Re: Adaptec AHA2940UW and kernel 2.6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



--- Arindam Dey <adey@xxxxxxxxxx> wrote:
> On Wed, 2003-07-23 at 16:52, mick mearns wrote:
> > Hello list;
> >  I have the above SCSI controller.
> > I downloaded the 2.6 source and installed it.
> > It compiles fine under RH9.
> > The 2.6 failure is in the make initrd for the AIC7xxx
> > 
> > My method:
> > 'cd /usr/src/*2.6*'
> > 'make mrpoper'
> > I copied my working RH9 .config and used 
> > 'make menuconfig'
> > I tried making everything scsi with no modules, and with all
> modules.
> > Then 'make bzImage modules modules_install install'
> > 
> > I get an initrd error 'error AIC7xxx no module:'
> > I am on a different machine right now and don't have the full error
> > display.
> > I do have a /initrd directory.
> 
> Have u done this in make menuconfig?
> 
> SCSI device support ---> SCSI low-level drivers ---> Adaptec AIC7xxx
> 		                                     Fast -> U160(New 						    
> Driver)  
> 
> Have you built it in the kernel <*> or made a module out of this <M>
> ?
> 
> ls /lib/modules/2.6.0-test1/kernel/drivers/scsi/aic7xxx/ what is the
> output of this ? Does it list aic7xxx.o ?
> 
> I am currently compiling and having another adaptec card which also
> uses
> the same module I was interested.
> 
> 
> -- 
> Arindam Dey
> 

Hello;
  I am back on the 'broken' 2.6 machine tonight.

depmod: *** Unresolved symbols in
/lib/modules/2.6.0-test1/kernel/sound/synth/snd-util-mem.ko
depmod:         snd_kcalloc
Kernel: arch/i386/boot/bzImage is ready
sh arch/i386/boot/install.sh 2.6.0-test1 arch/i386/boot/bzImage
System.map ""
No module aic7xxx found for kernel 2.6.0-test1
mkinitrd failed
make[1]: *** [install] Error 1
make: *** [install] Error 2


[root@xxxxxx linux-2.6.0-test1]# ls drivers/scsi/
<snip>
aic7xxx      <dir>
aic7xxx_old
aic7xxx_old.c
aic7xxx_old.ko
aic7xxx_old.mod.c
aic7xxx_old.mod.o
aic7xxx_old.o


[root@xxxxxx linux-2.6.0-test1]# ls drivers/scsi/aic7xxx/*.o
drivers/scsi/aic7xxx/aic7770.o       
drivers/scsi/aic7xxx/aic7xxx_osm.o
drivers/scsi/aic7xxx/aic7770_osm.o   
drivers/scsi/aic7xxx/aic7xxx_osm_pci.o
drivers/scsi/aic7xxx/aic7xxx_93cx6.o 
drivers/scsi/aic7xxx/aic7xxx_pci.o
drivers/scsi/aic7xxx/aic7xxx_core.o  
drivers/scsi/aic7xxx/aic7xxx_proc.o
drivers/scsi/aic7xxx/aic7xxx.mod.o   
drivers/scsi/aic7xxx/aic7xxx_reg_print.o
drivers/scsi/aic7xxx/aic7xxx.o        drivers/scsi/aic7xxx/built-in.o

[mick@xxxxxx mick]$
I noticed that the aic7xxx.o module was in a seperate aic7xxxx
directory.
So:

[root@xxxxxx scsi] su -
[root@xxxxxx scsi]# cd /usr/src/*2.6*/drivers/scsi
[root@xxxxxx scsi]# cp aic7xxx/aic7xxx.o .
[root@xxxxxx scsi]# cd ..
[root@xxxxxx drivers]# cd ..
[root@xxxxxx linux-2.6.0-test1]# make install
make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.
  CHK     include/linux/compile.h
./scripts/pnmtologo -t vga16 -n logo_linux_vga16 -o
drivers/video/logo/logo_linux_vga16.c
drivers/video/logo/logo_linux_vga16.ppm
  CC      drivers/video/logo/logo_linux_vga16.o
./scripts/pnmtologo -t clut224 -n logo_linux_clut224 -o
drivers/video/logo/logo_linux_clut224.c
drivers/video/logo/logo_linux_clut224.ppm
  CC      drivers/video/logo/logo_linux_clut224.o
  LD      drivers/video/logo/built-in.o
  LD      drivers/video/built-in.o
  LD      drivers/built-in.o
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux
  AS      arch/i386/boot/setup.o
  LD      arch/i386/boot/setup
  OBJCOPY arch/i386/boot/compressed/vmlinux.bin
  GZIP    arch/i386/boot/compressed/vmlinux.bin.gz
  LD      arch/i386/boot/compressed/piggy.o
  LD      arch/i386/boot/compressed/vmlinux
  OBJCOPY arch/i386/boot/vmlinux.bin
  BUILD   arch/i386/boot/bzImage
Root device is (22, 1)
Boot sector 512 bytes.
Setup is 4783 bytes.
System is 984 kB
Kernel: arch/i386/boot/bzImage is ready
sh arch/i386/boot/install.sh 2.6.0-test1 arch/i386/boot/bzImage
System.map ""
No module aic7xxx found for kernel 2.6.0-test1
mkinitrd failed
make[1]: *** [install] Error 1
make: *** [install] Error 2
[root@xxxxxx linux-2.6.0-test1]#

Any help is welcome.

Mick M.



__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com


-- 
Shrike-list mailing list
Shrike-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/shrike-list

[Index of Archives]     [Fedora Users]     [Centos Users]     [Kernel Development]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat Phoebe Beta]     [Yosemite Forum]     [Fedora Discussion]     [Gimp]     [Stuff]     [Yosemite News]

  Powered by Linux