Re: Using Nautilus burn .. failed

[Audioslave - 7M3 - Live <creed7m3live@xxxxxxxxxxxxxxx>]

Aaron Matteson wrote:
> I was having this same problem when cdrecord2 came out, what i needed to
> do to rectify this was to compile ide-cd and ide-scsi as modules and load
> them from rc.local eg. "modprobe ide-cd" and /n "modprobe ide-scsi" and
> everything worked fine, with cdrecord2 you no longer need to specify
> "hdx=ide-scsi" in your kernel parms. 
>
> Hopefully this will point you in the proper direction.
>
> These 2.5K bytes were from Audioslave - 7M3 - Live,

Thanks for the pointers. I'll take out the hdd=ide-scsi from grub and 
see what happens to the fstab, symlinks, etc.

Not needing the ide-scsi explains the designation of my reader as an 
scsi device. I hope that the burn:/// program gets the right 
information, once the change is made.

I hope that compiling the modules, then loading them through modprobe 
and adding them to /etc/rc.d/rc.local is not needed. I have added 
modprobe loads for other problems before. It was ethernet card related, 
for the pcnet_cs module. It is a great thing to have. It lets the other 
processes do what they want, then you can set them to the desired value.

"OK, OK ... are you done playing. The right value is ...."

Jim

--
A good reputation is more valuable than money.
		-- Publilius Syrus