Re: [PATCH] imsm: fix: rebuild does not continue after reboot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Fri, 20 Apr 2012 13:45:02 +0200 Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
wrote:

> If system is rebooted during rebuild, md driver changes sync_action
> from 'recover' to 'idle' (during stopping all md devices).
> If mdmon is still running then, it detects the change of sync_action state,
> finishes rebuild and writes metadata to disks. After computer's restart
> the RAID volume is in Normal state in OROM and rebuild seems to be finished.
> After system's start-up RAID volume is in auto-read-only state
> and metadata is in Dirty state. Rebuild seems to be finished but it is not.
> Data is inconsistent (out-of-sync).
> 
> When mdmon detects the change of sync_action from 'recover' to 'idle',
> it has to check if rebuild is really finished. Appropriate test was added.
> Now mdmon examines each volume's member if it is being rebuilt.
> 
> Signed-off-by: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
> ---
>  super-intel.c |   17 +++++++++++++++++
>  1 files changed, 17 insertions(+), 0 deletions(-)
> 
> diff --git a/super-intel.c b/super-intel.c
> index e405d97..1ad5e47 100644
> --- a/super-intel.c
> +++ b/super-intel.c
> @@ -7273,6 +7273,8 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
>  	struct imsm_dev *dev = get_imsm_dev(super, inst);
>  	struct imsm_map *map = get_imsm_map(dev, MAP_0);
>  	struct imsm_disk *disk;
> +	struct mdinfo *mdi;
> +	int recovery_not_finished = 0;
>  	int failed;
>  	__u32 ord;
>  	__u8 map_state;
> @@ -7313,6 +7315,21 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
>  		dprintf("normal: ");
>  		if (is_rebuilding(dev)) {
>  			dprintf("while rebuilding");
> +			/* check if recovery is really finished */
> +			for (mdi = a->info.devs; mdi ; mdi = mdi->next)
> +				if (mdi->recovery_start != MaxSector) {
> +					recovery_not_finished = 1;
> +					break;
> +				}
> +			if (recovery_not_finished) {
> +				dprintf("\nimsm: Rebuild has not finished yet, "
> +						"state not changed");
> +				if (a->last_checkpoint < mdi->recovery_start) {
> +					a->last_checkpoint = mdi->recovery_start;
> +					super->updates_pending++;
> +				}
> +				break;
> +			}
>  			end_migration(dev, super, map_state);
>  			map = get_imsm_map(dev, MAP_0);
>  			map->failed_disk_num = ~0;


Applied, thanks.

NeilBrown

Attachment: signature.asc
Description: PGP signature


[ATA RAID]     [Linux SCSI Target Infrastructure]     [Managing RAID on Linux]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device-Mapper]     [Kernel]     [Linux Books]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]     [Linux Networking]

Add to Google Powered by Linux