Re: [PATCH v2] bonding: start slaves with link down for ARP monitor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Saturday 14 of April 2012 21:48EN, Jay Vosburgh wrote:
> 	Anybody got a 10 or 100 card laying around with fast autoneg to
> try?  Back in the day I used 3c59x and e100s, and I seem to recall
> that the 3c59x board I had was pretty speedy at going carrier up.
> >Jay? Andy? :)

It seems these cards are hard to find these days (I tried to find one in 
our office but no luck yet). However, I tried an onboard adapter with 
r8169 driver and patched kernel succeeded to detect carrier in time for 
bonding driver to start the slave in "up" state (and it started in 
"down" state with unplugged cable so that the detection is correct).

                                                        Michal Kubecek


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Kernel Discussion]     [TCP Instrumentation]     [Ethernet Bridging]     [Linux Wireless Networking]     [Linux WPAN Networking]     [Linux Host AP]     [Linux WPAN Networking]     [Linux Bluetooth Networking]     [Linux ATH6KL Networking]     [Linux Networking Users]     [Linux Coverity]     [VLAN]     [Git]     [IETF Annouce]     [Linux Assembly]     [Security]     [Bugtraq]     [Yosemite Information]     [MIPS Linux]     [ARM Linux Kernel]     [ARM Linux]     [Linux Virtualization]     [Linux IDE]     [Linux RAID]     [Linux SCSI]