[Prev Page][Next Page]
- Re: integrated listing mechanism with rpm, listing contents of rpm files.
- From: Edward Peschko <horos11@xxxxxxxxx>
- Re: integrated listing mechanism with rpm, listing contents of rpm files.
- From: Edward Peschko <horos11@xxxxxxxxx>
- Re: integrated listing mechanism with rpm, listing contents of rpm files.
- integrated listing mechanism with rpm, listing contents of rpm files.
- From: Edward Peschko <horos11@xxxxxxxxx>
- Re: Supress tar output for %setup
- From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Supress tar output for %setup
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: rpmbuild error
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: rpmbuild error
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: rpmbuild error
- Re: rpmbuild error
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: rpmbuild error
- Re: rpmbuild error
- From: Lawrence Sorrillo <sorrillo@xxxxxxxx>
- Re: rpmbuild error
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- rpmbuild error
- Re: --provides epoch
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Re: --provides epoch
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
- --provides epoch
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: Overriding %doc
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: reconstituting bin rpm from installed package (rewind function)
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- RE: Question on the content of a rpm
- From: Joao Carlos Vieira Carreira da Silva <j.c.silva@xxxxxxx>
- Question on the content of a rpm
- From: "HU Ben" <Ben.Hu@xxxxxxxxxxxxxxxxxx>
- querying behavior of built in c-macros. (was definition of %doc)
- From: Edward Peschko <horos11@xxxxxxxxx>
- Overriding %doc
- From: Edward Peschko <horos11@xxxxxxxxx>
- Re: reconstituting bin rpm from installed package (rewind function)
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- reconstituting bin rpm from installed package (rewind function)
- From: Edward Peschko <horos11@xxxxxxxxx>
- Re: Dependency of RPM and package (multi version for same package)
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Re: Dependency of RPM and package (multi version for same package)
- From: Huo QiFeng <huoqifeng@xxxxxxxxx>
- Re: trivial command to extract files from an rpm file.
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: trivial command to extract files from an rpm file.
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- trivial command to extract files from an rpm file.
- From: Edward Peschko <horos11@xxxxxxxxx>
- Re: Dependency of RPM and package (multi version for same package)
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: build requires query?
- From: Jeff Johnson <n3npq@xxxxxxx>
- Dependency of RPM and package (multi version for same package)
- From: Huo QiFeng <huoqifeng@xxxxxxxxx>
- RE: Adding Features / Components of a software to RPM database
- From: Jiju Jacob <JJacob@xxxxxxxxxxxxxxxxxxx>
- Re: Adding Features / Components of a software to RPM database
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- Adding Features / Components of a software to RPM database
- From: Jiju Jacob <JJacob@xxxxxxxxxxxxxxxxxxx>
- Adding Features / Components of a software to RPM database
- From: Jiju Jacob <JJacob@xxxxxxxxxxxxxxxxxxx>
- Re: noarch RPM weirdness
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: build requires query?
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- trivial command to make an rpm file
- From: Edward Peschko <horos11@xxxxxxxxx>
- noarch RPM weirdness
- From: Eric Chamberlain <Eric.Chamberlain@xxxxxxxxxxxxxxxx>
- Re: build requires query?
- From: Radu Gasler <rgasler@xxxxxxxxxxxxx>
- build requires query?
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: Dependency of RPM package (multi version)
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Re: Dependency of RPM package (multi version)
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Re: Dependency of RPM package (multi version)
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Dependency of RPM package (multi version)
- From: Huo QiFeng <huoqifeng@xxxxxxxxx>
- Re: Dependency of RPM package (multi version)
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Dependency of RPM package (multi version)
- From: Huo QiFeng <huoqifeng@xxxxxxxxx>
- Re: Requires/Provides in spec file
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Requires/Provides in spec file
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- stuck rpm process on dist upgrade
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
- Re: need "cheat" to package installed files into RPMS
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- Re: need "cheat" to package installed files into RPMS
- From: Andy Helten <andy.helten@xxxxxxxxxxxx>
- Re: need "cheat" to package installed files into RPMS
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- need "cheat" to package installed files into RPMS
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- Re: RPM Obsoletes don't work like I want them to
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- RPM Obsoletes don't work like I want them to
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- Using "/" as prefix in spec file
- From: Thawan Kooburat <kthawan@xxxxxxxxx>
- Re: use of %%dir in spec file
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: use of %%dir in spec file
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: use of %%dir in spec file
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: use of %%dir in spec file
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- use of %%dir in spec file
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Question about conditionally including files into the %files section
- From: Jim Galarowicz <jeg@xxxxxxxxxxxxx>
- Re: rpm file name generated from spec
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: rpm file name generated from spec
- From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: rpm file name generated from spec
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- rpm file name generated from spec
- From: Todd Rinaldo <toddr@xxxxxxxxxx>
- Re: rpmbuild ignoring --macros?
- From: Andy Armstrong <andy@xxxxxxxxxx>
- Re: rpmbuild ignoring --macros?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: rpmbuild ignoring --macros?
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Re: rpmbuild ignoring --macros?
- From: Andy Armstrong <andy@xxxxxxxxxx>
- Re: rpmbuild ignoring --macros?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- rpmbuild ignoring --macros?
- From: Andy Armstrong <andy@xxxxxxxxxx>
- Re: Dependency only RPM
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Re: Dependency only RPM
- From: Andy Armstrong <andy@xxxxxxxxxx>
- Re: Dependency only RPM
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Dependency only RPM
- From: Andy Armstrong <andy@xxxxxxxxxx>
- Re: Enforcing dependencies between RPMs
- From: Erez Zilber <erezzi.list@xxxxxxxxx>
- Design problem: etc that is not /etc? other pseudo subdirectories and instance handling?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Enforcing dependencies between RPMs
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- RE: Enforcing dependencies between RPMs
- From: "Jason Pyeron" <jpyeron@xxxxxxxx>
- Enforcing dependencies between RPMs
- From: Erez Zilber <erezzi.list@xxxxxxxxx>
- Re: Found '/usr/src/redhat/BUILD/NetWatch-root' in installed files; aborting
- From: Fulko Hew <fulko.hew@xxxxxxxxx>
- Found '/usr/src/redhat/BUILD/NetWatch-root' in installed files; aborting
- From: Fulko Hew <fulko.hew@xxxxxxxxx>
- Re: RPM verification fails with unsatisfied dependencies for libraries provided by the RPM
- From: Andy Helten <andy.helten@xxxxxxxxxxxx>
- _prefix hard-coded to /usr?
- Re: RPM verification fails with unsatisfied dependencies for libraries provided by the RPM
- From: Mitko Haralanov <mitko@xxxxxxxxxx>
- RPM verification fails with unsatisfied dependencies for libraries provided by the RPM
- From: Andy Helten <andy.helten@xxxxxxxxxxxx>
- Re: _prefix hard-coded to /usr?
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- Re: _prefix hard-coded to /usr?
- Re: _prefix hard-coded to /usr?
- Re: _prefix hard-coded to /usr?
- From: Mitko Haralanov <mitko@xxxxxxxxxx>
- _prefix hard-coded to /usr?
- Re: how to get version of package 'x' when installing package 'y'
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: signing an rpm without user interaction
- From: Dotan Barak <dotanba@xxxxxxxxx>
- signing an rpm without user interaction
- From: Martin Koller <martin.koller@xxxxxx>
- Re: how to get version of package 'x' when installing package 'y'
- From: Fulko Hew <fulko.hew@xxxxxxxxx>
- Re: how to get version of package 'x' when installing package 'y'
- From: Jos Vos <jos@xxxxxx>
- how to get version of package 'x' when installing package 'y'
- From: Fulko Hew <fulko.hew@xxxxxxxxx>
- Querying values defined in a spec file
- From: Mitko Haralanov <mitko@xxxxxxxxxx>
- Re: hardcode files in %files stanza
- From: Jos Vos <jos@xxxxxx>
- Re: hardcode files in %files stanza
- From: pbdlists@xxxxxxxxxxxx
- Re: generic %if conditional in rpm
- From: Jos Vos <jos@xxxxxx>
- Re: generic %if conditional in rpm
- From: Jos Vos <jos@xxxxxx>
- generic %if conditional in rpm
- From: Edward Peschko <horos11@xxxxxxxxx>
- hardcode files in %files stanza
- From: Barry R Cisna <brcisna@xxxxxxxxxxxxx>
- hardcode files in %files stanza
- From: Barry R Cisna <brcisna@xxxxxxxxxxxxx>
- Re: hardcode files in %files stanza
- From: pbdlists@xxxxxxxxxxxx
- hardcode files in %files stanza
- From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
- application hang within RPM library call
- From: Dave Peterson <dave_peterson@xxxxxxxxxx>
- ./configure error
- From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
- Re: install variable for kernel version
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- install variable for kernel version
- From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
- Re: install variable for kernel version
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- install variable for kernel version
- From: Barry Cisna <brcisna@xxxxxxxxxxxxx>
- Re: rpm -U options
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- rpm -U options
- From: shruthi srinivasalu <shruthisrinivasalu@xxxxxxxxxxx>
- Re: RPM and file extended attributes
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: F11 RPM does not substitute %{PATCH0} anymore
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- F11 RPM does not substitute %{PATCH0} anymore
- From: Jos Vos <jos@xxxxxx>
- RE: RPM and file extended attributes
- From: "Mangalampalli, JayantX" <jayantx.mangalampalli@xxxxxxxxx>
- Re: RPM and file extended attributes
- From: Chad Sellers <csellers@xxxxxxxxxx>
- RPM and file extended attributes
- From: "Mangalampalli, JayantX" <jayantx.mangalampalli@xxxxxxxxx>
- Re: rpm queryformat %{fileverifyflags}
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- rpm queryformat %{fileverifyflags}
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: rpmlib(FileDigests)
- From: Andrew Ziem <ahz001@xxxxxxxxx>
- Re: rpmlib(FileDigests)
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: Variable for version/release?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Variable for version/release?
- From: Jos Vos <jos@xxxxxx>
- Re: Variable for version/release?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Variable for version/release?
- From: Jos Vos <jos@xxxxxx>
- Variable for version/release?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- rpmlib(FileDigests)
- From: Andrew Ziem <ahz001@xxxxxxxxx>
- dependencies and the %post section
- From: Fulko Hew <fulko.hew@xxxxxxxxx>
- Re: *** ERROR: No build ID note found in problem
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- *** ERROR: No build ID note found in problem
- From: ram s <ramforummail@xxxxxxxxx>
- Re: Startup script file conflict with /etc/init.d
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- How to handle variable paths and multiple instances?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Using .deb style subdirectories with rpm?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Using .deb style subdirectories with rpm?
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- Re: Using .deb style subdirectories with rpm?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Using .deb style subdirectories with rpm?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Using .deb style subdirectories with rpm?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Using .deb style subdirectories with rpm?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Startup script file conflict with /etc/init.d
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- RPM tutorial at Linux conference Dresden (Germany)
- From: Jos Vos <jos@xxxxxx>
- Sample spec file for rpm that install icon in the panel launcher?
- From: vs <victor_sira@xxxxxxxxx>
- Re: Files packaged in /var won't be affected by rpm -U?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Files packaged in /var won't be affected by rpm -U?
- From: vs <victor_sira@xxxxxxxxx>
- Re: Files packaged in /var won't be affected by rpm -U?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Files packaged in /var won't be affected by rpm -U?
- From: vs <victor_sira@xxxxxxxxx>
- RE: Expat causing rpm failure
- From: "Peter Beck" <peter@xxxxxxxxxx>
- Re: Expat causing rpm failure
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- Conversion from Sun Solaris Packaging
- From: James R Maxwell <jrmaxwell@xxxxxxxxxxxx>
- Re: Expat causing rpm failure
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Expat causing rpm failure
- From: "Peter Beck" <peter@xxxxxxxxxx>
- Re: Can I use cp in %install section of spec
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Can I use cp in %install section of spec
- From: ram s <ramforummail@xxxxxxxxx>
- still having signature issues
- From: "Dave" <dave.mehler@xxxxxxxxx>
- RE: bad gpg signature on src.rpm?
- From: "Dave" <dave.mehler@xxxxxxxxx>
- Re: bad gpg signature on src.rpm?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- RE: bad gpg signature on src.rpm?
- From: "Dave" <dave.mehler@xxxxxxxxx>
- Re: bad gpg signature on src.rpm?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- bad gpg signature on src.rpm?
- From: "Dave" <dave.mehler@xxxxxxxxx>
- Re: rpm dependency fail
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Rpm-list Digest, Vol 43, Issue 4
- From: ram s <ramforummail@xxxxxxxxx>
- rpm dependency fail
- From: ram s <ramforummail@xxxxxxxxx>
- Re: Cannot include sub directories and files in rpm package
- From: pbdlists@xxxxxxxxxxxx
- Cannot include sub directories and files in rpm package
- From: ram s <ramforummail@xxxxxxxxx>
- Problem on build
- From: ram s <ramforummail@xxxxxxxxx>
- Re: still having spec file difficulties, FRUSTRATING!!!
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: How to run own shell script from spec
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: passing an option to rpmbuild
- From: Daniel Bahena <daniel.bahena@xxxxxxxxx>
- passing an option to rpmbuild
- From: "Dave" <dave.mehler@xxxxxxxxx>
- How to run own shell script from spec
- From: ram s <ramforummail@xxxxxxxxx>
- Re: Solved binary package creation!Have some doubts...
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- still having spec file difficulties, FRUSTRATING!!!
- From: "Dave" <dave.mehler@xxxxxxxxx>
- Re: Solved binary package creation!Have some doubts...
- From: ram s <ramforummail@xxxxxxxxx>
- Solved binary package creation!Have some doubts...
- From: ram s <ramforummail@xxxxxxxxx>
- RE: RPM Build errors
- From: "Jason Pyeron" <jpyeron@xxxxxxxx>
- RPM Build errors
- From: ram s <ramforummail@xxxxxxxxx>
- RE:rpm packaging problem
- From: ram s <ramforummail@xxxxxxxxx>
- repost: help and questions on first rpm
- From: "Dave" <dave.mehler@xxxxxxxxx>
- Re: rpm packaging problem
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- rpm packaging problem
- From: ram s <ramforummail@xxxxxxxxx>
- help with first rpm
- From: "Dave" <dave.mehler@xxxxxxxxx>
- Re: RPM Packaging doubts
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re:RPM Packaging doubts
- From: ram s <ramforummail@xxxxxxxxx>
- Re: RPM Packaging doubts
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- RPM Packaging doubts
- From: ram s <ramforummail@xxxxxxxxx>
- RPM API dependency query
- From: Vijay Tirumalai <vijay.tirumalai@xxxxxxxxx>
- how to get the build time using rpm api
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
- Re: chmod on subdirectories and files
- From: Richard Siddall <richard.siddall@xxxxxxxxxxx>
- Re: chmod on subdirectories and files
- From: George Machitidze <giomac@xxxxxxxxx>
- --relocate and --prefix ?
- From: Andrei Kazarov <Andrei.Kazarov@xxxxxxx>
- Re: chmod on subdirectories and files
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- chmod on subdirectories and files
- From: George Machitidze <giomac@xxxxxxxxx>
- Re: Transaction Set API query
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Please help: how to relocate installed files paths into an RPM database
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Please help: how to relocate installed files paths into an RPM database
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
- Re: How-to not get a "depency resolution failed" for a already existing library.
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Re: How-to not get a "depency resolution failed" for a already existing library.
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- How-to not get a "depency resolution failed" for a already existing library.
- From: L Pierre <pierrelud@xxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
- Re: configuration rpms
- From: Florian Festi <ffesti@xxxxxxxxxx>
- configuration rpms
- From: abhinav mehrotra <talk2abhinav@xxxxxxxxx>
- Transaction Set API query
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Phebe_Mertes@xxxxxxxxxxxxxxxxx
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
- Re: Please help: how to relocate installed files paths into an RPM database
- From: Phebe_Mertes@xxxxxxxxxxxxxxxxx
- Please help: how to relocate installed files paths into an RPM database
- From: Matteo Pampolini <matteo.pampolini@xxxxxxxxx>
- Re: Running a bash script in RPM install
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Running a bash script in RPM install
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Running a bash script in RPM install
- From: Vinay Kalkoti <kalkoti.vinay@xxxxxxxxx>
- Re: How to RPM'ify Perl Modules
- From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
- Re: How to RPM'ify Perl Modules
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: RPM package bundle problem.
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- RE: RPM package bundle problem.
- From: "NgaNTH" <nganth@xxxxxxxxxxxx>
- Re: RPM package bundle problem.
- From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
- RE: RPM package bundle problem.
- From: "NgaNTH" <nganth@xxxxxxxxxxxx>
- Re: RPM package bundle problem.
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- RPM package bundle problem.
- From: "NgaNTH" <nganth@xxxxxxxxxxxx>
- How to RPM'ify Perl Modules
- From: Fulko Hew <fulko.hew@xxxxxxxxx>
- Re: possible to build an RPM from source directory rather than tarball?
- From: Shawn Rutledge <shawn.t.rutledge@xxxxxxxxx>
- ERROR: Cannot get shared lock on RPM Database
- From: "Rob Maidment" <Rob.Maidment@xxxxxxxxxxxxxx>
- Re: why is database location under /${prefix} ?
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: why is database location under /${prefix} ?
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- why is database location under /${prefix} ?
- From: "Rob Maidment" <Rob.Maidment@xxxxxxxxxxxxxx>
- Re: How to create one rpm package which only contains specified directory?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Conditional dependancy
- From: "Mehrotra, Abhinav (GE Healthcare)" <Abhinav.Mehrotra@xxxxxx>
- Re: How to create one rpm package which only contains specified directory?
- From: Michael Barto <mbarto@xxxxxxxxxxxxx>
- Re: More than one topdir in .rpmmacros?
- From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
- Re: More than one topdir in .rpmmacros?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: More than one topdir in .rpmmacros?
- From: Nigel Metheringham <nigel.metheringham@xxxxxxxxxxxxxxxxxxxxxx>
- More than one topdir in .rpmmacros?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: rpm dependency failed because the directory path doesn't exist
- From: zhang zjmtt <jullyzhang@xxxxxxxxx>
- Re: possible to build an RPM from source directory rather than tarball?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- possible to build an RPM from source directory rather than tarball?
- From: Shawn Rutledge <shawn.t.rutledge@xxxxxxxxx>
- Re: rpm dependency failed because the directory path doesn't exist
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: rpm dependency failed because the directory path doesn't exist
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: rpm dependency failed because the directory path doesn't exist
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: How to avoid reinstalling deliberately deleted config files on upgrade
- From: Richard Siddall <richard.siddall@xxxxxxxxxxx>
- rpm dependency failed because the directory path doesn't exist
- From: zhang zjmtt <jullyzhang@xxxxxxxxx>
- RPM at the Linux Tag 2009 in Berlin
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: How to avoid reinstalling deliberately deleted config files on upgrade
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- How to avoid reinstalling deliberately deleted config files on upgrade
- From: Richard Siddall <richard.siddall@xxxxxxxxxxx>
- Re: merging (sub-)packages
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- [no subject]
- From: rarob@xxxxxxxxxxxxxxxxxxxxxx
- Re: error: unpacking of archive failed on file ...rpm; 4a2a2501: cpio: Digest mismatch
- From: tjoen <tjoen@xxxxxx>
- error: unpacking of archive failed on file ...rpm;4a2a2501: cpio: Digest mismatch
- From: tjoen <tjoen@xxxxxx>
- Re: Upgrade from rpm 3.0.6
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Upgrade from rpm 3.0.6
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
- Re: Upgrade from rpm 3.0.6
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: Upgrade from rpm 3.0.6
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
- Upgrade from rpm 3.0.6
- From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
- Re: help with rpmbuild
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- help with rpmbuild
- From: X Y <writeacomment@xxxxxxxxx>
- Re: Using {dist} when I only have pre-compiled binaries?
- From: Matt Harrington <mbh.lists@xxxxxxxxx>
- Re: Using {dist} when I only have pre-compiled binaries?
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Re: Using {dist} when I only have pre-compiled binaries?
- From: Matt Harrington <mbh.lists@xxxxxxxxx>
- Re: Using {dist} when I only have pre-compiled binaries?
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Using {dist} when I only have pre-compiled binaries?
- From: Matt Harrington <mbh.lists@xxxxxxxxx>
- RPM API to install rpms
- From: shruthi srinivasalu <shruthisrinivasalu@xxxxxxxxxxx>
- Re: File name conflicts with other similar packages?
- From: Florian Festi <ffesti@xxxxxxxxxx>
- File name conflicts with other similar packages?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: Is it possible to tweak checksums etc. in the RPM DB?
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Re: How to create one rpm package which only contains specified directory?
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: problem with ./configure of rpm-4.7.0
- From: Panu Matilainen <pmatilai@xxxxxxxxxx>
- problem with ./configure of rpm-4.7.0
- From: "Onofre, Tracy" <tracy.onofre@xxxxxxxx>
- Is it possible to tweak checksums etc. in the RPM DB?
- From: lassmann@xxxxxxxxxx
- How to create one rpm package which only contains specified directory?
- From: "He Yunlong-B20256" <Harry.He@xxxxxxxxxxxxx>
- Re: Memoy Leaks in RPM; Version, rpm-4.6.0
- From: Creative Innovative <innovative_c@xxxxxxxxx>
- Re: Memoy Leaks in RPM; Version, rpm-4.6.0
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Memoy Leaks in RPM; Version, rpm-4.6.0
- From: Creative Innovative <innovative_c@xxxxxxxxx>
- Re: RPM library function for SLES 10Sp2
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- RPM library function for SLES 10Sp2
- From: shruthi srinivasalu <shruthisrinivasalu@xxxxxxxxxxx>
- RE: %post and sub packages
- From: "Jason Pyeron" <jpyeron@xxxxxxxx>
- Re: %post and sub packages
- From: Jos Vos <jos@xxxxxx>
- RE: %post and sub packages
- From: "Jason Pyeron" <jpyeron@xxxxxxxx>
- %post and sub packages
- From: "Jason Pyeron" <jpyeron@xxxxxxxx>
- SFWrpm on Solaris 10 is not able to relocate to new dir
- From: "Ravi Desai" <Ravi.Desai@xxxxxxxxxxxxxx>
- Qs regarding rpmReadPackageFile, using rpm 4.6 version
- From: Creative Innovative <innovative_c@xxxxxxxxx>
- rpm 4.6 version, --addsign doesnt seem to work
- From: Creative Innovative <innovative_c@xxxxxxxxx>
- Discussion of %posttrans scriptlets and rpm transactions
- From: "Shawn Starr" <sstarr@xxxxxxxxxxxx>
- Re: rpm -qf questions
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- rpm -qf questions
- From: Tan <tan.dalat@xxxxxxxxx>
- Re: Building rpm, x86_64 and i386 architecture, rpm --upgrade
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Re: Building rpm, x86_64 and i386 architecture, rpm --upgrade
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Building rpm, x86_64 and i386 architecture, rpm --upgrade
- From: Mikolaj Kucharski <mikolaj@xxxxxxxxxxxxxx>
- Re: Qs on RPM Rollbacks
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Better way to this ?? Query database to xml
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Re: Better way to this ?? Query database to xml
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Better way to this ?? Query database to xml
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Re: Qs on RPM Rollbacks
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Qs on RPM Rollbacks
- From: Creative Innovative <innovative_c@xxxxxxxxx>
- Re: Unable to open /usr/lib/rpm/rpmrc for reading
- From: Anurag Bhandari <anurag.bhd@xxxxxxxxx>
- Re: Unable to open /usr/lib/rpm/rpmrc for reading
- From: James Antill <james@xxxxxxxxxxxxxxxxx>
- Unable to open /usr/lib/rpm/rpmrc for reading
- From: Anurag Bhandari <anurag.bhd@xxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Looking for documentation on rpm macros and some suggestions
- From: Ritesh Sood <baralachala@xxxxxxxxx>
- Re: Create Binary RPM from ZIP-File
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- upgrade and downgrade scripts
- From: John Gardiner Myers <jgmyers@xxxxxxxxxxxxxx>
- broken link in the wiki
- From: Felix Schwarz <felix.schwarz@xxxxxx>
- How can I examine build script?
- From: Larry Dickson <ldickson@xxxxxxxxxxxx>
- Create Binary RPM from ZIP-File
- From: Fred_aus_Sacka@xxxxxx
- Re: remove the specific dependencie
- From: Jorge Pereira <jpereiran@xxxxxxxxx>
- remove the specific dependencie
- From: Jorge Pereira <jpereiran@xxxxxxxxx>
- Re: odd package conflict behavior
- From: Florian Festi <ffesti@xxxxxxxxxx>
- odd package conflict behavior
- From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
- Re: or condition at BuildRequires
- From: yersinia <yersinia.spiros@xxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: Derek Atkins <warlord@xxxxxxx>
- What the best way for verify if host is valid for install rpm?
- From: Jorge Pereira <jpereiran@xxxxxxxxx>
- Re: or condition at BuildRequires
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: or condition at BuildRequires
- From: Marten Lehmann <lehmann@xxxxxx>
- Re: or condition at BuildRequires
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: or condition at BuildRequires
- From: Marten Lehmann <lehmann@xxxxxx>
- Re: or condition at BuildRequires
- From: Florian Festi <ffesti@xxxxxxxxxx>
- or condition at BuildRequires
- From: Marten Lehmann <lehmann@xxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: Jorge Pereira <jpereiran@xxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: Derek Atkins <warlord@xxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: Jos Vos <jos@xxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: Derek Atkins <warlord@xxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Create a RPM package that install other RPM package!
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Create a RPM package that install other RPM package!
- From: Jorge Pereira <jpereiran@xxxxxxxxx>
- Re: rpm behavior at install
- Re: Defines for detecting build OS?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Defines for detecting build OS?
- From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
- Re: Defines for detecting build OS?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Defines for detecting build OS?
- From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
- Re: rpm behavior at install
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Defines for detecting build OS?
- From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
- Re: Defines for detecting build OS?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Defines for detecting build OS?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Defines for detecting build OS?
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: Defines for detecting build OS?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- rpm behavior at install
- Defines for detecting build OS?
- From: Matthew Pounsett <matt@xxxxxxxxxxxxx>
- Re: how to tst the "erase " functionality of an rpm
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: how to tst the "erase " functionality of an rpm
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: how to tst the "erase " functionality of an rpm
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- how to tst the "erase " functionality of an rpm
- From: "Jennis Pruett" <jennyp@xxxxxxxx>
- Install RPM into HPUX Servers
- From: "Lo Mike - michlo" <Mike.Lo@xxxxxxxxxx>
- Re: question about package conflicts
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: question about package conflicts
- From: Florian Festi <ffesti@xxxxxxxxxx>
- RE: question about package conflicts
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- RE: question about package conflicts
- From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
- Re: First ever rpm, how are files extracted from the rpm and where do they go?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Re: First ever rpm, how are files extracted from the rpm and where do they go?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: First ever rpm, how are files extracted from the rpm and where do they go?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- Feature Highlight: Noarch Subpackages
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: First ever rpm, how are files extracted from the rpm and where do they go?
- From: Paul Johnson <pauljohn32@xxxxxxxxx>
- First ever rpm, how are files extracted from the rpm and where do they go?
- From: Ignacio Valdes <ivaldes@xxxxxxxxxx>
- RE: question about package conflicts
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- RE: question about package conflicts
- From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
- Re: question about package conflicts
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: question about package conflicts
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- question about package conflicts
- From: "Dave Peterson" <dave_peterson@xxxxxxxxxx>
- RE: Unsatisfied dependency of library included in package
- From: Panu Matilainen <pmatilai@xxxxxxxxxx>
- RE: Unsatisfied dependency of library included in package
- From: "Ho-Kuo Chan" <HChan@xxxxxxxxxxx>
- Re: Unsatisfied dependency of library included in package
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: What is $releasever
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: What is $releasever
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- Re: What is $releasever
- From: Jos Vos <jos@xxxxxx>
- What is $releasever
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- Unsatisfied dependency of library included in package
- From: "Ho-Kuo Chan" <HChan@xxxxxxxxxxx>
- Re: Changing the %Setup Macro
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- [PATCH] Typo in comment of header-py.c
- From: Masatake YAMATO <yamato@xxxxxxxxxx>
- Changing the %Setup Macro
- From: "Eric Aiken" <eric.aiken@xxxxxx>
- Re: rpm.spec in rpm-4.4.2.3
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
- From: "Alexander 'Leo' Bergolth" <leo@xxxxxxxxxxxxxxxxxxxx>
- Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- rpm.spec in rpm-4.4.2.3
- From: Chris Osborn <fozztexx@xxxxxxxxxxxx>
- Re: installing an rpm from another rpm's %post script
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: dist-upgrade: usage of rpm in pre-/postinstall scripts
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- Re: What does "%if 0%{?..." mean
- From: Jeff Johnson <n3npq@xxxxxxx>
- Dependency fail for libjvm.so
- From: "Shaer, Ofira" <OShaer@xxxxxxx>
- Re: Keeping tar permissions when building an rpm.
- From: Florian Festi <ffesti@xxxxxxxxxx>
- dist-upgrade: usage of rpm in pre-/postinstall scripts
- From: "Alexander 'Leo' Bergolth" <leo@xxxxxxxxxxxxxxxxxxxx>
- Re: installing an rpm from another rpm's %post script
- From: Don Harper <duck@xxxxxxxxxxxx>
- Keeping tar permissions when building an rpm.
- From: "Jennis Pruett" <jennyp@xxxxxxxx>
- creating a python 2.5.4 rpm
- From: Daniel Bahena <daniel.bahena@xxxxxxxxx>
- Re: installing an rpm from another rpm's %post script
- From: Derek Atkins <warlord@xxxxxxx>
- Re: installing an rpm from another rpm's %post script
- From: Florian Festi <ffesti@xxxxxxxxxx>
- installing an rpm from another rpm's %post script
- From: Derek Atkins <warlord@xxxxxxx>
- Re: Preventing the striping of symbols when packaging pre-existing binaries [ WAS: Re: how to disable rpmbuild from stripping the debug information from binaries?]
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Preventing the striping of symbols when packaging pre-existing binaries [ WAS: Re: how to disable rpmbuild from stripping the debug information from binaries?]
- From: Dotan Barak <dotanba@xxxxxxxxx>
- Preventing the striping of symbols when packaging pre-existing binaries [ WAS: Re: how to disable rpmbuild from stripping the debug information from binaries?]
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: how to disable rpmbuild from stripping the debug information from binaries?
- From: Dotan Barak <dotanba@xxxxxxxxx>
- Re: spec file documentation
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: spec file documentation
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- Re: spec file documentation
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- spec file documentation
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- Re: how to disable rpmbuild from stripping the debug information from binaries?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- how to disable rpmbuild from stripping the debug information from binaries?
- From: Dotan Barak <dotanba@xxxxxxxxx>
- Re: What does "%if 0%{?..." mean
- From: Jos Vos <jos@xxxxxx>
- Re: What does "%if 0%{?..." mean
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- Re: What does "%if 0%{?..." mean
- From: Jos Vos <jos@xxxxxx>
- What does "%if 0%{?..." mean
- From: Jonathan Ryshpan <jonrysh@xxxxxxxxxxx>
- How to version RPM's
- From: Tracy Reed <treed@xxxxxxxxxxxxxxx>
- Re: Unsatisfied dependencies
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Unsatisfied dependencies
- From: "Zhang, Long (Roger)" <zhangl@xxxxxxxxxxxxxxxxxx>
- Re: A couple basic binary RPM questions
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- RE: Why are my binary files going into the bin/ folder
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Why are my binary files going into the bin/ folder
- From: "Paul Johnson" <pauljohn32@xxxxxxxxx>
- RE: Why are my binary files going into the bin/ folder
- From: "Paul Krauss" <pkrauss@xxxxxxxxxxxx>
- Re: Why are my binary files going into the bin/ folder
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Why are my binary files going into the bin/ folder
- From: "Paul Krauss" <pkrauss@xxxxxxxxxxxx>
- Re: A couple basic binary RPM questions
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- A couple basic binary RPM questions
- From: "Paul Krauss" <pkrauss@xxxxxxxxxxxx>
- RE: machine `x86_64-redhat' not recognized
- From: "J Santos" <jsantos5954@xxxxxxxxx>
- RE: machine `x86_64-redhat' not recognized
- From: seth vidal <skvidal@xxxxxxxxxxxxxxxxx>
- RE: machine `x86_64-redhat' not recognized
- From: "J Santos" <jsantos5954@xxxxxxxxx>
- Re: machine `x86_64-redhat' not recognized
- From: Dotan Barak <dotanba@xxxxxxxxx>
- machine `x86_64-redhat' not recognized
- From: "J Santos" <jsantos5954@xxxxxxxxx>
- Re: How to add a python script to an RPM in the right way?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: How to add a python script to an RPM in the right way?
- From: "Dotan Barak" <dotanba@xxxxxxxxx>
- Re: How to add a python script to an RPM in the right way?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: How to add a python script to an RPM in the right way?
- From: "Dotan Barak" <dotanba@xxxxxxxxx>
- Re: How to add a python script to an RPM in the right way?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- How to add a python script to an RPM in the right way?
- From: "Dotan Barak" <dotanba@xxxxxxxxx>
- Re: EVR comparison and how to sort them?
- From: Jos Vos <jos@xxxxxx>
- Re: EVR comparison and how to sort them?
- From: Farkas Levente <lfarkas@xxxxxxxxxxx>
- Re: EVR comparison and how to sort them?
- From: Jos Vos <jos@xxxxxx>
- EVR comparison and how to sort them?
- From: Farkas Levente <lfarkas@xxxxxxxxxxx>
- Re: Moderation test
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: Moderation test
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: rpm question
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: Moderation test
- From: Florian Festi <ffesti@xxxxxxxxxx>
- Re: rpm question
- From: Tim Born <timborn@xxxxxxxxxxxxx>
- Re: Moderation test
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: Moderation test
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: Is there is a way to verify an installed RPM from python?
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: Moderation test
- From: Panu Matilainen <pmatilai@xxxxxxxxxx>
- Moderation test
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: Is there is a way to verify an installed RPM from python?
- From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: Moderation test
- From: devzero2000 <devzero2000@xxxxxxxx>
- Re: Is there is a way to verify an installed RPM from python?
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Is there is a way to verify an installed RPM from python?
- From: "Dotan Barak" <dotanba@xxxxxxxxx>
- Re: rpm question
- From: "Paul Johnson" <pauljohn32@xxxxxxxxx>
- Re: rpm question
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: rpm question
- From: Michael Barto <mbarto@xxxxxxxxxxxxx>
- rpm question
- From: John Frazier <jfrazierjr9@xxxxxxxxxxx>
- Re: Problem about upgrade multiple rpm package.
- From: qiuhd <qiuhd@xxxxxxxxxxxx>
- Re: php-xml-5.2.6 rpm
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Problem about upgrade multiple rpm package.
- From: devzero2000 <devzero2000@xxxxxxxx>
- Re: php-xml-5.2.6 rpm
- From: Pascal Brognez <pascal.brognez@xxxxxxxxxxxxxx>
- Problem about upgrade multiple rpm package.
- From: qiuhd <qiuhd@xxxxxxxxxxxx>
- Re: php-xml-5.2.6 rpm
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: php-xml-5.2.6 rpm
- From: Pascal Brognez <pascal.brognez@xxxxxxxxxxxxxx>
- Re: php-xml-5.2.6 rpm
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- php-xml-5.2.6 rpm
- From: Pascal Brognez <pascal.brognez@xxxxxxxxxxxxxx>
- Re: trying to unpack multiple sources
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: trying to unpack multiple sources
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: trying to unpack multiple sources
- From: Jeff Johnson <n3npq@xxxxxxx>
- Re: trying to unpack multiple sources
- From: Jos Vos <jos@xxxxxx>
- Re: trying to unpack multiple sources
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: trying to unpack multiple sources
- From: Jos Vos <jos@xxxxxx>
- Re: trying to unpack multiple sources
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: trying to unpack multiple sources
- From: Jos Vos <jos@xxxxxx>
- trying to unpack multiple sources
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Segmentation fault when try run rpm to install init.d scripts
- From: Jeff Johnson <n3npq@xxxxxxx>
- Segmentation fault when try run rpm to install init.d scripts
- From: bpathakis@xxxxxxxxxxx
- Re: Segmentation fault when try run rpm to install init.d scripts
- From: Jeff Johnson <n3npq@xxxxxxx>
- Segmentation fault when try run rpm to install init.d scripts
- From: bpathakis@xxxxxxxxxxx
- Re: remove an installed rpm during rpm -i
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- RE: find-requires doesn't seem to run during rpmbuild
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: find-requires doesn't seem to run during build
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: yersinia <yersinia.spiros@xxxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: Tim Born <timborn@xxxxxxxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: devzero2000 <pinto.elia@xxxxxxxxx>
- RE: find-requires doesn't seem to run during rpmbuild
- From: Chris Burel <chrisburel@xxxxxxxxx>
- Re: Buildroot being ignored
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: Buildroot being ignored
- From: devzero2000 <devzero2000@xxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Re: Buildroot being ignored
- From: Panu Matilainen <pmatilai@xxxxxxxxxxxxxxx>
- Building rpm, x86_64 and i386 architecture, rpm --upgrade
- From: Mikolaj Kucharski <mikolaj@xxxxxxxxxxxxxx>
- Buildroot being ignored
- From: "Xavier Toth" <txtoth@xxxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: remove an installed rpm during rpm -i
- From: devzero2000 <devzero2000@xxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: Michael Barto <mbarto@xxxxxxxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: Seth Vidal <skvidal@xxxxxxxxxxxxxxxxx>
- Re: remove an installed rpm during rpm -i
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- remove an installed rpm during rpm -i
- From: Barry R Cisna <brcisna@xxxxxxxxxxxxx>
- find-requires doesn't seem to run during build
- From: "Chris Burel" <chrisburel@xxxxxxxxx>
- Re:Is there is any way to non root user can able to install rpm
- From: 赵俊岭 <zhaojunling_2000@xxxxxxx>
- Is there is any way to non root user can able to install rpm
- From: "Velusamy, Baskar" <Baskar.Velusamy@xxxxxxxxxxx>
- Is there is any wat to non root user can able to install rpm ?
- From: "Velusamy, Baskar" <Baskar.Velusamy@xxxxxxxxxxx>
- Frustration making an RPM package
- From: mbarto at logiqwest.com (Michael Barto)
- Frustration making an RPM package
- From: job317 at mailvault.com (Job 317)
- Frustration making an RPM package
- From: job317 at mailvault.com (Job 317)
- Frustration making an RPM package
- From: Greg_Swift at aotx.uscourts.gov (Greg_Swift at aotx.uscourts.gov)
- Frustration making an RPM package
- From: job317 at mailvault.com (Job 317)
- How can I change the target of an RPM install?
- From: MrUmunhum at popdial.com (William Estrada)
- Frustration making an RPM package
- From: Greg_Swift at aotx.uscourts.gov (Greg_Swift at aotx.uscourts.gov)
- How can I change the target of an RPM install?
- From: devzero2000 at rpm5.org (devzero2000)
- rpm says missing lib but it's already rpm installed
- From: devzero2000 at rpm5.org (devzero2000)
- rpm says missing lib but it's already rpm installed
- From: martin.koller at etm.at (Martin Koller)
- How can I change the target of an RPM install?
- From: MrUmunhum at popdial.com (William Estrada)
- How do I install an entire directory under /var with rpm
- From: Greg_Swift at aotx.uscourts.gov (Greg_Swift at aotx.uscourts.gov)
- How do I install an entire directory under /var with rpm
- From: mbarto at logiqwest.com (Michael Barto)
- How do I install an entire directory under /var with rpm
- From: Greg_Swift at aotx.uscourts.gov (Greg_Swift at aotx.uscourts.gov)
- How do I install an entire directory under /var with rpm
- From: mbarto at logiqwest.com (Michael Barto)
- How do I install an entire directory under /var with rpm
- From: Greg_Swift at aotx.uscourts.gov (Greg_Swift at aotx.uscourts.gov)
- How do I install an entire directory under /var with rpm
- From: mbarto at logiqwest.com (Michael Barto)
- The installation of openldap fails.
- From: pascal.brognez at univ-lille1.fr (Pascal Brognez)
- Changing user at install time
- From: general at cartersanders.com (Carter Sanders)
- Rebuild RPM with .rpm and .spec
- From: richardj112 at gmail.com (Richard J)
- I *need* a way to ignore dependencies in my rpm spec file.
- From: mpeters at mac.com (Michael A. Peters)
- I *need* a way to ignore dependencies in my rpm spec file.
- From: pmatilai at laiskiainen.org (Panu Matilainen)
- Issues while packaging java app with rpmbuild...
- From: pmatilai at laiskiainen.org (Panu Matilainen)
- Rebuild RPM with .rpm and .spec
- From: devzero2000 at rpm5.org (devzero2000)
- Rebuild RPM with .rpm and .spec
- From: valery_reznic at yahoo.com (Valery Reznic)
- Rebuild RPM with .rpm and .spec
- From: richardj112 at gmail.com (Richard J)
- I *need* a way to ignore dependencies in my rpm spec file.
- From: jennyp at lanl.gov (Jennis Pruett)
- Issues while packaging java app with rpmbuild...
- From: ann_basso1 at yahoo.com (Ann Basso)
- Attention: rpm-list moves
- From: Panu Matilainen <pmatilai@xxxxxxxxxx>
- Re: Spec file question
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- Spec file question
- From: "Frost, Jere" <jere.frost@xxxxxx>
- Leaving a file behind
- From: R P Herrold <herrold@xxxxxxxxxxxx>
- Re: rpmbuild questions
- From: "Dave Pawson" <dave.pawson@xxxxxxxxx>
- Re: rpmbuild questions
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- rpmbuild questions
- From: "Dave Pawson" <dave.pawson@xxxxxxxxx>
- Re: Leaving a file behind
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Leaving a file behind
- From: R P Herrold <herrold@xxxxxxxxxxxx>
- Leaving a file behind
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- RE: signing RPMs without a passphrase?
- From: "Wichmann, Mats D" <mats.d.wichmann@xxxxxxxxx>
- Re: signing RPMs without a passphrase?
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- Re: signing RPMs without a passphrase?
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- Re: signing RPMs without a passphrase?
- From: Lev Lvovsky <lists2@xxxxxxxxxx>
- Re: signing RPMs without a passphrase?
- From: Lev Lvovsky <lists2@xxxxxxxxxx>
- RE: signing RPMs without a passphrase?
- From: "Jay Yarbrough" <jyarbrough@xxxxxxxxxxx>
- Re: signing RPMs without a passphrase?
- From: Lev Lvovsky <lists2@xxxxxxxxxx>
- Re:
- From: Per Arnold Blaasmo <Per-Arnold.Blaasmo@xxxxxxxxx>
- Re: signing RPMs without a passphrase?
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- RE: signing RPMs without a passphrase?
- From: "Aaron Hanson" <a.hanson@xxxxxx>
- signing RPMs without a passphrase?
- From: Lev Lvovsky <lists2@xxxxxxxxxx>
- Re: Issues when updating running apps?
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Re: Issues when updating running apps?
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Re: Issues when updating running apps?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Issues when updating running apps?
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Peter Wang will be out of office from Sep 29 to Oct 5, urgent contact 13911309718
- From: Feng Li Wang <wangfl@xxxxxxxxxx>
- Re: which installation path for your local application (Was Re: Files listed twice question)
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Re: which installation path for your local application (Was Re: Files listed twice question)
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Chinnakka K Batakurki is out of the office.
- From: Chinnakka K Batakurki <chinnakka.batakurki@xxxxxxxxxx>
- Re: which installation path for your local application (Was Re: Files listed twice question)
- From: Adrian Marques <amarques@xxxxxxxxxxxxx>
- which installation path for your local application (Was Re: Files listed twice question)
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Files listed twice question
- From: Adrian Marques <amarques@xxxxxxxxxxxxx>
- Re: Didactic spec file suggestions?
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Re: Files listed twice question
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Issues when updating running apps?
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Re: Files listed twice question
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Re: Files listed twice question
- From: Tim Mooney <mooney@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: Files listed twice question
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Didactic spec file suggestions?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Re: Files listed twice question
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Didactic spec file suggestions?
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- Re: Files listed twice question
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Files listed twice question
- From: Adrián Márques <amarques@xxxxxxxxxxxxx>
- 'gpg-pubkeys out of the rpmdb'
- From: R P Herrold <herrold@xxxxxxxxxxxx>
- Re: Dependencies on other hosts in a distributed application?
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- RE: Dependencies on other hosts in a distributed application?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- RE: Dependencies on other hosts in a distributed application?
- From: "Jason Pyeron" <jpyeron@xxxxxxxx>
- Re: Dependencies on other hosts in a distributed application?
- From: Greg_Swift@xxxxxxxxxxxxxxxxx
- Dependencies on other hosts in a distributed application?
- From: Mike Meyer <mwm-keyword-rpm.43b295@xxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Toralf Lund <toralf@xxxxxxxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Jeff Johnson <n3npq.jbj@xxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: "Michael A. Peters" <mpeters@xxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Toralf Lund <toralf@xxxxxxxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Toralf Lund <toralf@xxxxxxxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Toralf Lund <toralf@xxxxxxxxxxxxxx>
- Re: Dependency problem when "post" runs command from the rpm
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Dependency problem when "post" runs command from the rpm
- From: Toralf Lund <toralf@xxxxxxxxxxxxxx>
- Re: File listed twice
- From: Mikael Fridh <mikael.fridh@xxxxxxxxx>
- RE: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: File listed twice
- From: Mikael Fridh <mikael.fridh@xxxxxxxxx>
- RE: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: File listed twice
- From: Bob Proulx <bob@xxxxxxxxxx>
- RE: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- RE: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: File listed twice
- From: Michael Jennings <mej@xxxxxxxxx>
- RE: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: File listed twice
- From: Valery Reznic <valery_reznic@xxxxxxxxx>
- Re: File listed twice
- From: "Stanley, Jon" <Jon.Stanley@xxxxxxxxxx>
- Re: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: File listed twice
- From: Bob Proulx <bob@xxxxxxxxxx>
- Re: File listed twice
- From: "Stanley, Jon" <Jon.Stanley@xxxxxxxxxx>
- File listed twice
- From: "Jeffrey Sherwin" <jeff@xxxxxxxxxxxx>
- Re: Installing MySQL via RPM on RHEL4 glibc errors
- From: Josh <serjosh@xxxxxxxxx>
- Re: Installing MySQL via RPM on RHEL4 glibc errors
- From: Jos Vos <jos@xxxxxx>
- Installing MySQL via RPM on RHEL4 glibc errors
- From: Josh <serjosh@xxxxxxxxx>
- Re: env variable is not defined when running rpmbuild --rebuild
- From: "Erez Zilber" <erezzi.list@xxxxxxxxx>
- Re: env variable is not defined when running rpmbuild --rebuild
- From: Bob Proulx <bob@xxxxxxxxxx>
- Re: rpmbuild tries to cd into $RPM_PACKAGE_NAME-$RPM_PACKAGE_VERSION
- From: "Erez Zilber" <erezzi.list@xxxxxxxxx>
- Re: rpmbuild tries to cd into $RPM_PACKAGE_NAME-$RPM_PACKAGE_VERSION
- From: Jos Vos <jos@xxxxxx>