User Mode Linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi All,

I am trying to create a loopback block device under a UML (running
kernel 3.1.0).
I used following commands:

# dd if=/dev/zero of=/tmp/store1 bs=1024 seek=2047 count=1
# losetup /dev/loop1 /tmp/store1

But the 2nd command (i.e. losetup) returns with the error complaining
"/dev/loop1" is not present, but I can see /dev/loop[0..7] files
present.

My question, is it possible to do this exercise under UML (User mode linux)?

Thanks,
Vishal

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies


[Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Networking]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]

Add to Google Powered by Linux