Re: [PATCH] bridge: multicast: add sanity check for query source addresses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 04, 2014 at 10:06:14AM +0100, Hannes Frederic Sowa wrote:
> > diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
> > index ef66365..fb0e36f 100644
> > --- a/net/bridge/br_multicast.c
> > +++ b/net/bridge/br_multicast.c
> > @@ -1235,6 +1235,12 @@ static int br_ip6_multicast_query(struct net_bridge *br,
> >  	    (port && port->state == BR_STATE_DISABLED))
> >  		goto out;
> >  
> > +	/* RFC2710+RFC3810 (MLDv1+MLDv2) require link-local source addresses */
> > +	if (!(ipv6_addr_type(&ip6h->saddr) & IPV6_ADDR_LINKLOCAL)) {
> > +		err = -EINVAL;
> > +		goto out;
> > +	}
> > +
> 
> Shouldn't we allow empty source address, here?
> 
> Routers are supposed to drop them but bridges care. Linux uses ::
> as source address as long as no valid LL addresses are available,
> e.g. at boot-up (RFC3810 5.2.13.).

RFC3810, 5.2.13. refers to MLD reports, not queries, so that
shouldn't be relevant, section 5.1.14 should apply. Also the
bridge code only issues queries with a valid link-local source
address (see br_ip6_multicast_alloc_query() in
net/bridge/br_multicast.c). Where does Linux use :: for queries?

Cheers, Linus

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Kernel Discussion]     [TCP Instrumentation]     [Ethernet Bridging]     [Linux Wireless Networking]     [Linux WPAN Networking]     [Linux Host AP]     [Linux WPAN Networking]     [Linux Bluetooth Networking]     [Linux ATH6KL Networking]     [Linux Networking Users]     [Linux Coverity]     [VLAN]     [Git]     [IETF Annouce]     [Linux Assembly]     [Security]     [Bugtraq]     [Yosemite Information]     [MIPS Linux]     [ARM Linux Kernel]     [ARM Linux]     [Linux Virtualization]     [Linux IDE]     [Linux RAID]     [Linux SCSI]