|
|
|
Re: [patch 01/10 v3] raid5: use wake_up_all for overlap waking | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
|
On Mon, 25 Jun 2012 15:24:48 +0800 Shaohua Li <shli@xxxxxxxxxx> wrote:
> It's possible several tasks are waiting for stripe overlap. We clear R5_Overlap
> bit and wake_up, but wake_up just wakes one task. So if there are several tasks
> in the wait queue, some tasks will not be woken up even its strip R5_Overlap
> clear. The end result is tasks hang in make_request.
>
> wake_up_all should not introduce performance issue here, since overlap case is
> rare.
This is not necessary.
wake_up_all is only different from wake_up if WQ_FLAG_EXCLUSIVE it set, e.g.
by prepare_to_wait_exclusive.
As we don't use an exclusive wait to wait on wait_for_overlap, there is no
point in using wake_up_all, wake_up already wakes everything up.
NeilBrown
>
> Signed-off-by: Shaohua Li <shli@xxxxxxxxxxxx>
> ---
> drivers/md/raid5.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> Index: linux/drivers/md/raid5.c
> ===================================================================
> --- linux.orig/drivers/md/raid5.c 2012-06-19 08:11:10.021688417 +0800
> +++ linux/drivers/md/raid5.c 2012-06-19 08:11:29.833439339 +0800
> @@ -1399,7 +1399,7 @@ static void __raid_run_ops(struct stripe
> for (i = disks; i--; ) {
> struct r5dev *dev = &sh->dev[i];
> if (test_and_clear_bit(R5_Overlap, &dev->flags))
> - wake_up(&sh->raid_conf->wait_for_overlap);
> + wake_up_all(&sh->raid_conf->wait_for_overlap);
> }
> put_cpu();
> }
> @@ -2436,7 +2436,7 @@ handle_failed_stripe(struct r5conf *conf
> }
>
> if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
>
> while (bi && bi->bi_sector <
> sh->dev[i].sector + STRIPE_SECTORS) {
> @@ -2474,7 +2474,7 @@ handle_failed_stripe(struct r5conf *conf
> bi = sh->dev[i].toread;
> sh->dev[i].toread = NULL;
> if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> if (bi) s->to_read--;
> while (bi && bi->bi_sector <
> sh->dev[i].sector + STRIPE_SECTORS) {
> @@ -3572,7 +3572,7 @@ static void handle_stripe(struct stripe_
> } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
> clear_bit(STRIPE_EXPAND_READY, &sh->state);
> atomic_dec(&conf->reshape_stripes);
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> md_done_sync(conf->mddev, STRIPE_SECTORS, 1);
> }
>
> @@ -4249,7 +4249,7 @@ static sector_t reshape_request(struct m
> spin_lock_irq(&conf->device_lock);
> conf->reshape_safe = mddev->reshape_position;
> spin_unlock_irq(&conf->device_lock);
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> sysfs_notify(&mddev->kobj, NULL, "sync_completed");
> }
>
> @@ -4340,7 +4340,7 @@ static sector_t reshape_request(struct m
> spin_lock_irq(&conf->device_lock);
> conf->reshape_safe = mddev->reshape_position;
> spin_unlock_irq(&conf->device_lock);
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> sysfs_notify(&mddev->kobj, NULL, "sync_completed");
> }
> return reshape_sectors;
> @@ -5718,7 +5718,7 @@ static void end_reshape(struct r5conf *c
> smp_wmb();
> conf->reshape_progress = MaxSector;
> spin_unlock_irq(&conf->device_lock);
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
>
> /* read-ahead size must cover two whole stripes, which is
> * 2 * (datadisks) * chunksize where 'n' is the number of raid devices
> @@ -5776,7 +5776,7 @@ static void raid5_quiesce(struct mddev *
>
> switch(state) {
> case 2: /* resume for a suspend */
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> break;
>
> case 1: /* stop all writes */
> @@ -5792,14 +5792,14 @@ static void raid5_quiesce(struct mddev *
> conf->quiesce = 1;
> spin_unlock_irq(&conf->device_lock);
> /* allow reshape to continue */
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> break;
>
> case 0: /* re-enable writes */
> spin_lock_irq(&conf->device_lock);
> conf->quiesce = 0;
> wake_up(&conf->wait_for_stripe);
> - wake_up(&conf->wait_for_overlap);
> + wake_up_all(&conf->wait_for_overlap);
> spin_unlock_irq(&conf->device_lock);
> break;
> }
Attachment:
signature.asc
Description: PGP signature
![]() |
![]() |