Re: [patch v2 0/6] Add TRIM support for raid linear/0/1/10

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


2012/3/20 Shaohua Li <shli@xxxxxxxxxx>:
> 2012/3/20 Holger Kiehl <Holger.Kiehl@xxxxxx>:
>> Hello,
>>
>>
>> On Tue, 20 Mar 2012, Shaohua Li wrote:
>>
>>> 2012/3/20 Holger Kiehl <Holger.Kiehl@xxxxxx>:
>>>>
>>>> Hello,
>>>>
>>>>
>>>> On Fri, 16 Mar 2012, Shaohua Li wrote:
>>>>
>>>>> The patches add TRIM support for raid linear/0/1/10. I'll add TRIM
>>>>> support
>>>>> for
>>>>> raid 4/5/6 later. The implementation is pretty straightforward and
>>>>> self-explained.
>>>>>
>>>>> v1->v2:
>>>>> 1. fixed a checking issue
>>>>> 2. dropped discard request plug and replace it with no discard merege,
>>>>> because
>>>>> current SCSI layer can't handle discard request merge.
>>>>>
>>>> Have tested TRIM patches on three different systems with the following
>>>> hardware/ setup:
>>>>
>>>>   1) root mounted on a raid1 over two SAS SSD's (200GB) and /home
>>>> partition
>>>>      on a raid0 over a fusionio ioDrive Duo. Is very new and seen very
>>>>      little usage.
>>>>
>>>>   2) root and /home mounted on a raid0 over two Intel X25 Postville
>>>>      (160GB) connected to a Intel P55 Express chipset. Has seen very
>>>>      heavy usage for approx. 2 years.
>>>>
>>>>   3) root and /home mounted on a raid0 over three OCZ-VERTEX2 (120GB)
>>>>      connected via ICH7 south bridge. Has seen mild usage for approx.
>>>>      1.5 years.
>>>>
>>>> Made the following observations when running my own benchmark which
>>>> copies around a lot of small files and deletes them. The benchmark on
>>>> all systems was always run only on the /home partition ie. on a raid0.
>>>>
>>>> For system 1) there is hardly any measurable differnce whether discard
>>>> is enabled or not (~29000 files per second).
>>>>
>>>> On system 2) the performance drops from 6500->3700 files per second,
>>>> but under normal usage one does not notice any difference.
>>>
>>> do you have the blktrace data when the benchmark is running, especially
>>> when doing file deletion. I'd like to check the latency of discard in this
>>> case.
>>>
>> It is uploaded on ftp://ftp.dwd.de/pub/afd/test/trim
> Thanks, I'll check it.
Thanks for the testing. The trace data is very helpful. In the intel
SSD, trace data
shows a discard request uses about 1 ~ 3 ms. The filesystem suffers from
fragmentation too, so lots of small discard requests. When ext4 starts doing
discard, it usually uses more than 1 minutes. That's too bad.
If just looking one disk's trace data, there are some extra latencies between
two discard requests. The combined trace data of two disks show the latency
comes from waiting for another disk, so nothing abnormal. I thought we could
do an optimization for this case in the future.
So in summary, discard from the SSDs is slow. When your filesystem is
fragmented, the performance will be terrible.

Thanks,
Shaohua
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[ATA RAID]     [Linux SCSI Target Infrastructure]     [Managing RAID on Linux]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device-Mapper]     [Kernel]     [Linux Books]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]     [Linux Networking]

Add to Google Powered by Linux