Re: OMAP4 Panda - MMC access broken
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
On Mon, Apr 02, 2012 at 08:07:16PM +0530, Anand Gadiyar wrote:The correct way would be to make all this stuff 64bit types. I am
> On Fri, Mar 30, 2012 at 10:04 PM, Anand Gadiyar <gadiyar@xxxxxxxxx> wrote:
> > Hi all,
> > I've just started playing with barebox on OMAP4. I see that with "Release
> > v2011.11.0", my Panda could access the SD card contents, but with the
> > current release it can no longer do so.
> > Git bisect shows commit 82db23d3f4c1de25bbd4b222a3bd9e81d00414f8 (Use
> > generic block layer to access the drives and do partition parsing) is when
> > it stopped working.
> > Any pointers?
> > Thanks in advance,
> > Anand
> Found the problem. I was using a 4GB SD card with just a single FAT32
> partition. The pentry.size is reported as 7744449 which fails the
> check_offset_value() call.
> I think this is the same issue Sanjeev reported in February.
> Below patch seems to fix the issue for now. But I'm not sure what's the
> correct way to fix this.
working for this for quite some time and have a series for an older
barebox doing this. I would have to rebase it.
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox