Re: raid10 issues after reorder of boot drives.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


I am not sure how to proceed now with the output that shows possible
pairs as it won't allow me to setup all 8 devices on the array but only
4. Should I run the array creation with -x4 and set the available spare
devicesor or just create the array as I can remember which was one pair
from each controller. i.e /dev/sda3 /dev/sde3 ...?
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[ATA RAID]     [Linux SCSI Target Infrastructure]     [Managing RAID on Linux]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device-Mapper]     [Kernel]     [Linux Books]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]     [Linux Networking]

Add to Google Powered by Linux