Re: Data Offset

[freeone3000 <freeone3000@xxxxxxxxx>]

Thanks a lot for your help. I have my data back! Played a few movie
files off of the mounted drive, and they all worked perfect. Sorry for
being such a dunce with the block sizes.

`/dev/sdc3:2048s /dev/sdb3:2048s /dev/sde:2048s /dev/sdd3:1024s
missing` mounted the drive successfully. Now, is there a way to
"normalize" my drives so I can mount it without running through this
guesswork again? Or that I can re-create my array using a standard
mdadm?

On Wed, Jun 13, 2012 at 1:49 PM, Piergiorgio Sartor
<piergiorgio.sartor@xxxxxxxx> wrote:
>
> Hi all,
>
> On Wed, Jun 13, 2012 at 08:22:02PM +0200, Pierre Beck wrote:
> > I wonder if LVM activation can be done without writing to the array?
> > IIRC it updates at least some timestamp ...
>
> we tried setting the array itself read only,
> which prevent (or it should) anybody above,
> filesystem or LVM, to perform writes...
>
> Neveretheless, the result was a bit "strange",
> namely a kernel BUG() or similar, we had to
> reset the PC.
>
> I'm not sure if this was caused by other issue,
> since the PC was in a not really healty state,
> or a direct consequence of md device in r/o.
>
> bye,
>
> --
>
> piergiorgio
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html




--
James Moore
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html