| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
The current XFree86 in rawhide has many improvements over what
shipped in RHL 9, including bug fixes, updated drivers, libGL
optimizations and many other things. While binary rpms generated
from the src.rpm are generally only runtime compatible with the
version of the OS that they were compiled for, I've went to
rather great lengths to keep the XFree86.spec file compatible
with Red Hat Linux 8.0 and above, and I will attempt to continue
keeping the spec file compatible with 8.0 and later releases as
long as I can sanely do so without having maintenance hell.
In order to make it easier for people to use XFree86 4.3.0 in
whatever Red Hat Linux release or beta they're using, I've made
it easy to recompile the src.rpm for these releases by defining
new spec file defines at the top of the spec file which can be
set to choose which OS version to build for. If you look at the
top of XFree86.spec after installing the src.rpm, you will find:
%define build_maintainer_mode %( hostname -f |grep -q capslock.lan && echo 1 || echo 0)
%if ! %{build_maintainer_mode}
# These 4 build target defines are currently not all implemented, only the
# build_taroon target is implemented. As time permits I will be making the
# other ones work properly also, to aide people in rebuilding XFree86 4.3.0
# for Red Hat Linux 8.0, 9, cambridge, and taroon.
%define build_taroon 0
%define build_cambridge 1
# Red Hat Linux 9 (Shrike)
%define build_shrike 0
# Red Hat Linux 8.0 (Psyche)
%define build_psyche 0
%else
# This section is reserved exclusively for mharris, do not change
it.
%define build_taroon 0
%define build_cambridge 0
%define build_shrike 0
%define build_psyche 1
%endif
The build_maintainer_mode basically is used to autodetect
one of my own personal systems which I use to do throwaway
build tests. Ignore that. Under the first commented area, set
one of the 4 build target options to 1, and the rest to 0. The
default rawhide src.rpm defaults to building for cambridge, so if
you're building for RHL 9 or 8.0, set shrike or psyche to 1
instead.
It is rather important if you rebuild XFree86 from my src.rpms
that you modify the "Release:" field for your own benefit by
adding ".custom" or ".yourname" or something to it. That allows
you to know which of our builds that yours is based on, and also
allows you to be able to upgrade to new releases in the future,
be they mine or your own. If I were to be rebuilding it for
myself for example, I would change release "30" to "30.mh.1" and
rebuild.
Rebuilding in Red Hat Linux 9 should work without anything
special. There should be no other rawhide dependancies needed
that I can think of. Anything that is rawhide specific in the
build is specially wrapped with build_cambridge and/or
build_taroon everywhere to keep src.rpm compatibility as high as
possible.
Rebuilding in Red Hat Linux 8.0 however will require some extra
effort. For 8.0, you will need to download the src.rpm packages
from Red Hat Linux 9 for expat, freetype, fontconfig, and
possibly other things I've forgotten long ago. You'll need to
rebuild those first and install them, then rebuild XFree86 4.3.0.
If it needs anything else it'll complain and you can download the
RHL 9 src.rpms of those items and rebuild them too first.
You'll need to also compile your own XFree86 4.3.0 kernel DRM
modules if you use 4.3.0 in Red Hat Linux 8.0, as the RHL 8.0
kernel is not compatible DRM with 4.3.0.
Note: I've made it possible to rebuild X in this manner purely
as a convenience to the community. Red Hat does not support user
recompiled software packages, only official Red Hat supplied
binary packages. Do not file bugs in bugzilla against XFree86 if
you're using your own XFree86 builds, unless you can test my own
binary builds from rawhide on a Severn beta system that has been
updated to current rawhide, or if the bug is so obvious that it's
definitely going to affect all builds no matter what, such as a
missing BuildRequires or somesuch.
Feel free to discuss any problems you encounter here, and I will
attempt to answer anything tha comes up. I'll also add more
comments to the spec file to make it more self documenting if
people have confusion or problems recompiling.
Enjoy.
--
Mike A. Harris ftp://people.redhat.com/mharris
OS Systems Engineer - XFree86 maintainer - Red Hat
_______________________________________________
xfree86-list mailing list
xfree86-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/xfree86-list
IRC: #xfree86 on irc.redhat.com
[Home] [Red Hat General] [Red Hat Watch List] [Red Hat Development] [Kernel List] [Hot Springs] [Yosemite News]