Re: bridge is not forwaring ICMP6 neighbor solicitation to KVM guest

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






----- Original Message -----
> From: "Linus Lüssing" <linus.luessing@xxxxxx>
> To: "Jan Stancek" <jstancek@xxxxxxxxxx>
> Cc: netdev@xxxxxxxxxxxxxxx, "Florian Westphal" <fwestpha@xxxxxxxxxx>, bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
> Sent: Wednesday, 5 March, 2014 3:27:07 PM
> Subject: Re: bridge is not forwaring ICMP6 neighbor solicitation to KVM guest

<snip>

> 
> > I hand-crafted one new packet from malformed one used in previous tests.
> > I modified source address from :: to host B link-scope address and changed
> > dst address from ff02::1 to ff02::1:ffaa:aaaa
> 
> Okay, again according to your capture the guest is receiving the
> MLD query on its interface but does not react with an MLD report.
> 
> Two things I'd like to know:
> 
> Is using the link-scope address as a source and "ff02::1" as the
> destination address for the MLD query work for you?

Yes, I could not trigger it with such query:
http://jan.stancek.eu/tmp/neigh_solicit_and_bridge_traces2/guest_mld_query_ff02_1.cap
  frame 795 -> query
  frame 1040 -> MLD report from guest
  ~20 seconds later
  frame 1507, 1508 -> neigh solicit/advert
  frame 1580, 1581 -> neigh solicit/advert

> 
> Is using the link-scope address as a source and "ff02::1:ff00:29"
> as the destination address for the MLD query "work" for you (do
> we see an MLD report from the guest and keep on seeing neighbor
> solicitations from host B then?).

Yes, this also worked (though I received 2 reports):
http://jan.stancek.eu/tmp/neigh_solicit_and_bridge_traces2/guest_mld_query_ff02_1_ff0029.cap
  frame 446 -> query
  frame 448 -> MLD report from guest
  frame 465 -> MLD report from guest
  frame 689, 690 -> neigh solicit/advert
  frame 760, 761 -> neigh solicit/advert
  ...

Both host and guest were running 3.14.0-rc5 with your sanity check patch.

Regards,
Jan

> 
> For the latter, I don't see anything in particular filtering these
> for a general MLD query wrong destination address in the IPv6
> code from igmp6_event_query() on. But I suspect that the query
> doesn't even get that far on the kernel of the guest, as it is not
> listening on ff02::1:ffaa:aaaa. Therefore the test with
> "ff02::1:ff00:29", an address the guest is listening on, would be
> interesting.
> 
> If that works, then I'm going to make a patch ignore General MLD
> Queries without ff02::1 as their destination address, too.
> 
> 
> Hm, looking at more checks in igmp6_event_query(), I'm currently
> wondering whether we should only enable the snooping behaviour in
> the bridge when receiving a General MLD Query, so one with "::" in
> the multicast field of the MLD message, instead of activating it
> upon a Multicast-Address-Specific Query, too. That'd seem more
> sane to me, I'm going to make a patch for that tomorrow.
> 
> Cheers, Linus
> 
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Discussion]     [TCP Instrumentation]     [Ethernet Bridging]     [Linux Wireless Networking]     [Linux WPAN Networking]     [Linux Host AP]     [Linux WPAN Networking]     [Linux Bluetooth Networking]     [Linux ATH6KL Networking]     [Linux Networking Users]     [Linux Coverity]     [VLAN]     [Git]     [IETF Annouce]     [Linux Assembly]     [Security]     [Bugtraq]     [Yosemite Information]     [MIPS Linux]     [ARM Linux Kernel]     [ARM Linux]     [Linux Virtualization]     [Linux IDE]     [Linux RAID]     [Linux SCSI]