Google
  Web www.spinics.net

D945GCLF intel atom board & r8169 ethernet broken in linux-2.6.27-rc5??

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hi

I have an Intel Atom D945GCLF based system. It has a realtek RTL8101E
PCI network interface.

With linux-2.6.27-rc4 - everything seems fine. I think we've been
working OK since 2.6.26ish.

With linux-2.6.27-rc5, "ifconfig eth0" just hangs. lspci -vvx reports,
after loading the driver,

> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E
PCI Express Fast Ethernet controller (rev ff) (prog-if ff)
>       !!! Unknown header type 7f
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  

Before I load the driver lspci -vvx looks OK.

I do not have (much) time to look into this any further but hopefully
this might help someone.

I know there are problems with this device on the atom board
particularly around warm start but thus far I seem to have avoided this
issue.

A cold start in this case does not help.

Lspci.bad comes from -rc5 with the r8169 driver loaded.
Lspci.good comes from -rc4 with the r8169 driver loaded

Cheers

John

Attachment: config
Description: config

Attachment: lspci.bad
Description: lspci.bad

Attachment: lspci.good
Description: lspci.good


[Kernel List]     [Site Home]     [Ethernet Bridging]     [Git]     [IETF Annouce]     [Linux Assembly]     [VLAN]     [Networking]     [Security]     [Bugtraq]     [Rubini]     [Photo]     [Singles Social Netowrking]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Virtualization]     [Linux Security]     [Linux IDE]     [Linux RAID]     [Linux SCSI]     [Linux Wireless]     [DDR & Rambus]     [Free Dating]     [Linux Resources]     [Wireless Reading Device]

Add to Google Powered by Linux