RE: (no subject): should have read--"Regarding thread '"Deleting mdadm RAID arrays'". | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
> -----Original Message----- > > Thanks a lot for the help. I'll try mdadm --stop as soon as syncing has > finished (95% complete now!!!) > Well, sync finished successfully. Mdadm --dtop /dev/md0 # OK Mdadm --zero-superblock --force /dev/sda1 # OK Mdadm --zero-superblock --force /dev/sdb1 # OK These return to prompt without any messages. If I then run them a second time they complain that the device is not part of an array. All well and good. Mdadm --create --verbose /dev/md0 --level=raid1 --raid-devices=2 /dev/sd[ab]1 # NOT OK. Complains "already an array" starts a new resync. Mdadm --stop /dev/md0 # stops resync :) What else is needed? Am I unable to recreate the array on md0? Must I choose a new device such as md1? Or is there another stop to erasing an array? -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
[Home] [ATA RAID] [Linux] [Managing RAID on Linux] [Linux IDE] [Linux SCSI] [Linux Hams] [Device-Mapper] [Kernel] [Linux Books] [Linux Admin] [Linux Net] [GFS] [RPM] [Photos] [Yosemite Photos] [Yosemite News] [AMD 64] [Linux Nework]
|