Re: SRIOV memory allocation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Is your system 32bit or 64bit? � Before putting the card, there was no memory problem right?

And after putting in the card, memory resources all get used up right (by IOV)? � It looked like it is similar to this problem:

From above and here:

it seemed that this hardware feature requires BIOS support, and so if ur hardware does not have it, SR-IOV is not possible, thus giving rise to those errors u have seen.

On Sat, Apr 7, 2012 at 4:11 PM, J.Hwan Kim <frog1120@xxxxxxxxx> wrote:
Hi, everyone

I'd like to know what routine of the PCIe allocates SR-IOV BAR memory.

When I put into the network card supporting SR-IOV in my system,
it returns error indicating "MMIO resource" is insufficient when sriov
is enabled.

The routine is in iov.c

for (i = 0; i < PCI_SRIOV_NUM_BARS/*6*/; i++) {
� � � � res = dev->resource + PCI_IOV_RESOURCES + i;
� � � � if (res->parent)
� � � � � � nres++;
if (nres != iov->nres) {
� � � dev_err(&dev->dev, "not enough MMIO resources for SR-IOV\n");
� � � return -ENOMEM;

So, I hope to know where the resources of IOV is assigned the parent

Thanks in advance.

Best Regards,
J.Hwan Kim

Kernelnewbies mailing list

Peter Teoh
Kernelnewbies mailing list

[Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Networking]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]

  Powered by Linux