Re: Display can not change from "800X600" to "1024X 768" on RedHat 9.0 | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
i meant the memory capacity of your graphics card .. . :-)
-ionut-
__________________
have you checked the size of your graphics card ?
the resolution depends on this as well
btw, your XF86Config looks ok.
what laptop do you have ? you might also check linux-on-laptops.com
you can find lots of configuration files for different laptops .. :-)
regards,
-ionut-
suhaimi@xxxxxxxxxxx
y To:
shrike-list@xxxxxxxxxx, redhat-install-list@xxxxxxxxxx,
redhat-list@xxxxxxxxxx
Sent by: cc:
shrike-list-bounces Subject: Display can not
change from "800X600" to "1024X 768" on RedHat 9.0
@redhat.com
05/18/2004 06:57 PM
Please respond to
shrike-list
Hi All,
Sorry about this dump question. Can some body advice me on how to change
my laptop Display Resolution from "800X600" to "1024X768"on RedHat 9.0.
I have try to change it but there is no effect still "800X600" display.
Below is my hardware configuration that detect on my WinXP laptop..
Display Adapter : Intel(R) 82852/82855 GM/GME Graphics Controller
DPI setting : 96
Monitor Type : Digital Flat Panel(1024x768)
Below is my XFree configuration files that I have. Can some body help
me. I want to move from WinXP to RedHat Linux.
If the display cannot change I will not have the fun on surfing the net
and do my daily work.
Really appreciate your help
Regards,
Suhaimi
My XF86Conf file:
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of
the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Generic 8514 Compatible, 1024x768 @ 87 Hz
interlaced (no 800x600)"
DisplaySize 284 213
HorizSync 31.5 - 31.5
HorizSync 35.5 - 35.5
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 852"
VideoRam 16384
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
--
Shrike-list mailing list
Shrike-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/shrike-list
This communication is for informational purposes only. It is not intended
as
an offer or solicitation for the purchase or sale of any financial
instrument
or as an official confirmation of any transaction. All market prices, data
and other information are not warranted as to completeness or accuracy and
are subject to change without notice. Any comments or statements made
herein
do not necessarily reflect those of J.P. Morgan Chase & Co., its
subsidiaries and affiliates.
--
Shrike-list mailing list
Shrike-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/shrike-list
This communication is for informational purposes only. It is not intended as
an offer or solicitation for the purchase or sale of any financial instrument
or as an official confirmation of any transaction. All market prices, data
and other information are not warranted as to completeness or accuracy and
are subject to change without notice. Any comments or statements made herein
do not necessarily reflect those of J.P. Morgan Chase & Co., its
subsidiaries and affiliates.
--
Shrike-list mailing list
Shrike-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/shrike-list
[Home] [Kernel List] [Red Hat Install] [Red Hat Watch List] [Red Hat Development] [Red Hat Phoebe Beta] [Yosemite Forum] [Fedora Discussion] [Gimp] [Yosemite News]