Re: Advice on best way to set up multi-route NAT for lots of IPs
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
On 02/01/2012 13:17, Anton Melser wrote:
you can probably also do this by adding the public IPs to your mailserver?Definitely, makes load shifting very complicated though...
OK, so if you want an external "load balancer" then your problem reduces to *indicating* the desired mapped source address.
If the NAT is on an external box then you can't use fwmarks. You can use either source port or dest port. You could also add all IPs to all servers, but that seems rather tricky to make work in practice. I think your best bet might be a hack, to use dest port as the indicator for "source IP". Set your DNAT to map some range of dest ports to change the source to the IP and the dest port to 25. This will allow all machines to send and masquerade as any source ip...
I haven't quite thought this through, but I think it will work? Good luck Ed W -- To unsubscribe from this list: send the line "unsubscribe netfilter" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html