The current IEEE802.15.4 stack assumes that a radio will never deliver packets with a bad CRC into the stack, as required by the standard. at86rf230 driven radios violates this assumption because of another incompatibility: devices are required to send ACKs if requested by a sender, but RF2xx will only send ACKs from a special receive mode that is currently not used by the driver. Enable this receive mode to fix both bugs. Frames with bad CRCs will not be received at all, and ACKs will be sent if so requested. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@xxxxxxxxxxxxxxxxxx> --- drivers/net/ieee802154/at86rf230.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 93123ae..8cd2d83 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -567,7 +567,7 @@ at86rf230_start(struct ieee802154_dev *dev) if (rc) return rc; - return at86rf230_state(dev, STATE_RX_ON); + return at86rf230_state(dev, STATE_RX_AACK_ON); } static void -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html