Re: MD on raw device, use unallocated space anyway?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10 January 2014 20:10, Wilson Jonathan <piercing_male@xxxxxxxxxxx> wrote:
>
> In that case the answer would be no. However if fail/remove the 3TB
> drive, then partitioned the drive as 2TB and 1TB and then added the 2TB
> partition back into the array then you can use the 1TB on its own...
> just as long the "2TB" partition is the same size as the 2TB drives (or
> slightly bigger) then it should all work nicely.
>
>

Thanks, that confirms my suspicions. I wanted to avoid this (as a
rebuild would be required) but it's the only way, I suppose. Unless I
upgrade to 3TB all around and gain some storage.

Cheers,
Mathias
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux