|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
TIA, My guess would be that you don't have enough RAM to do the calibration, nor to scan at any decent resolution. I would think 256MB would be a bare minimum, and I have 512. I'm sure others on this list would recommend more RAM than this even. David > -----Original Message----- > From: firstname.lastname@example.org [mailto:email@example.com]On Behalf Of > Biel da Silva > Sent: Friday, 10 May 2002 6:54 a.m. > To: firstname.lastname@example.org > Subject: Canoscan fs4000us --> Couldn't open file (0x00000b01) > > > > hi! > > after instal filget via usb, no problem... > > but after insert slide mount filget say > > Calibrating... > > after this the message of error of subject... > > what happen ? > > free hd space 529 mg > 64 ram > amd 400mhz > notebook hiunday > > TIA > - > Turn off HTML mail features. Keep quoted material short. Use accurate > subject lines. http://www.leben.com/lists for list instructions. > - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.