Re: [PATCH 5/9] ARM: fix netx/MLO/s5p image build for pbl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22:01 Fri 10 Aug     , Sascha Hauer wrote:
> If pbl support is enabled only zbarebox.bin was built, but
> not the SoC specific images. Fix this.
yeah it does the trick but I do not like the makefile target
we need to create cmd and use the $(call xxx,ifchanged) mecanism

Best Regards,
J.
> 
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
>  arch/arm/Makefile |   35 ++++++++++++++++++++++-------------
>  1 file changed, 22 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 89f645b..63bc9be 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -160,7 +160,16 @@ CPPFLAGS += -fdata-sections -ffunction-sections
>  LDFLAGS_barebox += -static --gc-sections
>  endif
>  
> -barebox.netx: barebox.bin
> +ifdef CONFIG_IMAGE_COMPRESSION
> +KBUILD_BINARY := arch/arm/pbl/zbarebox.bin
> +KBUILD_TARGET := zbarebox.bin
> +$(KBUILD_BINARY): $(KBUILD_TARGET)
> +else
> +KBUILD_BINARY := barebox.bin
> +KBUILD_TARGET := barebox.bin
> +endif
> +
> +barebox.netx: $(KBUILD_BINARY)
>  	$(Q)scripts/gen_netx_image -i $< -o barebox.netx		\
>  		--sdramctrl=$(CONFIG_NETX_SDRAM_CTRL)			\
>  		--sdramtimctrl=$(CONFIG_NETX_SDRAM_TIMING_CTRL)		\
> @@ -169,36 +178,36 @@ barebox.netx: barebox.bin
>  		--cookie=$(CONFIG_NETX_COOKIE);
>  
>  ifeq ($(machine-y),netx)
> -KBUILD_IMAGE := barebox.netx
> +KBUILD_TARGET := barebox.netx
> +KBUILD_BINARY := $(KBUILD_TARGET)
>  endif
>  
> -barebox.s5p: barebox.bin
> +barebox.s5p: $(KBUILD_BINARY)
>  	$(Q)scripts/s5p_cksum $< barebox.s5p
>  
>  ifeq ($(CONFIG_ARCH_S5PCxx),y)
> -KBUILD_IMAGE := barebox.s5p
> +KBUILD_TARGET := barebox.s5p
> +KBUILD_BINARY := $(KBUILD_TARGET)
>  endif
>  
> -MLO: barebox.bin
> +MLO: $(KBUILD_BINARY)
>  	@echo "  IFT    " $@
>  	$(Q)scripts/omap_signGP $< $(TEXT_BASE) 1
>  	$(Q)test -e $<.ift && mv $<.ift MLO
>  
>  ifeq ($(CONFIG_OMAP_BUILD_IFT),y)
> -KBUILD_IMAGE := MLO
> +KBUILD_TARGET := MLO
> +KBUILD_BINARY := $(KBUILD_TARGET)
>  endif
>  
> -barebox.ubl: barebox.bin
> +barebox.ubl: $(KBUILD_BINARY)
>  	@echo "  UBL    " $@
>  	$(Q)scripts/mkublheader $< > barebox.ubl
>  	$(Q)cat $< >> barebox.ubl
>  
>  ifeq ($(CONFIG_ARCH_DAVINCI),y)
> -KBUILD_IMAGE := barebox.ubl
> -endif
> -
> -ifdef CONFIG_IMAGE_COMPRESSION
> -KBUILD_IMAGE := zbarebox.bin
> +KBUILD_TARGET := barebox.ubl
> +KBUILD_BINARY := $(KBUILD_TARGET)
>  endif
>  
>  pbl := arch/arm/pbl
> @@ -208,7 +217,7 @@ zbarebox.S zbarebox.bin zbarebox: barebox.bin
>  archclean:
>  	$(MAKE) $(clean)=$(pbl)
>  
> -all: $(KBUILD_IMAGE)
> +all: $(KBUILD_BINARY)
>  
>  archprepare: maketools
>  maketools:
> -- 
> 1.7.10.4
> 

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox


[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux