- Subject: login blocked - [/bin/sh: can't access tty; job control turned off]
- From: pcuser p <pcuser.mails@xxxxxxxxx>
- Date: Tue, 17 Jul 2012 17:43:52 +0530
Hi,
Login prompt at the end of kernel bootup is blocked & getting the messasge "/bin/sh: can't access tty; job control turned off"
I've tried with the options in busybox FAQ,nothing worked out.
Details
ls -l /dev/console
crw-rw-rw- 1 root root 204, 64 Dec 31 17:00 /dev/console
ls -l /dev/ttySAC0
crw-rw-rw- 1 root root 204, 64 Dec 31 17:00 /dev/ttySAC0
/etc/inittab:
::sysinit:/etc/init.d/rcS
ttySAC0::respawn:/sbin/getty -L ttySAC0 115200 vt100 # GENERIC_SERIAL
In ::sysinit:/etc/init.d/rcS
i'm doing :
exec /bin/sh
setsid sh -c 'exec sh </dev/ttySAC0 >/dev/ttySAC0 2>&1'
by the completion of /etc/inittabscript,I'm ending in shell prompt with the messsge "/bin/sh: can't access tty; job control turned off"
But I can run all commads from the shell prompt (Except login,if I give system hangs)
I feel the information, I provided may not be very clear,but this is my first time working in linux.
plz suggest a way to get login working.
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
[Newbies FAQ]
[Linux Kernel Development]
[IETF Annouce]
[Git]
[Networking]
[Security]
[Bugtraq]
[Photo]
[Yosemite]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux Networking]
[Linux RAID]
[Linux SCSI]
[Linux ACPI]