Re: FC6 update trying to boot FC5 | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
> On Mon, 2007-02-26 at 05:36 -0800, Harold Hallikainen wrote: >> > On Sun, Feb 25, 2007 at 12:28:55PM -0800, Harold Hallikainen wrote: >> >> >> >> > On Sat, Feb 24, 2007 at 02:14:29PM -0800, Harold Hallikainen wrote: >> >> >> I just did an update from FC5 to FC6 on my laptop, but the machine >> is >> >> >> trying to boot FC5, which it can't find. How do I fix that? >> >> > >> >> > Not sure, but try this oft-repeated mantra (yeah, I need to put it >> >> > into the FAQ): >> >> > >> >> > Boot to rescue mode with your FC6 Disk 1. (At the boot: prompt, >> >> > put "linux rescue".) Let it mount your Linux installation when it >> >> > finds it. Then >> >> > >> >> > chroot /mnt/sysimage >> >> > grub-install /dev/hda # or whatever your boot drive is >> >> > exit >> >> > exit >> >> > >> >> > Yeah, exit twice - once from the chroot shell and once from rescue. >> >> > Pop out the cd and the normal grub stuff should come up when it >> >> > reboots. >> >> > >> >> > >> >> >> >> Hmmm. That didn't work. But, my Ghost For Linux backup got me back >> >> working >> >> with FC5. I sure like having such a backup! >> >> >> >> I suspect the problem is that various yum updates have filled my >> /boot >> >> partition, so the FC6 updated could not put anything more there. >> Here's >> >> a >> >> look at /boot and df ... >> >> >> >> [root@hhlaptop boot]# ls -al >> >> total 93350 >> >> drwxr-xr-x 4 root root 1024 Feb 25 11:59 . >> >> drwxr-xr-x 24 root root 4096 Feb 25 11:55 .. >> >> -rw-r--r-- 1 root root 58952 Jun 23 2006 >> config-2.6.17-1.2139_FC5 >> >> -rw-r--r-- 1 root root 62875 Nov 10 10:41 >> config-2.6.18-1.2239.fc5 >> >> drwxr-xr-x 2 root root 1024 Nov 15 20:54 grub >> >> -rw-r--r-- 1 root root 87666688 Jul 2 2006 image.img.gz >> > >> > Umm, what's that doing in there. I'd say punt that and try again. >> > >> >> -rw-r--r-- 1 root root 1808129 Jun 30 2006 >> >> initrd-2.6.17-1.2139_FC5.img >> >> -rw-r--r-- 1 root root 1413120 Nov 15 20:56 >> >> initrd-2.6.18-1.2239.fc5.img >> >> drwx------ 2 root root 12288 Jun 29 2006 lost+found >> >> -rw-r--r-- 1 root root 1078172 Jun 23 2006 >> >> System.map-2.6.17-1.2139_FC5 >> >> -rw-r--r-- 1 root root 1118384 Nov 10 10:41 >> >> System.map-2.6.18-1.2239.fc5 >> >> -rw-r--r-- 1 root root 1967671 Nov 10 10:41 >> vmlinuz-2.6.18-1.2239.fc5 >> >> [root@hhlaptop boot]# df >> >> Filesystem 1K-blocks Used Available Use% Mounted on >> >> /dev/mapper/VolGroup00-LogVol00 >> >> 93448028 29311576 59313004 34% / >> >> /dev/hda1 101086 99184 0 100% /boot >> >> tmpfs 253852 0 253852 0% /dev/shm >> >> [root@hhlaptop boot]# >> >> >> >> >> >> I suspect I could get rid of everything that's 2.6.17* and still have >> >> the >> >> system work, freeing up some space. What's image.img.gz? It's pretty >> >> big! >> >> Nothing in the grub directory is very big... >> >> >> >> I went with the default partitions on the original install of FC5, >> which >> >> is why, I suspect, I ran out of room on boot. >> >> >> >> So... Should I be ok deleting all the 2.6.17 stuff? How about >> >> image.img.gz? >> >> >> >> >> Well, I tried deleting the 2.6.17 stuff and image.img.gz, which did >> clear >> out a lot of space in /boot. I then did another update attempt with >> FC6_64. Same result! When booting, I get the menu that lets you choose >> which version you're going to load. The only version listed is an FC5. >> Selecting that gives a file not found error. > > The odds are that your /boot got filled up, so the /boot/grub/grub.conf > file couldn't be updated and you were stuck with only the FC5 > options. Then you deleted the FC5 kernels and blooey! > > How to get around it? > > 1. Boot off the first FC6 CD in rescue mode and let it mount the > existing system as /mnt/sysimage. > > 2. Enter "chroot /mnt/sysimage" > > 3. Make sure /boot has adequate room for the new kernel. Also make sure > /lib has enough space (remember, the modules go there). > > 4. Figure out where the CD is mounted. Odds are it's /mnt/cdrom, but it > could vary. > > 5. Run: > > rpm -ivh --force /mnt/cdrom/Fedora/RPMS/(KERNEL-NAME) > > Replace "(KERNEL-NAME)" with one of the following: > > kernel-2.6.18-1.2798.fc6.i586.rpm (Intel 586) > kernel-2.6.18-1.2798.fc6.i686.rpm (Intel 686, 32-bit) > kernel-PAE-2.6.18-1.2798.fc6.i686.rpm (Intel Xeon with PAE support) > kernel-xen-2.6.18-1.2798.fc6.i686.rpm (Xenified 32-bit) > kernel-2.6.18-1.2798.fc6.x86_64.rpm (AMD Opteron/Athlon 64, 64-bit) > kernel-xen-2.6.18-1.2798.fc6.x86_64.rpm (Xenified 64-bit) > > depending on what processor and kernel you want. > > 6. Verify that the /boot/grub/grub.conf file has the correct entries > in it. You should see a stanza like: > > title Fedora Core (2.6.18-1.2798.fc6) > root (hd0,0) > kernel /boot/vmlinuz-2.6.18-1.2798.fc6 ro root=LABEL=/ rhgb > quiet max_luns=256 > initrd /boot/initrd-2.6.18-1.2798.fc6.img > > 7. If everything appears OK, enter "exit" twice (once to exit the > chroot, one to reboot the system), pop the CD out and boot the system. > >> I probably need to update that menu, but it SEEMS the FC6 update should >> take care of it. > > Not if "/boot" filled up. > >> This is an update from FC5_64. I've gone ahead and put >> FC5 from my g4l backup back on the machine for now. Ideas as to what I >> should try next? After this machine, I want to try updating my FC4 >> server >> to FC6... > > Always remember that upgrades require more disk space than a raw > install. Before doing upgrades, make sure there's plenty of space > in /boot and / (the root partition). > > ---------------------------------------------------------------------- > - Rick Stevens, Principal Engineer rstevens@xxxxxxxxxxxxxxx - As a follow-up to this, I removed this file from /boot: -rw-r--r-- 1 root root 87666688 Jul 2 2006 image.img.gz This dropped usage in /boot from 100% down to 19%. The upgrade to FC6 then went smoothly. However, I noticed during bootup that the wlan did not come up. The message said ndiswrapper could not be found. Later, through the network manager, I was able to bring up the network. A while later, though, I could not bring up the wlan. I don't know if I changed something and messed it up or what. So, to get me going again, I loaded my FC5 image back and all works again. I'll try the upgrade again next weekend. I understand the kernel now includes a provision for driving Broadcom wifi chip sets directly (with fwcutter), so I may give that a try. Anyway, getting rid of the img file in /boot allowed the upgrade to work. THANKS! Harold -- FCC Rules Updated Daily at http://www.hallikainen.com - Advertising opportunities available! _______________________________________________ Redhat-install-list mailing list Redhat-install-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/redhat-install-list To Unsubscribe Go To ABOVE URL or send a message to: redhat-install-list-request@xxxxxxxxxx Subject: unsubscribe
[Home] [Fedora Users] [Red Hat General] [Red Hat Watch List] [Red Hat Development] [Samba List] [Kernel List] [Kernel Newbies] [Hot Springs] [Yosemite News]