Google
  Web www.spinics.net

Re: Software RAID 6 initial sync very slow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


thomas62186218@xxxxxxx wrote:

My first test was to create a RAID 6 md device, 128K chunk, with all 12 drives. The sync is currently underway at a very slow 30MB/sec, with mdadm estimating this as a 9hr process. With an Adaptec 5805 RAID card tested, I performed the RAID 6 initial sync with the same 12 drives in just under 5 hours. Meanwhile, our total CPU usage during mdadm syncing is at 5%, so there's plenty of CPU not being used.

I have a very similar system, except single quad core and 16 x 750GB

It syncs (md RAID6) in 3:40min which is roughly proportional to the time you see with your hardware RAID sync up, so you should be able to match it with md RAID.

I cannot remember whether stripe_cache_size affected the sync time - currently I have this set to 16384.

Regards,

Richard
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Home]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux]     [Managing RAID on Linux]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device-Mapper]     [Kernel]     [Linux Books]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [Photos]     [Yosemite Photos]     [Yosemite News]     [AMD 64]     [Linux Nework]

Add to Google Powered by Linux