|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
I have an Epson 1000C scanner and EU 13 transparency adapter. I'm having a problem with the unit so that when the cover is closed, the software will say the cover is open. Sometimes raising the cover a bit or putting a book on the cover to weigh it down more will allow the scanning to proceed. It seems like it is either a problem with the contacts between the scanner and adapter, or a bad wire, but I cannot find any mechanical pin to indicate a contact point. Does anyone have suggestions of how to figure this out? -- Allen Birnbach ALLEN BIRNBACH PHOTOGRAPHY, INC. firstname.lastname@example.org http://www.allenbirnbach.com - Turn off HTML mail features. Keep quoted material short. Use accurate subject lines. http://www.leben.com/lists for list instructions.