Re: sky2 still badly broken

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On Thu, 03 May 2012 21:36:50 +0200
Niccolò Belli <darkbasic@xxxxxxxxxxxxxxx> wrote:

> Il 03/05/2012 17:23, Stephen Hemminger ha scritto:
> > The receiver on some versions of the chip can't keep up with full speed
> > of 1G bit/sec. The receive  FIFO has hardware issues, and since I don't
> > work for Marvell, working around the problem is guesswork.
> Just one question: if that is true why don't I have any problem with a 
> point to point gigabit link? I did transfer 3GB from ram to ram (ramfs) 
> at 100+MB/s without any issue in a point to point setup, as soon as I 
> attach it to the switch I have problems (very low transfer rate and tons 
> of rx errors).

I don't know but the PHY interaction is different with auto-crossover.
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at

[Linux Kernel Discussion]     [Ethernet Bridging]     [Linux Wireless Networking]     [Linux Bluetooth Networking]     [Linux Networking Users]     [VLAN]     [Git]     [IETF Annouce]     [Linux Assembly]     [Security]     [Bugtraq]     [Photo]     [Singles Social Networking]     [Yosemite Information]     [MIPS Linux]     [ARM Linux Kernel]     [ARM Linux]     [Linux Virtualization]     [Linux Security]     [Linux IDE]     [Linux RAID]     [Linux SCSI]     [Free Dating]

Add to Google Powered by Linux