[PATCH V2 0/8] arm: mxs: add ocotp write support

[Wolfram Sang <w.sang@xxxxxxxxxxxxxx>]

Because OCOTP write needs to change HCLK and VDDIO, some preparations are
needed before we can finally write to OCOTP. Tested with a custom board and a
TX28.

V2:

Patch 5/8: - add unit "uV" to function parameter name
Patch 8/8: - get rid of #ifdefs by using IS_ENABLED
	   - only populate write-function if really needed

Wolfram Sang (8):
  arm: mxs: make get_hclk result useable for upcoming set_hclk
  arm: mxs: add imx_set_hclk
  arm: mxs: refactor access to power domain
  arm: mxs: add POWER_BASE for MX28, too
  arm: mxs: add functions to get/set vddio
  arm: mxs: refactor timeout routine for ocotp
  arm: mxs: use consistent naming for #defines for ocotp
  arm: mxs: add write support for ocotp

 arch/arm/mach-mxs/Kconfig                    |   11 ++
 arch/arm/mach-mxs/Makefile                   |    2 +-
 arch/arm/mach-mxs/include/mach/clock-imx23.h |    1 +
 arch/arm/mach-mxs/include/mach/clock-imx28.h |    1 +
 arch/arm/mach-mxs/include/mach/imx28-regs.h  |    1 +
 arch/arm/mach-mxs/include/mach/power.h       |    8 ++
 arch/arm/mach-mxs/ocotp.c                    |  150 +++++++++++++++++++++++---
 arch/arm/mach-mxs/power.c                    |   84 +++++++++++++++
 arch/arm/mach-mxs/speed-imx23.c              |   26 ++++-
 arch/arm/mach-mxs/speed-imx28.c              |   26 ++++-
 arch/arm/mach-mxs/usb.c                      |   30 +-----
 11 files changed, 290 insertions(+), 50 deletions(-)
 create mode 100644 arch/arm/mach-mxs/include/mach/power.h
 create mode 100644 arch/arm/mach-mxs/power.c

-- 
1.7.10


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox