Re: Cisco VPN Client + Cisco 800 + Firewall

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Anyone ??

> On Thu, Oct 21, 2004 at 08:01:15PM +0100, shore@xxxxxxx wrote:
> > Hi,
> >
> > I don't know how to start, so I'll just start by showing how my network is
> > build:
> >
> >
> > 		Internet
> > 		    |
> > 		    |
> > 		Cisco(800)(dsl modem/router)
> > 		192.168.10.254
> > 		    |
> > 		    |
> > 		192.168.10.1(eth0)
> > 		Firewall
> > 		192.168.0.50(eht1)
> > 		    |
> > 		    |
> > 		LAN 192.168.0.0/24
> >
> >
> > The Cisco is controled by the ISP, so I can't change any configuration on
> it,
> > only if I ask them to. The Firewall is running squid also.
> >
> > The ISP configured the Cisco modem/router to accept VPN connections from
> the
> > internet with Cisco VPN client, and to attribute them a 10.0.0.0/8 range
> ip.
> > The problem is I can't access the LAN from the VPN clients. I'm not an
> iptables
> > master, but i've already searched everywhere for a solution and could't
> find
> > one. Mostly, I think, because I didn't want to get rid of my Firewall
> script,
> > it is doing a nice job so far.
> >
> > Thanks
>
> before i start parsing through 800 lines of firewall script, i gotta ask
> this first--when you connect with the cisco vpn client out on the
> internet--what shows up in the list of "secured routes?"  is it
> 192.168.0.0/24?  is it 0.0.0.0/0.0.0.0?  or is it 192.168.10.0/24?
>
> -j
>
> --
> Jason Opperisano <opie@xxxxxxxxxxx>
>
>







O SAPO já está livre de vírus com a Panda Software, fique você também!
Clique em: http://antivirus.sapo.pt



[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux