Re: md raid6 not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On Tue, 21 Aug 2012 11:17:57 +0000 "Vanhorn, Mike"
<michael.vanhorn@xxxxxxxxxx> wrote:

> Thank you for your response. Here is the output you requested.
> >What is the result of:
> >
> >  mdadm -S /dev/md0
> # mdadm -S /dev/md0
> mdadm: stopped /dev/md0
> #
> >  mdadm -Avvv /dev/md0
> # mdadm -Avvv /dev/md0
> mdadm: looking for devices for /dev/md0
> mdadm: cannot open device /dev/sdi1: Device or resource busy
> mdadm: /dev/sdi1 has no superblock - assembly aborted
> #

So /dev/sdi1 is busy.  You need to find out why.  (the "no superblock"
message is a bit misleading... I might have fixed that in newer mdadm, I'm
not sure).

The "/proc/mdstat" that you showed in the original email had sdi1 as a member
of md0, so it clearly wasn't being used by anything else then.
"mdadm -S /dev/md0" would have removed it from md0 so it shouldn't have been
The fact that it is busy is very odd.

A device can be busy if:
 - it is mounted as a filesystem
 - it is active as swap
 - it is part of an md array
 - it is part of a dm device
 - probably something else, but those are the main ones.


Attachment: signature.asc
Description: PGP signature

[ATA RAID]     [Linux SCSI Target Infrastructure]     [Managing RAID on Linux]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device-Mapper]     [Kernel]     [Linux Books]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]     [Linux Networking]

Add to Google Powered by Linux