Re: Mapping physical disk block to logical block to selectively repair w/o forcing rescan | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
David Lethe wrote:
I have the physical disk sector/drive, so I will have to go backwards. That means using compute_blocknr, factoring the chunk size, stripe size, look at the raid5_private_data to get everything else, including whether or not it is in a rebuild, what position the disk has in the stripe, among other things .. and repeat for RAID6. Still all scriptable .. as longas I keep the block calculations in 64-bits when on 32-bit kernel.
Or use "bc" to do really long calculations. It works well with scripts.
The problem I see with this is that using raid1 you can read and entire array end to end and never use one mirror of the data. So unless you perform the 'check' operation you won't really be sure that you have the errors mapped. I suspect that running check fixes more errors than 'repair' on most systems.I can parse mdadm -Q -D to get health and configuration, or get it from sysfs, haven't decided. Now for recovery ... a change was made in 2.6.15 that affects how the /dev/md recalculates & corrects the error, but I don't think I have to worry about it. Just directly read the /dev/md block that corresponds to the faulty physical disk/sector. This should just repair the bad block w/o enticing the md system to fail over the entire disk. Exception would be if the disk with bad block can remap due to a catastrophicfailure, or lack of spare sectors.Even if the bad physical block lands on a parity block in the /dev/md space, it should get rebuilt because it has to read the entire stripe to figure out if there is a parity error, which there will be because one disk will return the sense data indicating an unrecoverable read error, so the md will repair the stripe to keep parity consistent for me.
-- Bill Davidsen <davidsen@xxxxxxx> "Woe unto the statesman who makes war without a reason that will stillbe valid when the war is over..." Otto von Bismark
-- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
[Home] [ATA RAID] [Linux] [Managing RAID on Linux] [Linux IDE] [Linux SCSI] [Linux Hams] [Device-Mapper] [Kernel] [Linux Books] [Linux Admin] [Linux Net] [GFS] [RPM] [Photos] [Yosemite Photos] [Yosemite News] [AMD 64] [Linux Nework]
![]() |