[PATCH 2/5] netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Daney <david.daney@xxxxxxxxxx>

Define two new "compatible" values for Ethernet
PHYs. "ethernet-phy-ieee802.3-c22" and "ethernet-phy-ieee802.3-c45"
are used to indicate a PHY uses the corresponding protocol.

If a PHY is "compatible" with "ethernet-phy-ieee802.3-c45", we
indicate this so that get_phy_device() can properly probe the device.

If get_phy_device() fails, it was probably due to failing the probe of
the PHY identifier registers.  Since we have the device tree telling
us the PHY exists, go ahead and add it anyhow with a phy_id of zero.
There may be a driver match based on the "compatible" property.

Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/phy.txt |   12 +++++++++++-
 drivers/of/of_mdio.c                          |   14 +++++++++++---
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index bb8c742..7cd18fb 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -14,10 +14,20 @@ Required properties:
  - linux,phandle :  phandle for this node; likely referenced by an
    ethernet controller node.
 
+Optional Properties:
+
+- compatible: Compatible list, may contain
+  "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
+  PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
+  specifications. If neither of these are specified, the default is to
+  assume clause 22. The compatible list may also contain other
+  elements.
+
 Example:
 
 ethernet-phy@0 {
-	linux,phandle = <2452000>
+	compatible = "ethernet-phy-ieee802.3-c22";
+	linux,phandle = <2452000>;
 	interrupt-parent = <40000>;
 	interrupts = <35 1>;
 	reg = <0>;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 2574abd..0f08aaf 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -79,11 +79,19 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 				mdio->irq[addr] = PHY_POLL;
 		}
 
+		if (of_device_is_compatible(child,
+					    "ethernet-phy-ieee802.3-c45"))
+			addr |= MII_ADDR_C45;
+
 		phy = get_phy_device(mdio, addr);
 		if (!phy || IS_ERR(phy)) {
-			dev_err(&mdio->dev, "error probing PHY at address %i\n",
-				addr);
-			continue;
+			phy = phy_device_create(mdio, addr, 0, NULL);
+			if (!phy || IS_ERR(phy)) {
+				dev_err(&mdio->dev,
+					"error creating PHY at address %i\n",
+					addr);
+				continue;
+			}
 		}
 
 		/* Associate the OF node with the device structure so it
-- 
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Kernel Discussion]     [TCP Instrumentation]     [Ethernet Bridging]     [Linux Wireless Networking]     [Linux WPAN Networking]     [Linux Host AP]     [Linux WPAN Networking]     [Linux Bluetooth Networking]     [Linux ATH6KL Networking]     [Linux Networking Users]     [Linux Coverity]     [VLAN]     [Git]     [IETF Annouce]     [Linux Assembly]     [Security]     [Bugtraq]     [Yosemite Information]     [MIPS Linux]     [ARM Linux Kernel]     [ARM Linux]     [Linux Virtualization]     [Linux IDE]     [Linux RAID]     [Linux SCSI]