[Prev Page][Next Page]
- trying to get Altec Lansing device (Functional Unit) into usbquirks
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: problems with usb/serial converter
- From: Greg KH <greg@xxxxxxxxx>
- Re: Mapping a usbfs device to the corresponding sysfs device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Mapping a usbfs device to the corresponding sysfs device.
- From: Greg KH <greg@xxxxxxxxx>
- Wireless RF USB Mouse
- From: Bruno Ribeiro <brunormr@xxxxxxxxxxxx>
- USB generally works, but no gamepads
- From: Joel Wiesmann <joel.wiesmann@xxxxxxxxxxx>
- Industrial USB Sensors
- From: Brian Stumm <bstumm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: USB keyboard not generating input events.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB keyboard not generating input events.
- From: Chris Ball <cjb@xxxxxxxxxx>
- problems with usb/serial converter
- From: Mark Matties <mmatties@xxxxxxxxxxxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: "Dave Higton" <DAVE.HIGTON@xxxxxxxx>
- Re: USB keyboard not generating input events.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB keyboard not generating input events.
- From: Chris Ball <cjb@xxxxxxxxxx>
- Re: [REGRESSION] 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [REGRESSION] 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
- From: Mark Hindley <mark@xxxxxxxxxxxxxx>
- Re: Experimental driver for USB dongle 07d0:4100 (Kingsun/Dazzle) - looking for testers
- From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
- Re: [REGRESSION] 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Mapping a usbfs device to the corresponding sysfs device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Experimental driver for USB dongle 07d0:4100 (Kingsun/Dazzle) - looking for testers
- From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- cable modem rx errors after usbnet support for jumbo frames
- From: Avi Rozen <avi.rozen@xxxxxxxxxxxx>
- [REGRESSION] 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
- From: Mark Hindley <mark@xxxxxxxxxxxxxx>
- Re: Mapping a usbfs device to the corresponding sysfs device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Mapping a usbfs device to the corresponding sysfs device.
- From: Greg KH <greg@xxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: "Olaf G." <oglage@xxxxxxxxxxx>
- How to use USB gadget
- From: Jyothi Gudavalli <sujy@xxxxxxx>
- Re: device descriptor read/8, error -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: "Olaf G." <oglage@xxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- Re: USB keyboard not generating input events.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB keyboard not generating input events.
- From: Chris Ball <cjb@xxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Greg KH <greg@xxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: device descriptor read/8, error -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- device descriptor read/8, error -110
- From: "Olaf G." <oglage@xxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- Re: Driver for USB IrDA dongle Kingsun KS-959?
- From: Alex Villacís Lasso <avillaci@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Mapping a usbfs device to the corresponding sysfs device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- Re: Help with talking to a device
- From: "David Hooker" <dhooker@xxxxxxxxx>
- Re: Help with talking to a device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Help with talking to a device
- From: "David Hooker" <dhooker@xxxxxxxxx>
- Re: Help with talking to a device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Linux usb application for multiple endpoints
- From: "Srinivas Rao" <srinivas.chilaka@xxxxxxxxxxx>
- Re: Help with talking to a device
- From: "David Hooker" <dhooker@xxxxxxxxx>
- Re: Help with talking to a device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Help with talking to a device
- From: "David Hooker" <dhooker@xxxxxxxxx>
- Re: Help with talking to a device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Help with talking to a device
- From: "David Hooker" <dhooker@xxxxxxxxx>
- Re: Help with talking to a device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Help with talking to a device
- From: "David Hooker" <dhooker@xxxxxxxxx>
- Re: [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [usb-storage] "transport indicates command failure" when hot-plugging a USB device
- From: Jean-Claude Repetto <jcrepetto@xxxxxxxxxx>
- [linux-usb-users@xxxxxxxxxxxxxxxxxxxxx] Linux driver for Linksys WUSB300N
- From: z l <zql@xxxxxxxxxxxxxxxx>
- Re: Driver for USB IrDA dongle Kingsun KS-959?
- From: Alex Villacís Lasso <avillaci@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: /sys/class/usb_device not found with 2.6.22.1-27.fc7
- From: Greg KH <greg@xxxxxxxxx>
- 2.4.31 cdc_ether and RNDIS
- From: "kalyan tejaswi" <kalyanatejaswi@xxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Ron Gage <ron@xxxxxxxxxxx>
- Re: Help needed - writing USB device driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- /sys/class/usb_device not found with 2.6.22.1-27.fc7
- From: Dave Mielke <dave@xxxxxxxxx>
- Help needed - writing USB device driver
- From: Ron Gage <ron@xxxxxxxxxxx>
- [PATCH][15/37] Clean up duplicate includes in drivers/usb/
- From: Jesper Juhl <jesper.juhl@xxxxxxxxx>
- Re: /dev/bus/usb/ has vanished under 2.6.22.1?
- From: ael <law_ence.dev@xxxxxxxxxxxx>
- Important
- From: "Nandini Saikia" <x0074933@xxxxxx>
- Re: /dev/bus/usb/ has vanished under 2.6.22.1?
- From: Greg KH <greg@xxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- New device: Genesys Logic Webcam
- From: Jack Malmostoso <malmostoso@xxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Akkana Peck <akkana@xxxxxxxxxxxxxx>
- [linux-usb-devel] [PATCH 70/78] USB: add picdem device to ldusb
- From: "Xiaofan Chen" <xiaofanc@xxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Akkana Peck <akkana@xxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- /dev/bus/usb/ has vanished under 2.6.22.1?
- From: ael <law_ence.dev@xxxxxxxxxxxx>
- Re: Seagate Device Timing Out -- Needs Reset.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Akkana Peck <akkana@xxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Akkana Peck <akkana@xxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Rogier Wolff <R.E.Wolff@xxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Akkana Peck <akkana@xxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- libusb and kernel 2.6.22.1
- From: ael <law_ence.dev@xxxxxxxxxxxx>
- Re: USB device not detected
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Rogier Wolff <R.E.Wolff@xxxxxxxxxxxx>
- Re: USB device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB device not detected
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxx>
- Seagate Device Timing Out -- Needs Reset.
- From: "Stephen Samuel" <darkonc@xxxxxxxxx>
- [PATCH 5/5] use mutex instead of semaphore in the FTDI ELAN driver
- From: Matthias Kaehlcke <matthias.kaehlcke@xxxxxxxxx>
- [PATCH 4/5] use mutex instead of semaphore in the Adutux driver
- From: Matthias Kaehlcke <matthias.kaehlcke@xxxxxxxxx>
- [PATCH 3/5] use mutex instead of semaphore in the ELAN U132 adapter driver
- From: Matthias Kaehlcke <matthias.kaehlcke@xxxxxxxxx>
- Re: USB device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB device not detected
- From: Haines Brown <brownh@xxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: "Dylan Taft" <d13f00l@xxxxxxxxx>
- Re: HID driver
- From: Greg KH <greg@xxxxxxxxx>
- Re: Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 'Cannot enable port 3. Maybe the USB cable is bad?' - DM-140GINK Demo / HMC-2K53A
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 'Cannot enable port 3. Maybe the USB cable is bad?' - DM-140GINK Demo / HMC-2K53A
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- HID driver
- From: Marcel Meerstetter <marmeer@xxxxxxxxx>
- Problem, irq 23: nobody cared (try booting with the "irqpoll" option)
- From: "Dylan Taft" <d13f00l@xxxxxxxxx>
- Re: USB Serial Support on embedded device
- From: Greg KH <greg@xxxxxxxxx>
- Re: 'Cannot enable port 3. Maybe the USB cable is bad?' - DM-140GINK Demo / HMC-2K53A
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- HID driver
- From: Marcel Meerstetter <marmeer@xxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Dirk Försterling <r@xxxxxxxxx>
- Re: USB Serial Support on embedded device
- From: Peter Warrick <peter.warrick@xxxxxxxxxxxxx>
- Re: USB Serial Support on embedded device
- From: Greg KH <greg@xxxxxxxxx>
- Re: Plantronics USB headset mike works in Ubuntu but not Fedora
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB Serial Support on embedded device
- From: Peter Warrick <peter.warrick@xxxxxxxxxxxxx>
- Re: USB Serial Support on embedded device
- From: Peter Warrick <peter.warrick@xxxxxxxxxxxxx>
- Re: USB Serial Support on embedded device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB Serial Support on embedded device
- From: Peter Warrick <peter.warrick@xxxxxxxxxxxxx>
- USB for AT91RM9200-EK board.
- From: "Leonid" <Leonid@xxxxxxxxx>
- Re: GSM Samsung SGH-U600 is not working with MTP mode
- From: "Leonid" <Leonid@xxxxxxxxx>
- GSM Samsung SGH-U600 is not working with MTP mode
- From: Christian KAKESA <setcode@xxxxxxxx>
- system restarts when mouse is connected to usb card
- From: Cyrus Massoumi <cyrusm@xxxxxxx>
- problem with hotplug
- From: Bill <bill3@xxxxxxxxxxxx>
- Re: nokia usb data cable - messages in log
- From: WarrenHead <warrenhead@xxxxxxxxx>
- Re: nokia usb data cable - messages in log
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- nokia usb data cable - messages in log
- From: WarrenHead <warrenhead@xxxxxxxxx>
- Re: USB problem - help needed to identify faulty hardware
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB problem - help needed to identify faulty hardware
- From: Karl Kiniger <karl.kiniger@xxxxxxxxxx>
- Re: USB problem - help needed to identify faulty hardware
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Plantronics USB headset mike works in Ubuntu but not Fedora
- From: "Iain Cheyne" <iain@xxxxxxxxxx>
- USB problem - help needed to identify faulty hardware
- From: Karl Kiniger <karl.kiniger@xxxxxxxxxx>
- Re: USB Bar code scanner timeout
- From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
- Re: USB Bar code scanner timeout
- From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
- Re: 'Cannot enable port 3. Maybe the USB cable is bad?' - DM-140GINK Demo / HMC-2K53A
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Usb audio going silent after a while
- From: Sjoerd Simons <sjoerd@xxxxxxxxxxxxxxx>
- Surely there are diagnostic steps for USB problems?!
- Re: 'Cannot enable port 3. Maybe the USB cable is bad?' - DM-140GINK Demo / HMC-2K53A
- From: Dave Walker <DaveWalker@xxxxxxxxxx>
- 'Cannot enable port 3. Maybe the USB cable is bad?' - DM-140GINK Demo / HMC-2K53A
- From: Dave Walker <DaveWalker@xxxxxxxxxx>
- Re: Asus A8N-SLI problems
- From: David <lists@xxxxxxxxx>
- Re: /proc/scsi is missing (SOLVED)
- From: Bill <bill3@xxxxxxxxxxxx>
- cypress_m8 module and Earthmate USB GPS LT-20 Troubles (2.6.20)
- From: Chris Pick <pilo1000@xxxxxxxxx>
- Re: Linux drivers for T232BL
- From: Greg KH <greg@xxxxxxxxx>
- Linux drivers for T232BL
- From: "Radovid Drobnjak" <radovid.drobnjak@xxxxxxxx>
- Re: /proc/scsi is missing
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: /proc/scsi is missing
- From: Daniël Boone <daniel.boone@xxxxxxxxx>
- Re: /proc/scsi is missing
- From: Bill <bill3@xxxxxxxxxxxx>
- Re: /proc/scsi is missing
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: /proc/scsi is missing
- From: Bill <bill3@xxxxxxxxxxxx>
- Re: /proc/scsi is missing
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- /proc/scsi is missing
- From: Bill <bill3@xxxxxxxxxxxx>
- External USB DVD Writers - HP 1040e
- From: GaryCarr <gcarr@xxxxxxxx>
- Re: usb 2.0/firewire cardbus (ALi) problems
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- usb 2.0/firewire cardbus (ALi) problems
- From: "Kevin McCoy" <km.takewithyou@xxxxxxxxx>
- Touchscreen DMC TSC-10 on USB doesn't talk to userspace
- From: Clemens Koller <clemens.koller@xxxxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Dirk Försterling <r@xxxxxxxxx>
- Help tracking down chipset manufacturer for Kingsun KS-959 USB IrDA dongle
- From: Alex Villacís Lasso <avillaci@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Greg KH <greg@xxxxxxxxx>
- Re: Asus A8N-SLI problems
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Asus A8N-SLI problems
- From: David <lists@xxxxxxxxx>
- Re: Stable identification of identical USB hardware
- From: "Kay Sievers" <kay.sievers@xxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Greg KH <greg@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Greg KH <greg@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Greg KH <greg@xxxxxxxxx>
- Re: Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- From: Mikhail Ramendik <mr@xxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Greg KH <greg@xxxxxxxxx>
- Re: Stable identification of identical USB hardware
- From: Greg KH <greg@xxxxxxxxx>
- Re: [usb-storage] Mass storage device NAK's
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] Mass storage device NAK's
- From: "Balan, Vineeth (IE10)" <Vineeth.Balan@xxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Stable identification of identical USB hardware
- From: Joerg Pommnitz <pommnitz@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alex Bligh <alex@xxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Rogier Wolff <R.E.Wolff@xxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Rogier Wolff <R.E.Wolff@xxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- Re: Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- From: Greg KH <greg@xxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- From: Mikhail Ramendik <mr@xxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- From: Greg KH <greg@xxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- From: Mikhail Ramendik <mr@xxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Huawei E220 modem tends to fail on hot connect, also sometimes in bad state at boot
- From: Mikhail Ramendik <mr@xxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 4 GB USB flash disk with FAT ok, with ext3 corrupted files
- From: Miernik <public@xxxxxxxxxxxx>
- Re: sharing a USB device among multiple hosts possible?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Test USB device interface on at91rm9200 based board.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- sharing a USB device among multiple hosts possible?
- From: Robert Schuster <theBohemian@xxxxxxx>
- Re: USB Mass Storage on at91rm9200-ek
- From: "Leonid" <Leonid@xxxxxxxxx>
- Re: USB Mass Storage on at91rm9200-ek
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Test USB device interface on at91rm9200 based board.
- From: "Leonid" <Leonid@xxxxxxxxx>
- USB Mass Storage on at91rm9200-ek
- From: "Leonid" <Leonid@xxxxxxxxx>
- USB connected IDE disk doesn't work FC 6, works FC 2
- From: Aharon Robbins <arnold@xxxxxxxxxx>
- Re: [usb-storage] Mass storage device NAK's
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] Mass storage device NAK's
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: [usb-storage] Mass storage device NAK's
- From: "Balan, Vineeth (IE10)" <Vineeth.Balan@xxxxxxxxxxxxx>
- Re: /dev/bus/usb vs /proc/bus/usb
- From: Dave Mielke <dave@xxxxxxxxx>
- /dev/bus/usb vs /proc/bus/usb
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: USB Speaker won't work along with USB keyboard.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Autosuspend problem - some explanation needed.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB Speaker won't work along with USB keyboard.
- From: Raviraj Bhat <ravi_raj_bhat@xxxxxxxxx>
- Autosuspend problem - some explanation needed.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: Usb over Ethernet
- From: Diego Zuccato <diego@xxxxxxxxxxxxxxxxxxxx>
- Re: Usb over Ethernet
- From: ellis@xxxxxxxxxxx (Rick Ellis)
- Re: Usb over Ethernet
- From: "Phil Endecott" <spam_from_usb_users@xxxxxxxxxxxx>
- Re: usbserial device speed?
- Re: Usb over Ethernet
- From: Thomas Reitmayr <thomas@xxxxxxxxxx>
- Re: usbserial device speed?
- From: Greg KH <greg@xxxxxxxxx>
- Re: Usb over Ethernet
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usbserial device speed?
- File identifier from usb_dev_handle
- From: "Guillaume Dargaud" <usb@xxxxxxxxxxxx>
- Re: usbserial device speed?
- From: Greg KH <greg@xxxxxxxxx>
- Re: Usb over Ethernet
- From: "Damjan Jovanovic" <damjan.jov@xxxxxxxxx>
- Re: usbserial device speed?
- Usb over Ethernet
- From: Diego Zuccato <diego@xxxxxxxxxxxxxxxxxxxx>
- Re: usbserial device speed?
- From: Robert Marquardt <marquardt@xxxxxxxxxxxxx>
- usbserial device speed?
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Jimbo123 <jim_1234au@xxxxxxxxxxxx>
- Re: BCM92035NMD bluetooth module?
- From: pol <linux_milano@xxxxxxxx>
- Re: BCM92035NMD bluetooth module?
- From: pol <linux_milano@xxxxxxxx>
- Re: BCM92035NMD bluetooth module? +more hardware info
- From: Paolo Massimo <paolo.pumilia@xxxxxxxxx>
- Re: BCM92035NMD bluetooth module?
- From: Robert Marquardt <marquardt@xxxxxxxxxxxxx>
- Re: BCM92035NMD bluetooth module?
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: BCM92035NMD bluetooth module?
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- BCM92035NMD bluetooth module?
- From: pol <linux_milano@xxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Jimbo123 <jim_1234au@xxxxxxxxxxxx>
- Re: Kernel 2.6.21 cannot recognize my usb hard disk at boot time
- From: Ahmed Hussien <a.hussien@xxxxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Kernel 2.6.21 cannot recognize my usb hard disk at boot time
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: "Jimbo" <jim_1234au@xxxxxxxxxxxx>
- Kernel 2.6.21 cannot recognize my usb hard disk at boot time
- From: Ahmed Hussien <a.hussien@xxxxxxxxxx>
- Re: Kernel... when ?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 66MHz PCI USB host controller
- From: "Phil Endecott" <spam_from_usb_users@xxxxxxxxxxxx>
- Kernel... when ?
- From: "Guillaume Dargaud" <usb@xxxxxxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Jimbo123 <jim_1234au@xxxxxxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Jimbo123 <jim_1234au@xxxxxxxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- ASUS M2NPV-VM with DVICO Dual Digital (USB tuner problems)
- From: Jimbo123 <jim_1234au@xxxxxxxxxxxx>
- Re: Load uchi-usb without enabling all controllers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Load uchi-usb without enabling all controllers
- From: "Olof Kindgren" <kindgren@xxxxxxxxxxxxxxxxxxx>
- Re: Cypress problem (SOLVED)
- From: "Guillaume Dargaud" <usb@xxxxxxxxxxxx>
- Re: Cypress problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- testing throuput
- From: Carl Karsten <carl@xxxxxxxxxxxxxxxxx>
- Re: Cypress problem
- From: "Guillaume Dargaud" <usb@xxxxxxxxxxxx>
- Re: Spontaneous USB subsystem shutdown
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Cypress problem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Spontaneous USB subsystem shutdown
- From: Juergen Botz <jurgen@xxxxxxxx>
- Cypress problem
- From: "Guillaume Dargaud" <usb@xxxxxxxxxxxx>
- Re: Spontaneous USB subsystem shutdown
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- g_serial and at91_udc
- From: frederic RODO <f.rodo@xxxxxxxxxxxxxxxxxxx>
- Spontaneous USB subsystem shutdown
- From: Juergen Botz <jurgen@xxxxxxxx>
- Problem with USB extender/extension cord + webcam
- From: "Wille P. Salminen" <wille@xxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Pierre Bureau <pbureau@xxxxxxxxxx>
- (no subject)
- From: Maximillian Murphy <m@xxxxxxxxxxxxxxxx>
- (no subject)
- From: John Mayer <linux_usb_msgs@xxxxxxxxx>
- linux 2.4.17 kernel, elo 1529L usb monitor with mag-tek card swipe reader (HID)
- From: "Jason Brewster" <jason.m.brewster@xxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Voice recorder does not get recognized
- From: Trond Husø <tr-huso@xxxxxxxxx>
- Re: Regarding to the USB2.0 high speed test.
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 2.6.21] Usb Serial Keyspan: add support for USA-49WG & USA-28XG
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 2.6.21] Usb Serial Keyspan: add support for USA-49WG & USA-28XG
- From: Lucy McCoy <lucy@xxxxxxxxxxx>
- Re: device descriptor read/64, error -110
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- device descriptor read/64, error -110
- From: "Damjan Jovanovic" <damjan.jov@xxxxxxxxx>
- Re: [PATCH] usb-storage: Add support for unusual device by Sierra Wireless
- From: Daniel Drake <dsd@xxxxxxxxxx>
- Re: [PATCH] usb-storage: Add support for unusual device by Sierra Wireless
- From: "Kevin Lloyd" <klloyd@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb-storage: Add support for unusual device by Sierra Wireless
- From: Daniel Drake <dsd@xxxxxxxxxx>
- Re: [PATCH] usb-storage: Add support for unusual device by Sierra Wireless
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- [PATCH] usb-storage: Add support for unusual device by Sierra Wireless
- From: Kevin Lloyd <klloyd@xxxxxxxxxxxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
- Re: differentiate pen drive and usb hdd
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- Re: differentiate pen drive and usb hdd
- From: Bertrik Sikken <bertrik@xxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: differentiate pen drive and usb hdd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Pierre Bureau <pbureau@xxxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Pierre Bureau <pbureau@xxxxxxxxxx>
- differentiate pen drive and usb hdd
- From: Radha Mohan <radhamohan_ch@xxxxxxxxx>
- gadgetfs, DaVinic and Monta Vista
- From: "Greg Strange" <greg@xxxxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB Disk errors
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb power management
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: g_ether on PXA255 with kernel-2.6.20.1
- From: Andre Haupt <haupt.andre@xxxxxx>
- g_ether on PXA255 with kernel-2.6.20.1
- From: Pierre Bureau <pbureau@xxxxxxxxxx>
- USB Disk errors
- From: James Green <james.green@xxxxxxxxxxxxxx>
- Re: usb power management
- From: Radha Mohan <radhamohan_ch@xxxxxxxxx>
- Re: No input interrupt endpoint
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: usb power management
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb power management
- From: Radha Mohan <radhamohan_ch@xxxxxxxxx>
- Re: No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: {Spam?} Re: No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: problem with usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Brother HL 1440
- From: Rik Bobbaers <Rik.Bobbaers@xxxxxxxxxxxxxx>
- Brother HL 1440
- From: Rik Bobbaers <Rik.Bobbaers@xxxxxxxxxxxxxx>
- Re: usb power management
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: No input interrupt endpoint
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Gene Heskett <gene.heskett@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Gene Heskett <gene.heskett@xxxxxxxxx>
- Re: problem with usb-storage
- From: Benjamin von Engelhardt <benjamin@xxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Gene Heskett <gene.heskett@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- usb power management
- From: Radha Mohan <radhamohan_ch@xxxxxxxxx>
- Re: usblp error handling broken
- From: Greg KH <greg@xxxxxxxxx>
- usblp error handling broken
- From: Jochen Karrer <jnkarrer@xxxxxx>
- No input interrupt endpoint
- From: "Michael St. Laurent" <mikes@xxxxxxxxxxxxxxxx>
- Re: usb with dual serial ports - one missing
- From: "Dovydas Sankauskas" <laisve@xxxxxxxxx>
- Re: Problem with external USB2 HDD
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem with external USB2 HDD
- From: "Fredrik Öberg" <crazyswede@xxxxxxxxx>
- Re: usb with dual serial ports - one missing
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Problem with external USB2 HDD
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- usb with dual serial ports - one missing
- From: "Dovydas Sankauskas" <laisve@xxxxxxxxx>
- Problem with external USB2 HDD
- From: "Fredrik Öberg" <crazyswede@xxxxxxxxx>
- Re: problem with usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: problem with usb-storage
- From: Benjamin von Engelhardt <benjamin@xxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Stephen Beaver <sbeaver@xxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: problem with usb-storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- problem with usb-storage
- From: Benjamin von Engelhardt <benjamin@xxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Diego Zuccato <diego@xxxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Force HID keyboard instead of mouse (IR remote)
- From: Łukasz Góralczyk <lukasz.goralczyk@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: Playstation Portable errors
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Playstation Portable errors
- From: "etoom etoom" <qetoom@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Paul Fulghum <paulkf@xxxxxxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [linux-usb-devel] usbdevice opening problem.
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- usbdevice opening problem.
- From: "Deepak Katagade" <deepak.ckm@xxxxxxxxx>
- [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- [SOLVED] Serial buffer corruption [was Re: FTDI usb-serial possible bug]
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Dirk Försterling <r@xxxxxxxxx>
- MX1000 Evdev Trouble
- From: Jeremy Nickurak <linux-usb@xxxxxxxxxxxxxxxxxx>
- Re: Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- Re: Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- Re: Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Dirk Försterling <r@xxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Dirk Försterling <r@xxxxxxxxx>
- Re: Why would ehci-hcd slow down the network?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Why would ehci-hcd slow down the network?
- From: Dirk Försterling <r@xxxxxxxxx>
- Re: USB: Non zero status
- From: "santana.mail@xxxxxxxxxxxx" <santana.mail@xxxxxxxxxxxx>
- Re: USB: Non zero status
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: pl2303: what does error 1 means
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB: Non zero status
- From: "santana.mail@xxxxxxxxxxxx" <santana.mail@xxxxxxxxxxxx>
- pl2303: what does error 1 means
- From: Daniel Boone <daniel.boone@xxxxxxxxx>
- Re: USB media (CF/MMC/SD) reader question
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB media (CF/MMC/SD) reader question
- From: "Stephen J. Gowdy" <Stephen.Gowdy@xxxxxxx>
- USB media (CF/MMC/SD) reader question
- From: TMC <tmciolek@xxxxxxxxx>
- Any tutorial information on HID reports and features?
- From: davehigton@xxxxxxxxxxxxx
- Re: How to check the USB device existence
- From: Greg KH <greg@xxxxxxxxx>
- Re: How to check the USB device existence
- From: Greg KH <greg@xxxxxxxxx>
- recommendation for usb wireless adapter
- From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
- Re: How to check the USB device existence
- From: "Babu, Narendra (GE Healthcare)" <Narendra.Babu@xxxxxx>
- Re: How to check the USB device existence
- From: Karl Hiramoto <karl@xxxxxxxxxxxx>
- How to check the USB device existence
- From: "Babu, Narendra (GE Healthcare)" <Narendra.Babu@xxxxxx>
- Hard drive enclosures that work with linux-usb
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- Re: USB attached MP3 player keeps resetting
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB attached MP3 player keeps resetting
- From: Vitezslav Kotrla <vitko@xxxxxxx>
- Re: SOLVED: status of OV518 drivers
- From: markus reichelt <ml@xxxxxxxxxxxxx>
- Re: USB disconnects with Happauge Nova-T 500
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: FATAL: Error inserting g_ether
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB attached MP3 player keeps resetting
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB attached MP3 player keeps resetting
- From: Vitezslav Kotrla <vitko@xxxxxxx>
- Re: FATAL: Error inserting g_ether
- From: Oliveiros Peixoto <oliveiros@xxxxxxxxxx>
- Re: FATAL: Error inserting g_ether
- From: Oliveiros Peixoto <oliveiros@xxxxxxxxxx>
- Re: device no longer working after MB change
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB disconnects with Happauge Nova-T 500
- From: "Mike H" <mike@xxxxxxxxxxxxx>
- Re: FATAL: Error inserting g_ether
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: FATAL: Error inserting g_ether
- From: Oliveiros Peixoto <oliveiros@xxxxxxxxxx>
- Re: FATAL: Error inserting g_ether
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- FATAL: Error inserting g_ether
- From: Oliveiros Peixoto <oliveiros@xxxxxxxxxx>
- Re: Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: device no longer working after MB change
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Comsol UHD-3542 3.5" HDD enclosure ( PATA to USB 2.0 )
- From: "Jesus Jr M Salvo" <jesus.m.salvo@xxxxxxxxx>
- device no longer working after MB change
- From: "Jim & Stephanie Matthews" <bjmsam@xxxxxxxxxxx>
- (no subject)
- From: "Pavel Bartusek" <ca650907@xxxxxxxxxx>
- PL2305 parallel port driver
- From: Andre Neto <andre.neto@xxxxxxxxxxxxxx>
- Request for assistance
- From: Mark Glassberg <vzeeaxwl@xxxxxxxxxxx>
- Fw: usb hdd
- From: "oliver CNSISP" <support@xxxxxxxxxxx>
- FTDI usb-serial possible bug
- From: "Antonino Ingargiola" <tritemio@xxxxxxxxx>
- Help with USB keyboard
- From: Sean Edwards <cybersean3000@xxxxxxxxx>
- Problem with Sony USB card reader
- Re: usb hdd
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- usb hdd
- From: "oliver CNSISP" <support@xxxxxxxxxxx>
- Canon PIXMA MP160 all-in-one
- From: Leslie Katz <lesliek19@xxxxxxxxxxxx>
- Re: Console over usb serial gadget
- From: Greg KH <greg@xxxxxxxxx>
- Re: Recovering a USB stick Partition table
- From: Bob Sass <rls@xxxxxxxxxxxx>
- Re: Recovering a USB stick Partition table
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Nokia N73 with 2gb minisd card
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Recovering a USB stick Partition table
- From: "Styma, Robert E (Robert)" <stymar@xxxxxxxxxxxxxxxxxx>
- Re: Nokia N73 with 2gb minisd card
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Nokia N73 with 2gb minisd card
- From: Luca <marrazzo.luca@xxxxxx>
- Re: Nokia N73 with 2gb minisd card
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Nokia N73 with 2gb minisd card
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: User space access: Operation not permi
- From: sza2 <klt29@xxxxxxxxxxx>
- USB HID reports and features tutorial material
- From: davehigton@xxxxxxxxxxxxx
- Re: User space access: Operation not permi
- From: sza2 <klt29@xxxxxxxxxxx>
- Re: User space access: Operation not permi
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: User space access: Operation not permi
- From: sza2 <klt29@xxxxxxxxxxx>
- Nokia N73 with 2gb minisd card
- From: Luca <marrazzo.luca@xxxxxx>
- Re: device descriptor read/64, error -62 with CONFIG_HZ=1000
- From: Sebastian Kemper <sebastian_ml@xxxxxxx>
- Re: User space access: Operation not permitted
- From: "Xiaofan Chen" <xiaofanc@xxxxxxxxx>
- Re: User space access: Operation not permitted
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- User space access: Operation not permitted
- From: sza2 <klt29@xxxxxxxxxxx>
- Re: Device not detected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: device descriptor read/64, error -62 with CONFIG_HZ=1000
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>