[net 2/2] ixgbe: fix WoL issue with fiber

[Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>]

From: Don Skidmore <donald.c.skidmore@xxxxxxxxx>

There are times we turn of the laser before shutdown.  This is a bad thing
if we want to wake on lan to work so now we make sure the laser is on
before shutdown if we support WoL.

Signed-off-by: Don Skidmore <donald.c.skidmore@xxxxxxxxx>
Tested-by: Stephen Ko <stephen.s.ko@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 3e26b1f..dac7c01 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4893,6 +4893,16 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	if (wufc) {
 		ixgbe_set_rx_mode(netdev);
 
+		/*
+		 * enable the optics for both mult-speed fiber and
+		 * 82599 SFP+ fiber as we can WoL.
+		 */
+		if (hw->mac.ops.enable_tx_laser &&
+		    (hw->phy.multispeed_fiber ||
+		    (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber &&
+		     hw->mac.type == ixgbe_mac_82599EB)))
+			hw->mac.ops.enable_tx_laser(hw);
+
 		/* turn on all-multi mode if wake on multicast is enabled */
 		if (wufc & IXGBE_WUFC_MC) {
 			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html