Force routing

[A G <utopian201@xxxxxxxxxxx>]

Hi
I have a bridge setup with an application listening on port 8080. What I want is for the traffic on port 80 to be intercepted by the bridge and sent to my listening application.
I have the following setup:
#setup the bridge
brctl addbr0
brctl addif br0 eth1
brctl addif br0 eth2
ifconfig eth1 0.0.0.0
ifconfig eth2 0.0.0.0
ip link set br0 up

#set the ebtables to force intercept any frame coming in on port 80
ebtables -t broute -A BROUTING -p ipv4 --ip-proto tcp --ip-dport 80 -j redirect --redirect-target DROP

#set iptables to forward this traffic to msy app listening on port 8080
iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 8080 --tproxy-mark 1/1
iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1/1

#once the flows are marked, have them delivered locally via loopback interface
ip rule add fwmark 1/1 table 1
ip route add local 0.0.0.0/0 dev lo table 1

#enable ip packet forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

However nothing is coming into my application. Am I missing anything? My understanding is that the target DROP on the broute BROUTING chain will push it up to be processed by iptables.

Thanks

 		 	   		  --
To unsubscribe from this list: send the line "unsubscribe netfilter" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html