| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
Bill Thanks for your reply. I have never had sound after I migrated to RH8.0.The other configurations have been due to me trying to get sound to work. Further exploration shows that :- a. The directory /dev/synth mentioned in the dmesg does not appear to exist. b. Reading through the Red Hat Linux 8 Bible which I have just received shows some device directories for audio programs. Apparently, /dev/sndstat has the status of the sound drivers. In my case, this has, "no such device" c. Likewise, the /dev/audio, /dev/audio1, /dev/dsp, /dev/dsp1, /dev/mixer, /dev/mixer1, /dev/sequencer and /dev/midi00 all have the "no such device" in their directories. What do I do next? Regards Roger On Mon, 2002-12-02 at 07:35, Bill Nottingham wrote: > Roger Harrington (linuxmail@xxxxxxxxxxxxxxxxxxx) said: > > I am using a Yamaha OPL3-SAx soundcard but have absolutely zero sound > > with RH8.0 It worked with RH7.2 > > > > The kernel sees the card during bootup as shown in dmesg: - > > isapnp: Scanning for PnP cards... > > isapnp: Card 'OPL3-SA3 Sound Board' > > isapnp: 1 Plug & Play card detected total > > speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) > > What happens at this point if you just try to play sounds (ignoring > all the other configuration you tried... it *should* just work at > this point.) > > Bill > > > > _______________________________________________ > Sound-list mailing list > Sound-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/sound-list