| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
When I run compile and link helloworld.c on my RH 8.0 machine, this is
what I get:
$ gcc -v helloworld.c -o helloworld
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.2/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --host=i386-redhat-linux --with-system-zlib --enable-__cxa_atexit
Thread model: posix
gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)
/usr/lib/gcc-lib/i386-redhat-linux/3.2/cc1 -lang-c -v -D__GNUC__=3 -D__GNUC_MINOR__=2 -D__GNUC_PATCHLEVEL__=0 -D__GXX_ABI_VERSION=102 -D__ELF__ -Dunix -D__gnu_linux__ -Dlinux -D__ELF__ -D__unix__ -D__gnu_linux__ -D__linux__ -D__unix -D__linux -Asystem=posix -D__NO_INLINE__ -D__STDC_HOSTED__=1 -Acpu=i386 -Amachine=i386 -Di386 -D__i386 -D__i386__ -D__tune_i386__ helloworld.c -quiet -dumpbase helloworld.c -version -o /tmp/ccOaH7je.s
GNU CPP version 3.2 20020903 (Red Hat Linux 8.0 3.2-7) (cpplib) (i386 Linux/ELF)
GNU C version 3.2 20020903 (Red Hat Linux 8.0 3.2-7) (i386-redhat-linux)
compiled by GNU C version 3.2 20020903 (Red Hat Linux 8.0 3.2-7).
ignoring nonexistent directory "/usr/i386-redhat-linux/include"
#include "..." search starts here:
#include <...> search starts here:
/usr/local/include
/usr/lib/gcc-lib/i386-redhat-linux/3.2/include
/usr/include
End of search list.
as -V -Qy -o /tmp/ccueXHiS.o /tmp/ccOaH7je.s
GNU assembler version 2.13.90.0.2 (i386-redhat-linux) using BFD version 2.13.90.0.2 20020802
/usr/lib/gcc-lib/i386-redhat-linux/3.2/collect2 --eh-frame-hdr -m elf_i386 -dynamic-linker /lib/ld-linux.so.2 -o helloworld /usr/lib/gcc-lib/i386-redhat-linux/3.2/../../../crt1.o /usr/lib/gcc-lib/i386-redhat-linux/3.2/../../../crti.o /usr/lib/gcc-lib/i386-redhat-linux/3.2/crtbegin.o -L/usr/lib/gcc-lib/i386-redhat-linux/3.2 -L/usr/lib/gcc-lib/i386-redhat-linux/3.2/../../.. /tmp/ccueXHiS.o -lgcc -lgcc_eh -lc -lgcc -lgcc_eh /usr/lib/gcc-lib/i386-redhat-linux/3.2/crtend.o /usr/lib/gcc-lib/i386-redhat-linux/3.2/../../../crtn.o
Perhaps this will help you isolate your problem. You should also verify
that all the relevant RPM packages are properly installed:
$ rpm -V `rpm -qa | fgrep gcc` glibc-2.2.93-5 binutils-2.13.90.0.2-2
--- Vladimir
------------------------------------------------------------------------
Vladimir G. Ivanovic http://leonora.org/~vladimir
2770 Cowper St. vladimir@acm.org
Palo Alto, CA 94306-2447 +1 650 678 8014
The lyfe so short, the craft so long to learne. -- Chaucer
I>>>>> "ik" == ilkka karasalo <ilkka.karasalo@foi.se> writes:
> just installed RH8.0 (Psyche) on a PC,
> and tried out compiling some code with the
> 'gcc' and 'g77' compilers (in /usr/bin/gcc
> and /usr/bin/g77).
> Compiling works OK, however linking the code with
> either 'gcc' or 'g77' fails with the message
> collect2: cannot find ld
> The linker/loader executable is /usr/bin/ld,
> and I have made sure that /usr/bin is in PATH.
> Linking explicitly with /usr/bin/ld does produce
> an executable binary, which however aborts
> immediately at start-up.
> Help on this problem is most welcome.
> Ilkka Karasalo
> FOI, Hydroacoustics KTH, MWL
> Enkopingsvagen 126 Teknikringen 8
> SE-172 90 Stockholm SE-100 44 Stockholm
> Phone: +46-8-55503627 Phone: +46-8-7908017
> Fax: +46-8-55503869 Fax: +46-8-7906122
> Email: ilkka.karasalo@foi.se Email: ilkkak@fkt.kth.se
> _______________________________________________
> Redhat-devel-list mailing list
> Redhat-devel-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/redhat-devel-list
_______________________________________________
Redhat-devel-list mailing list
Redhat-devel-list@redhat.com
https://listman.redhat.com/mailman/listinfo/redhat-devel-list