Google
  Web www.spinics.net

Re: can't get PCMCIA working?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


I compiled a stock kernel and now yenta loads fine, although still
complains about IRQs.

On Fri, 2003-04-11 at 22:56, Gregory Gulik wrote:
> 
> Ok, I tried this.  I copied the /etc/pcmcia/config from a Dell laptop 
> running RH 7.3 to this Toshiba running RH 9 and when I restarted the 
> PCMCIA service I got:
> 
> [root@xxxxxxxxxxx pcmcia]# service pcmcia stop
> Shutting down PCMCIA services: done.
> [root@xxxxxxxxxxx pcmcia]# service pcmcia start
> Starting PCMCIA services: 
> /lib/modules/2.4.20-9/kernel/drivers/pcmcia/yenta_socket.o: init_module: 
> No such device
> Hint: insmod errors can be caused by incorrect module parameters, 
> including invalid IO or IRQ parameters.
>        You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20-9/kernel/drivers/pcmcia/yenta_socket.o: insmod 
> /lib/modules/2.4.20-9/kernel/drivers/pcmcia/yenta_socket.o failed
> /lib/modules/2.4.20-9/kernel/drivers/pcmcia/yenta_socket.o: insmod 
> yenta_socket failed
> [root@xxxxxxxxxxx pcmcia]#
> 
> Then I checked dmesg and saw a bunch of these:
> 
> PCI: No IRQ known for interrupt pin A of device 02:04.0. Please try 
> using pci=biosirq.
> PCI: No IRQ known for interrupt pin B of device 02:04.1. Please try 
> using pci=biosirq.
> PCI: No IRQ known for interrupt pin A of device 02:04.0. Please try 
> using pci=biosirq.
> PCI: No IRQ known for interrupt pin B of device 02:04.1. Please try 
> using pci=biosirq.
> PCI: No IRQ known for interrupt pin A of device 02:04.0. Please try 
> using pci=biosirq.
> PCI: No IRQ known for interrupt pin B of device 02:04.1. Please try 
> using pci=biosirq.
> 
> 
> 
> Audioslave - 7M3 - Live wrote:
> > To get my ethernet card to work, on my 490CDT Toshiba Laptop. I had to 
> > pull the /etc/pcmcia/config off of a previous 7.3 installation and 
> > replace the version in 8.0. - I got some errors with the 8.0 and it 
> > never worked without bringing it up from 7.3 to 8.0 before.
> > 
> > I saved the file to a floppy. Then did a fresh install of RH 8.0. It 
> > didn't boot with the 8.0 version of pcmcia. But taking the copy of my 
> > 7.3 configuration file yielded a working connection to the Internet.
> > 
> > Something seems to be wrong with the changes to the file. I have no 
> > idea. But carrying around the cinfig file from upgrade to upgrade seems 
> > to be what I need to do.
> > 
> > I used to have to run modprobe pcnet_cs in my /etc/rc.d/rc.local file 
> > for RH 7.3. I didn't have to run modeprobe in the rc.local file with the 
> > clean install of RH8.0.
> > 
> > Oh well, maybe some day, it will be fixed.
> > 
> > Good luck,
> 
> -- 
> Greg Gulik                                 http://www.gulik.org/greg/
> greg@xxxxxxxxx                             http://www.drivingevents.com/
> 
> 
> 
> 
> -- 
> Shrike-list mailing list
> Shrike-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/shrike-list






[Fedora Users]     [Centos Users]     [Kernel Development]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat Phoebe Beta]     [Yosemite Forum]     [Fedora Discussion]     [Gimp]     [Stuff]     [Yosemite News]

Powered by Linux