xxxxxxxxxxxx
- Re: USB joystick not detected: Guillemot Jet Leader
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB joystick not detected: Guillemot Jet Leader
- From: "Maarten Inklaar" <meertn@xxxxxxxxx>
- Re: 2.6.20-rc7 USB issue(?) [disabled by hub(EMI?)]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] fix rtl8150
- From: Al Viro <viro@xxxxxxxxxxxxxxxx>
- 2.6.20-rc7 USB issue(?) [disabled by hub(EMI?)]
- From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
- Oops with 2.6.19.2
- From: Antoine Martin <antoine@xxxxxxxxxxxxx>
- flash drive
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Re: "unplugging" USB device by software?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: "unplugging" USB device by software?
- From: Joe Wells <sllewbj@xxxxxxxxxxxxxxxx>
- Re: "unplugging" USB device by software?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: "unplugging" USB device by software?
- From: Joe Wells <sllewbj@xxxxxxxxxxxxxxxx>
- Re: "unplugging" USB device by software?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: protocol error
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Connecting Motorola A780: kernel: zaurus: disagrees about version of symbol usbnet_get_endpoints
- From: Marcel Ruff <mr@xxxxxxxxxxxxxxx>
- "unplugging" USB device by software?
- From: Joe Wells <sllewbj@xxxxxxxxxxxxxxxx>
- protocol error
- From: "Radomir Zugic" <radomirz@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: usb-serial and flow control question
- From: Joris van Rantwijk <jorispubl@xxxxxxxxx>
- Re: usb-serial and flow control question
- From: Greg KH <greg@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Canon A530 bizarre behavior
- From: Yan Seiner <yan@xxxxxxxxxx>
- Canon A530 bizarre behavior
- From: Yan Seiner <yan@xxxxxxxxxx>
- usb-serial and flow control question
- From: Joris van Rantwijk <jorispubl@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Matthijs van Aalten <linux-usb@xxxxxxxxxxxxx>
- Re: Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- kernel panic when inserting usb isdn modem
- From: Christian Weiske <cweiske@xxxxxxxxxx>
- Re: USB2.0 stalling/freezing - any ideas? should I fill a bug?
- From: kike <16@xxxxxxxxx>
- ASUS M2V USB will cause 100% CPU load
- From: "Rami Nieminen" <rami_nieminen@xxxxxxxxxxx>
- Re: Digital Pens and Linux USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Fwd: Digital Pens and Linux USB
- From: "Radomir Zugic" <radomirz@xxxxxxxxx>
- Re: Digital Pens and Linux USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Linux 2.6 and Philips USB ISP1161A and ISP1760 Host USB Controller Support
- From: "Arvind Agrawal" <arvind@xxxxxxxxxxxxxxxx>
- Re: [U-Boot-Users] Linux porting/ error code for ISP 1561/ usb integration
- From: Wolfgang Denk <wd@xxxxxxx>
- Digital Pens and Linux USB
- From: rzugic@xxxxxxxxxxxxxxxxx
- Help with /dev/ttyUSB* & Keyspan 19HS serial-USB adaptor
- From: pnberry@xxxxxxxxxxxxxx
- Re: (no subject)
- From: Greg KH <greg@xxxxxxxxx>
- Re: Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Matthijs van Aalten <linux-usb@xxxxxxxxxxxxx>
- Re: Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- (no subject)
- From: Radha Mohan <radhamohan_ch@xxxxxxxxx>
- Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Matthijs van Aalten <linux-usb@xxxxxxxxxxxxx>
- Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Matthijs van Aalten <vanaalten@xxxxxxxxxxx>
- Via EPIA CN10000 won't do full-speed - ehci_hcd problem
- From: Matthijs van Aalten <vanaalten@xxxxxxxxxxx>
- USB wireless dongle
- From: "pintu mehta" <pintumehta@xxxxxxxxx>
- (no subject)
- From: pnberry@xxxxxxxxxxxxxx
- Re: Iogear kvm switch usb failure
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB2.0 stalling/freezing - any ideas? should I fill a bug?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB2.0 stalling/freezing - any ideas? should I fill a bug?
- From: kike <16@xxxxxxxxx>
- Wireless USB adapters for linux
- From: "pintu mehta" <pintumehta@xxxxxxxxx>
- Nokia N71: same error as N80
- From: Andres Meyer <andres.meyer@xxxxxxxxxxxx>
- [PATCH 2.6.20-rc5 01/01] usb: Sierra Wireless auto set D0
- From: Kevin Lloyd <klloyd@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2.6.20-rc3 01/01] usb: Sierra Wireless auto set D0
- From: Greg KH <greg@xxxxxxxxx>
- Re: problems posting
- From: Steve Bangert <sbangert@xxxxxxxxxxx>
- problems posting
- From: kike <16@xxxxxxxxx>
- [PATCH 2.6.20-rc3 01/01] usb: Sierra Wireless auto set D0
- From: Kevin Lloyd <klloyd@xxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: WD Passport USB - works on 2.6.15 but not 2.6.18.. ?
- From: "nate" <usb@xxxxxxxxxxxxxxxx>
- WD Passport USB - works on 2.6.15 but not 2.6.18 .. ?
- From: "nate" <usb@xxxxxxxxxxxxxxxx>
- No RX/TX with Linksys USB200M Rev. 2, chipset ASIX 88772, USB DEV. ID 13b1:0018
- From: Dennis Schafroth <dennis@xxxxxxxxxxxx>
- Re: fedora core 6 and PL2303 Serial Port
- From: Greg KH <greg@xxxxxxxxx>
- Re: Disable onboard USB PCI device?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Disable onboard USB PCI device?
- From: "Mark Watson" <scrameta@xxxxxxxxxxxxxx>
- Re: PCI 2.1 to USB port card, kernel 2.4
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- PCI 2.1 to USB port card, kernel 2.4
- From: "Luiz Netto" <luiznetto@xxxxxxxxxxxxx>
- Re: USB memory stick and flashcard mount failure
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- USB memory stick and flashcard mount failure
- From: Herb Howe <herbhowe@xxxxxxxxx>
- Re: USB modem spontaneously disconnects on use.
- From: Justin Schoeman <justin@xxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Usb audio going silent after a while
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Usb audio going silent after a while
- From: Sjoerd Simons <sjoerd@xxxxxxxxxxxxxxx>
- Iogear kvm switch usb failure
- From: Bob Hartung <rwhart@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: USB modem spontaneously disconnects on use.
- From: Justin Schoeman <justin@xxxxxxxxxxxxxxx>
- Keyspan USA-49WLC driver broken in 2.6.18, 4.6.19, and 2.6.20
- From: Robert Hirsh <rkhirsh@xxxxxxxxx>
- Re: Problems when connecting to Nokia 6280 with CA-53 USB cable
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: turnering off USB devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- fedora core 6 and PL2303 Serial Port
- From: "Gregory Machin" <gregory.machin@xxxxxxxxx>
- turnering off USB devices
- From: Mattias Rönnblom <hofors@xxxxxxxxxxxxxx>
- snd_usb_audio is loaded but my usb synth refuse to work.
- From: europeen <skogkatt@xxxxxxxxx>
- Re: USB device enumeration question
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: boot failure with usb kvm switch - FC6
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Disable onboard USB PCI device?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- boot failure with usb kvm switch - FC6
- From: Bob Hartung <rwhart@xxxxxxxxx>
- Re: Disable onboard USB PCI device?
- From: David Relson <relson@xxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Disable onboard USB PCI device?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Disable onboard USB PCI device?
- From: "Mark Watson" <scrameta@xxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Usb audio going silent after a while
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB device enumeration question
- From: Greg KH <greg@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: 60 Seconds to Reset after EREMOTEIO
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Device on ARM OHCI doesn't work (errors -62 and -71)
- From: Milan Plzik <milan.plzik@xxxxxxxxx>
- Re: 60 Seconds to Reset after EREMOTEIO
- From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Problems when connecting to Nokia 6280 with CA-53 USB cable
- From: "Xiaofan Chen" <xiaofanc@xxxxxxxxx>
- Re: Device on ARM OHCI doesn't work (errors -62 and -71)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Device on ARM OHCI doesn't work (errors -62 and -71)
- From: Milan Plzik <milan.plzik@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 60 Seconds to Reset after EREMOTEIO
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problems when connecting to Nokia 6280 with CA-53 USB cable
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 60 Seconds to Reset after EREMOTEIO
- From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Problems when connecting to Nokia 6280 with CA-53 USB cable
- From: "Xiaofan Chen" <xiaofanc@xxxxxxxxx>
- Usb audio going silent after a while
- From: sjoerd@xxxxxxxxxxxxxxx (Sjoerd Simons)
- Re: USB/Floppy controller source?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- tester of WMC Device Management driver wanted
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: USB/Floppy controller source?
- From: Minuk Choi <Choi.Minuk@xxxxxxxxxxx>
- Re: USB device enumeration question
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB device enumeration question
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: USB device enumeration question
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB/Floppy controller source?
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB/Floppy controller source?
- From: Joe Pfeiffer <pfeiffer@xxxxxxxxxxx>
- USB/Floppy controller source?
- From: Minuk Choi <Choi.Minuk@xxxxxxxxxxx>
- Re: USB device enumeration question
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: USB device enumeration question
- From: Steve Bangert <sbangert@xxxxxxxxxxx>
- USB device enumeration question
- From: Ron Gage <ron@xxxxxxxxxxx>
- Device on ARM OHCI doesn't work (errors -62 and -71)
- From: Milan Plzik <milan.plzik@xxxxxxxxx>
- Re: which PCI USB cards work with Linux?
- From: David Relson <relson@xxxxxxxxxxxxxxxxx>
- Re: which PCI USB cards work with Linux?
- From: Igor Yakushin <igory_1999@xxxxxxxxx>
- Re: which PCI USB cards work with Linux?
- From: David Relson <relson@xxxxxxxxxxxxxxxxx>
- Re: which PCI USB cards work with Linux?
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- which PCI USB cards work with Linux?
- From: Igor Yakushin <igory_1999@xxxxxxxxx>
- [PATCH] usb-hid: Logitech diNovo Edge touchpad
- From: skylark@xxxxxxxxxxxxxxxxxx
- Re: reset low speed USB device using uhci_hcd
- From: "antongiulio05@xxxxxxxxx" <antongiulio05@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: "antongiulio05@xxxxxxxxx" <antongiulio05@xxxxxxxxx>
- Re: reset low speed USB device using uhci_hcd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- reset low speed USB device using uhci_hcd
- From: "antongiulio05@xxxxxxxxx" <antongiulio05@xxxxxxxxx>
- Re: 2.6.20-rc2 vs. external SoundBlaster USB: connect/disconnect loop
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 2.6.20-rc2 vs. external SoundBlaster USB: connect/disconnect loop
- Re: Fwd: sony dcr-sr100 usb2 problems
- From: Z F <mail4me9999@xxxxxxxxx>
- Hangup: usb-storage/ehci/cardbus, 2.6.19.1
- From: Eduard Bloch <edi@xxxxxx>
- Re: Blackberry Charging under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Blackberry Charging under Linux
- From: John Van Ostrand <john@xxxxxxxxxxxx>
- Re: hamlet zelig usb-scsi drive sector 0 read error
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Fwd: sony dcr-sr100 usb2 problems
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: hamlet zelig usb-scsi drive sector 0 read error
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- hamlet zelig usb-scsi drive sector 0 read error
- From: Francesco Foresti <frafore@xxxxxxxxxx>
- Re: helo wha tto do to detect pendrive on redhat 9 o.s.
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: Stable API for USB programming
- From: Greg KH <greg@xxxxxxxxx>
- helo wha tto do to detect pendrive on redhat 9 o.s.
- From: "amit pansuria" <pansuriya.amit@xxxxxxxxx>
- Re: EHCI usb host debug
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: EHCI usb host debug
- From: "JackRain" <hejieming@xxxxxxxxx>
- g_serial with acm
- From: "Jacob Smit" <jacob.smit@xxxxxxxxxxxx>
- rfcomm, listening on (serial) port
- From: Bas Schulte <basschulte@xxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Linux kernel incessantly resets USB keyboard. [solved]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Linux kernel incessantly resets USB keyboard. [solved]
- From: Ethan Romander <eromander@xxxxxxxxxxx>
- Re: usb hard disk
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: EHCI usb host debug
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB modem spontaneously disconnects on use.
- From: Justin Schoeman <justin@xxxxxxxxxxxxxxx>
- Newbie on USB
- From: Peter Nyamukusa <petern@xxxxxxxxxxxxxxxxxx>
- EHCI usb host debug
- From: "JackRain" <hejieming@xxxxxxxxx>
- Re: usb hard disk
- From: "Stephen J. Gowdy" <gowdy@xxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- usb hard disk
- From: km <km@xxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Linux kernel incessantly resets USB keyboard.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Linux kernel incessantly resets USB keyboard.
- From: Ethan Romander <eromander@xxxxxxxxxxx>
- Stable API for USB programming
- From: "Phil Endecott" <spam_from_usb_users@xxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Memory stick not working under Linux
- From: Vaclav Barta <vbar@xxxxxxx>
- Re: Memory stick not working under Linux
- From: David Relson <relson@xxxxxxxxxxxxxxxxx>
- USB/IP on the Linksys NSLU2