Re: [PATCH] toshiba_acpi: Add support for transflective LCD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Thank you for commenting again!
Please Cc me on the patch, then I'll test your patch.


Seth Forshee wrote:
On Sat, Feb 18, 2012 at 07:04:29AM +0900, Akio Idehara wrote:
Some Toshiba laptops have the transflective LCD and toshset
can control its backlight state.  I brought this feature to the
mainline.  It was tested on a Toshiba Portege R500.

Signed-off-by: Akio Idehara<zbe64533@xxxxxxxxx>

This looks okay in general, although see one comment below.

I've got some patches pending for toshiba_acpi that may conflict with
these a bit, but that should be easy to sort out. However I'm also
working on some backlight changes (currently waiting for test feedback,
as I don't have affected hardware for some of the changes) that are
likely to require some coordination to ensure nothing gets broken. I'll
Cc you on the patch when it's finished so that you can test it.

---
  drivers/platform/x86/toshiba_acpi.c |   43 ++++++++++++++++++++++++++++++++++-
  1 files changed, 42 insertions(+), 1 deletions(-)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index dcdc1f4..af3979c 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -51,6 +51,7 @@
  #include<linux/input.h>
  #include<linux/input/sparse-keymap.h>
  #include<linux/leds.h>
+#include<linux/fb.h>
  #include<linux/slab.h>

  #include<asm/uaccess.h>
@@ -88,6 +89,7 @@ MODULE_LICENSE("GPL");

  /* registers */
  #define HCI_FAN				0x0004
+#define HCI_TR_BACKLIGHT		0x0005
  #define HCI_SYSTEM_EVENT		0x0016
  #define HCI_VIDEO_OUT			0x001c
  #define HCI_HOTKEY_EVENT		0x001e
@@ -122,6 +124,7 @@ struct toshiba_acpi_dev {
  	int video_supported:1;
  	int fan_supported:1;
  	int system_event_supported:1;
+	int tr_backlight_supported:1;

  	struct mutex mutex;
  };
@@ -461,6 +464,22 @@ static const struct rfkill_ops toshiba_rfk_ops = {
  	.poll = bt_rfkill_poll,
  };

+static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, u32 *status)
+{
+	u32 hci_result;
+
+	hci_read1(dev, HCI_TR_BACKLIGHT, status,&hci_result);
+	return hci_result == HCI_SUCCESS ? 0 : -EIO;
+}
+
+static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, int value)
+{
+	u32 hci_result;
+
+	hci_write1(dev, HCI_TR_BACKLIGHT, value,&hci_result);
+	return hci_result == HCI_SUCCESS ? 0 : -EIO;
+}
+
  static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;

  static int get_lcd(struct backlight_device *bd)
@@ -512,8 +531,19 @@ static int set_lcd(struct toshiba_acpi_dev *dev, int value)

  static int set_lcd_status(struct backlight_device *bd)
  {
+	int ret;
  	struct toshiba_acpi_dev *dev = bl_get_data(bd);
-	return set_lcd(dev, bd->props.brightness);
+
+	ret = set_lcd(dev, bd->props.brightness);
+	if (ret)
+		return ret;
+
+	if (dev->tr_backlight_supported) {
+		int value = (bd->props.power == FB_BLANK_UNBLANK) ? 1 : 0;

You probably should also be turning the backlight off when
BL_CORE_FBBLANK is set in bd->props.state.

It looks like it would probably be a good idea to support the
BL_CORE_SUSPENDRESUME option and disable the tr_backlight when
BL_CORE_SUSPEND is set as well.

+		ret = set_tr_backlight_status(dev, value);
+	}
+
+	return ret;
  }

  static ssize_t lcd_proc_write(struct file *file, const char __user *buf,
@@ -938,6 +968,7 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev)
  	const char *hci_method;
  	u32 hci_result;
  	u32 dummy;
+	u32 value;
  	bool bt_present;
  	int ret = 0;
  	struct backlight_properties props;
@@ -984,6 +1015,16 @@ static int __devinit toshiba_acpi_add(struct acpi_device *acpi_dev)
  	}
  	dev->backlight_dev->props.brightness = get_lcd(dev->backlight_dev);

+	/* Determine whether or not BIOS supports transflective backlight */
+	ret = get_tr_backlight_status(dev,&value) ? false : true;
+	dev->tr_backlight_supported = ret;
+	if (ret) {
+		int power = value ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+		dev->backlight_dev->props.power = power;
+	} else {
+		dev->backlight_dev->props.power = FB_BLANK_UNBLANK;
+	}
+
  	/* Register rfkill switch for Bluetooth */
  	if (hci_get_bt_present(dev,&bt_present) == HCI_SUCCESS&&  bt_present) {
  		dev->bt_rfk = rfkill_alloc("Toshiba Bluetooth",
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [XFree86]

Add to Google Powered by Linux