[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Google
  Web www.spinics.net

RE: [Redhat-s390-list] X-mas wishes



Michael,

After you did the insmod, what, if anything, showed up in the kernel ring
buffer, as shown by the dmesg command?  That's the only place you're going
to see any error messages.

Mark Post

-----Original Message-----
From: Michael K Lambert [mailto:mlambe7@lsu.edu]
Sent: Friday, December 21, 2001 11:52 AM
To: Post, Mark K
Cc: redhat-s390-list@redhat.com
Subject: RE: [Redhat-s390-list] X-mas wishes



Mark,

An lsmod reveals that the ctc module is not being loaded at startup. I can
insmod it successfully, but when I attempt to ifconfig the correct
settings, I get:

"SIOCSIFMTU: No such device
ctc0: unknown interface: No such device"

 A cat of chandev and subchannels reveals that the ctcs are not being
detected. My parmfile reads:

"root=/dev/dasdb1 dasd=400-401  iucv=linuxsx root=/dev/dasdb1 noinitrd
chandev=ct
c0,0x2000,0x2001"

My ifcfg-ctc0 reads:

"DEVICE=ctc0
BOOTPROTO=static
IPADDR=10.0.0.3
NETMASK=255.255.255.255
ONBOOT=yes
REMIP=10.0.0.4"


My modules.conf reads:

"alias parport_lowlevel parport_pc
alias iucv0 netiucv
options netiucv iucv=TCPIP
alias ctc0 ctc"


As I said, I realize that I'm missing something, I'm just not sure what.

Michael Lambert



[Home]     [LKML]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Linux s390]     [Gimp]     [Yosemite News]

Powered by Linux