| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
Hi, I am using canon printer and it is working fine with my Redhat linux 7.3 system. It prints both text and postscript files without any error. Now I try to print from other target board containing DiskOnChip. I have copied all printer related files to diskonchip. (lpd,lpr,...,usr/share/printconf, usr/share/ghostscript, usr/share/foomatic, /usr/bin/gs, ...). I copied /usr/lib/Omni/libomni.so, /usr/lib/Omni/libCanon_BJ*.so to my target board. With that board, the printer is working fine if I configure "Text only Printer" in printconf-tui. But it is not working with Canon BJ F200 Omni driver with the board. The details are: In Target board, with "printconf-tui", first I chose "text Only Printer" as follows. /usr/bin/printconf-tui I created a new queue with name "text" I chose "Text Only Printer" in "Queue driver" option. It created the queue with following details: Type : Local Printer Device Device : /dev/lp0 Driver : Text Only Driver Then I printed using lpr -Ptext /etc/printcap. The file was printed correctly. Next I created a Queue with name "Canon" I chose " Canon -> BJ F200 -> Omni " in Queue driver option. It created the queue with following details: Type : Local Printer Device Device : /dev/lp0 Driver : Canon BJ F200 Driver Then I tried with lpr -PCanon /etc/printcap. But the printer is not at all responding. And I am also not getting any error message. What is wrong in the configuration? Please help. Thanks, vijaibaskar _______________________________________________ Redhat-devel-list mailing list Redhat-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/redhat-devel-list